Hyundai H-1624 User Manual [ru]
H-1624
RADIO RECEIVER
РАДИОПРИЕМНИК
Руководство по эксплуатации Instruction manual
Instruction manual Instruction manual
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in future.
Description
Top panel
1. SD/MMC memory card slot
2. button
3. button
4. VOL-/VOL+ buttons
5. RADIO button
6. SNOOZE button
7. USB port
8. button
9. LIGHT button
10. SET button
11. MODE button
12. ALARM button
1
2
3
4
5
6
7
8
9
10
11
12
Back panel
1. Handle
2. Telescopic FM-antenna
3. Power (DC7.5V) input
4. AUX input
5. Battery compartment
Not indicated: display (front panel), speaker
(front panel)
2 3
1
2
3
4
5
Remote controller
5
1
2
3
4
1.
button
2. SET button
3. MODE button
4. RADIO button
5. SNZ button (corresponds to SNOOZE
button on the unit)
6. ALM button (corresponds to ALARM button
on the unit)
7. VOL+/VOL- buttons
8. / buttons (correspond to /
buttons on the unit)
6
7
8
Important safeguards
• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer the manual.
Keep the manual for use in future.
• Do not hit or drop the unit.
• Do not expose the unit to vibration, direct
sunlight, too high or low temperature or humidity.
• Do not disassemble the unit yourself.
Refer servicing to qualified service personnel.
• When the battery is exhausted, it should
be removed from the set to prevent leakage.
Power supply
Battery power
• Open the battery compartment cover.
Insert 5 AA (1.5 V) batteries. Please observe
correct battery polarities or the unit will not
work. Close the battery compartment cover.
• When the batteries are exhausted, they
should be replaced.
• Do not use new and old batteries together.
• Disconnect power cord from the socket,
when the unit is on battery supply. Battery
power is automatically disconnected when the
power cord is connected to a power socket.
AC adaptor power
• Plug the supplied AC/DC power adaptor into
the power input on the back of the unit. Connect
the power cord to the AC household main outlet.
Make sure the voltage is compatible.
• Always remember to disconnect the
power cord from the main supply before
disconnecting it from the unit.
• Disconnect the power cord from the mains
when not in use.
Additional power
There are 2 batteries AG3 (1.5 V) in the
terminal inside the battery compartment. This
is additional power intended for operation
of clock, alarm, calendar, termometer and
countdown timer. Without the additional power
the unit will function only as radio receiver.
General operations
Clock and calendar
• In clock mode (no ALARM indication)
press and hold SET button to enable time
setting mode. Press repeatedly SET button
to go to setting of parameters in following
sequence: minute => hour => 12/24-hour
=> year => month => date. The selected
parameter will blink meaning readiness for
Instruction manual
adjustment. The default time setting is 01-01,
2009, THU, 12-hour, AM12:00.
• Press VOL+ button to adjust the parameter
up. Press VOL- button to adjust the parameter
down.
• Day of week will be set automatically.
• In time setting mode, if no button is
pressed within 30 seconds after a parameter
is selected, the unit will automatically return to
clock mode.
• In time setting mode, press MODE button
to return to clock mode.
Termometer
The unit is equipped with a built-in
termometer. The current temperature is
updated every 30 seconds and is shown on the
display. In clock mode press VOL- button to
select Celsius or Fahrenheit termometer mode.
AUX input
To connect an external audio device (eg.
MP3-player), please use a standard stereo
cable with 3.5 mm to 3.5 mm plugs to connect
the audio line-out of the external device to the
AUX input socket of this unit.
Backlight
Press LIGHT button on the unit to switch on/
off the display backlight.
Radio operation
• Radio reception is only available when AA/
UM3 battery power or AC adaptor power is used.
• In clock mode press RADIO button to
switch the FM radio on.
• For FM reception extend the telescopic
antenna.
• To adjust the frequency step by step
press repeatedly / buttons. For automatic
search of a station, press and hold or
button; the unit will look for the next available
station and start its broadcast. Repeat the
operation to search more stations.
• To save a station, press and hold SET
button. The memory position will blink. Press
VOL+/VOL- buttons to select a memory
position. Press SET button to save the current
station under the selected number. You can
maximum 20 stations in the memory.
During program saving, if no button is
pressed within several seconds, the unit will
return to normal radio mode.
• To call a saved station, press SET button,
then press VOL+/VOL- buttons.
• To adjust volume, in radio mode press
repeatedly VOL+/VOL- buttons.
• To switch off the radio, press MODE button.
USB/SD/MMC operation
Connecting USB/SD/MMC
• Insert a USB device into the USB port or
insert a memory card into the memory card
slot. Press button to enable USB/SD/MMC
mode. The unit will start reading the device,
LOAD will be displayed. Press and hold
button to select between USB or SD/MMC
mode, if both devices are inserted (USB is
played by default). If no device is detected, NO
CARD will be dislpayed.
• When the device and tracks on it are
detected, the display shows the total number of
tracks, currently playing track number, playback
time, equalizer mode and other playback
information. If no tracks are found in the
storage device, NO SONG will be displayed.
Playback operations
• During playback press button to pause
playback. Press this button again to resume
playback.
• During playback press / buttons to
go to previous or next track.
• To adjust volume, press repeatedly VOL+/
VOL- buttons.
• During playback press SET button, then
press VOL+/VOL- buttons to select equalizer
mode: Normal - Classic - Bass - Live - Rock.
4
Loading...