CAUTION:
Severe engine and transaxle damage may result from the use of poor quality fuels and
lubricants that do not meet Hyundai specifications. You must always use high quality fuels
and lubricants that meet the specifications listed on Page 9-4 in the Vehicle Specifications
section of the Owner's Manual.
A000A01A-GAT
This Owner's Manual should be considered a part of the car and remain with it when it is sold for the use of the
next owner.
OWNER'S I.D.
ORIGINAL:
ADDRESS:
DATE OF SALE:
SUBSEQUENT:
ADDRESS:
TRANSFER DATE:
NAME:
STREET:
TOWN:
COUNTRY:
P.CODE:
NAME:
STREET:
TOWN:
COUNTRY:
P.CODE:
OWNER'S MANUAL
A030A01GK-GAT
Operation
Maintenance
Specifications
HGK037
All information in the Owner's Manual is current at the time of publication. Hyundai reserves the right to make
changes at any time as part of our policy of continual product improvement may be carried out.
This manual applies to current Hyundai Coupe/Tiburon models and explanations of optional as well as standard
equipment are included. As a result, you may find material in this manual that does not apply to your specific
vehicle.
Please note that some Coupe/Tiburon models are equipped with Right-Hand Drive (RHD). The explanations and
illustrations for some operations in RHD models are opposite of those written in this manual.
A020A01A-AAT
RESPONSIBILITY FOR MAINTENANCE
The maintenance requirements for your new Hyundai are found in Section 5. As the
owner, it is your responsibility to see that all maintenance operations specified by the
manufacturer are carried out at the appropriate intervals. When the vehicle is used
in severe driving conditions, more frequent maintenance is required for some
operations. Maintenance requirements for severe operating conditions are also
included in Section 5.
A040A01A-AAT
FOREWORD
Thank you for choosing Hyundai. We are pleased to welcome you to the growing number of
discriminating people who drive Hyundais. The advanced engineering and high-quality construction of each Hyundai we build is something of which we're very proud.
Your Owner's Manual will introduce you to the features and operation of your new Hyundai. It is
suggested that you read it carefully because the information it contains can contribute greatly to
the satisfaction you receive from your new car.
The manufacturer also recommends that all service and maintenance on your car be performed
by an authorized Hyundai dealer. Hyundai dealers are prepared to provide high-quality service,
maintenance and any other assistance that may be required.
A050A05A-AAT
HYUNDAI MOTOR COMPANY
Note: Because future owners will also need the information included in this manual, if you sell this
Hyundai, please leave the manual in the vehicle for their use. Thank you.
!
Copyright 2005 Hyundai Motor Company. All rights reserved. No part of this publication may be
reproduced, stored in any retrieval system or transmitted in any form or by any means without the
prior written permission of Hyundai Motor Company.
A070A01A-GAT
Modification of components may void the manufacturer's warranty
Your Hyundai should not be modified in any way. Modifications may adversely affect
the safety, durability and performance of your Hyundai. Components which are
subjected to modification or are added to the vehicle resulting in consequential
damage are not covered by the vehicle manufacturer's warranty.
!
CAUTION: MODIFICATIONS TO YOUR HYUNDAI
A080A01S-AAT
TWO-WAY RADIO OR CELLULAR TELEPHONE INSTALLATION
Your vehicle is equipped with electronic fuel injection and other electronic components. It is possible for an improperly installed/adjusted two-way radio or cellular
telephone to adversely affect electronic systems. For this reason, we recommend
that you carefully follow the radio manufacturer's instructions or consult your Hyundai
dealer for precautionary measures or special instructions if you choose to install one
of these devices.
A090A01A-AAT
SAFETY AND VEHICLE DAMAGE WARNING
This manual includes information titled as WARNING, CAUTION and NOTE.
These titles indicate the following:
!
WARNING:
This indicates that a condition may result in harm, serious injury or death to
you or other persons if the warning is not heeded. Follow the advice provided
with the warning.
!
CAUTION:
This indicates that a condition may result in damage to your vehicle or its
equipment if the caution is not heeded. Follow the advice provided with the
caution.
NOTE:
This indicates that interesting or helpful information is being provided.
A100A01L-GAT
GUIDE TO HYUNDAI GENUINE
PARTS
1.What are Hyundai Genuine Parts?
Hyundai Genuine Parts are the same
parts used by Hyundai Motor Company to manufacture vehicles. They
are designed and tested for the
optimum safety, performance, and
reliability to our customers.
2. Why should you use genuine parts?
Hyundai Genuine Parts are engineered and built to meet rigid manufacturing requirements. Using imi-
tation, counterfeit or used salvage
parts are not covered under the
Hyundai New Vehicle Limited Warranty or any other Hyundai warranty. In addition, any damage to or
failure of Genuine Hyundai Parts
caused by the installation or failure
of an imitation, counterfeit or used
salvage part is not covered by
Hyundai Motor Company.
3. How can you tell if you purchasing
Hyundai Genuine Parts?
Look for the Hyundai Genuine Parts
Logo on the package (see below).
The export specifications are written in English only.
Hyundai Genuine Parts are only
sold through authorized Hyundai
Dealership and Service Center.
A100A03L
A100A01L
A100A02LA100A04L
TABLE OF CONTENTS
SECTION
FEATURES OF YOUR HYUNDAI
DRIVING YOUR HYUNDAI
WHAT TO DO IN AN EMERGENCY
CORROSION PREVENTION & APPEARANCE CARE
VEHICLE MAINTENANCE REQUIREMENTS
DO-IT-YOURSELF MAINTENANCE
EMISSION CONTROL SYSTEMS
CONSUMER INFORMATION
VEHICLE SPECIFICATIONS
INDEX
1
2
3
4
5
6
7
8
9
10
B250A01GK-GAT
INSTRUMENTS AND CONTROLS
(LEFT-HAND DRIVE)
B250A01GK
1. Head Light Leveling Device Switch (If installed)
2. Electronic Stability Program (ESP) Switch (If installed)
3. Panel Brightness Control Knob
(Rheostat Switch) (If installed)
4. Multi-Function Light Switch
5. Windshield Wiper/Washer Switch
6. Front Fog Light Switch (If installed)
7. Rear Fog Light Switch (If installed)
8. Hazard Warning Switch
9. Digital Clock
10.Front Seat Warmer (If installed)
11.Passenger's Air Bag (If installed)
12.Passenger's Drink Holder
!
CAUTION:
When installing a container of liquid air freshener inside the vehicle, do not place it near the
instrument cluster nor on the instrument panel surface. If there is any leakage from the air
freshener onto these areas (Instrument cluster, instrument panel or air ventilator), it may
damage these parts. If the liquid from the air freshener does leak onto these areas, wash them
with water immediately.
13.Hood Release Lever
14.Fuse Box Relay
15.Steering Wheel Tilt Lever
16.Horn and Driver's Airbag
17.Cruise Control Switch (If installed)
18.Audio System (If installed)
19.Heating and Airconditioning Control Panel
20.Ashtray
21.Cigarette Lighter
22.Shift Lever
23.Multi Guage (If installed)
24.Parking Brake Lever
25.Glove Box
26.Center Console
B250B01GK-GAT
INSTRUMENTS AND CONTROLS
(RIGHT-HAND DRIVE)
B250A01GK-R
1. Passenger's Drink Holder
2. Passenger's Air Bag (If installed)
3. Front Fog Light switch (If installed)
4. Rear Fog Light Switch (If installed)
5. Digital Clock
6. Hazard Warning Switch
7. Front Seat Warmer (If installed)
8. Windshield Wiper/Washer Switch
9. Multi-Function Light Switch
10.Panel Brightness Control Knob
(Rheostat Switch) (If installed)
11.Electronic Stability Program (ESP) Switch (If installed)
When installing a container of liquid air freshener inside the vehicle, do not place it
near the instrument cluster nor on the instrument panel surface. If there is any
leakage from the air freshener onto these areas (Instrument cluster, instrument panel
or air ventilator), it may damage these parts. If the liquid from the air freshener does
leak onto these areas, wash them with water immediately.
YOUR VEHICLE AT A GLANCE
B255A02GK-GAT
INDICATOR SYMBOLS ON THE INSTRUMENT PANEL
Turn Signal Indicator Lights
ABS Service Reminder Indicator (If installed)
High Beam Indicator Light
Low Oil Pressure Warning Light
Parking Brake/Brake Fluid Level Warning Light
Charging System Warning Light
Door Ajar Warning Light
(If installed)
Low Fuel Level Warning Light
* More detailed explanations of these items will be found beginning on page 1-42.
Tail Gate Open Warning Light
SRS (Airbag) Service Reminder Indicator
(SRI)(If installed)
Malfunction Indicator Light (If installed)
Seat Belt Warning Light
CRUISE Indicator Light (If installed)
CRUISE SET Indicator Light (If installed)
Electronic Stability Program (ESP)
Indicator Light (If installed)
For Europe – For the optimal vehicle
performance, we recommend you to
use unleaded gasoline with an octane
rating of RON (Research Octane Number) 95 /AKI (Anti Knock Index) 91 or
higher.
You may use unleaded gasoline with an
octane rating of RON 91~94/AKI 87~90
but it may result in slight performance
reduction of the vehicle.
Except Europe – Unleaded gasoline
with a Pump Octane Rating of 87 (Research Octane Number 91) or higher
must be used in Hyundai vehicle.
If leaded gasoline is used, it will cause
the catalytic converter to become ineffective and the emission control system to malfunction.
This can also result in increased maintenance expense. To avoid accidental
use of leaded fuel, the large nozzle
used with leaded gasoline at service
stations can not be inserted into fuel
tank opening of Hyundai vehicle.
NOTE:
o For some countries, Hyundai
vehicles are designed to use
leaded gasoline. When you are
going to use leaded gasoline,
ask to Hyundai dealer whether
leaded gasoline in your vehicle
is available or not.
o Octane Rating of leaded gaso-
line is same with unleaded one.
B010B01A-AAT
What About Gasohol?
Gasohol (a mixture of 90% unleaded
gasoline and 10% ethanol or grain
alcohol) may be used in your Hyundai.
However, if your engine develops
driveability problems, the use of 100%
unleaded gasoline is recommended.
Fuels with unspecified quantities of
alcohol, or alcohols other than ethanol,
should not be used.
B010D01S-AAT
Do not Use Methanol
Fuels containing methanol (wood alcohol) should not be used in your
Hyundai. This type of fuel can reduce
vehicle performance and damage components of the fuel system.
!
CAUTION:
Your Hyundai's New Vehicle Limited Warranty may not cover damage to the fuel system and performance problems that are caused by
the use of methanol or fuels containing methanol.
B010E01A-AAT
Gasolines for Cleaner Air
To help contribute to cleaner air,
Hyundai recommends that you use
gasolines treated with detergent additives, which help prevent deposit formation in the engine. These gasolines
will help the engine run cleaner and
enhance performance of the Emission
Control System.
B010F01A-AAT
Operation in Foreign Countries
If you are going to drive your Hyundai
in another country, be sure to:
o Observe all regulations regarding
registration and insurance.
o Determine that acceptable fuel is
available.
BREAKING IN YOUR NEW
HYUNDAI
B020A01S-GAT
During the First 2,000 Km (1,200
Miles)
No formal "break-in" procedure is required with your new Hyundai. However, you can contribute to the economical operation and durability of your
Hyundai by observing the following
recommendations during the first 2,000
km (1,200 miles).
o Don't drive faster than 88 km/h (55
mph).
o While driving, keep your engine
speed (rpm, or revolutions per
minute) between 2,000 rpm and
4,000 rpm.
o Use moderate acceleration. Don't
start, depress the accelerator pedal
fully.
o For the first 300 km (200 miles), try
to avoid hard stops.
o Don't lug the engine (in other words,
don't drive so slowly. In too high a
gear that the engine "bucks" shift to
a lower gear).
FEATURES OF YOUR HYUNDAI
o Whether going fast or slow, vary
your speed from time to time.
o Don't let the engine idle longer than
3 minutes at one time.
o Don't tow a trailer during the first
2,000 km (1,200 miles) of operation.
1
3
FEATURES OF YOUR HYUNDAI
1
KEYSIMMOBILIZER SYSTEM
4
B030A01A-AAT
B030A01E
For greater convenience, the same
key operates all the locks in your
Hyundai. However, because the doors
can be locked without a key, carrying a
spare key is recommended in case
you accidentally lock one key inside
the car.
B030B01S-AAT
Record Your Key Number
B030B01E
A code number is stamped on the key
number plate that came with the keys
to your Hyundai. This key number plate
should be kept in a safe place, not in
the vehicle. The key number should
also be recorded in a place where it
can be found in an emergency.
If you need additional keys, or if you
should lose your keys, your authorized
Hyundai dealer can make new keys if
you can supply the key number.
B880A01A-GAT
(If Installed)
The immobilizer system is an anti-theft
device, designed to deter automobile
theft.
B880B04A-GAT
Keys
AX10020A-1
All of the locks fitted to the vehicle are
operated by the same key. However,
since it is possible to lock the doors
without the use of the key, care should
be exercised to ensure that the key
does not become locked inside the
vehicle by mistake.
FEATURES OF YOUR HYUNDAI
1
5
NOTE:
If you make your own duplicate key,
you will not be able to cancel the
system or start the engine.
!
CAUTION:
When staring the engine, do not
use the key with other immobilizer
keys around. Otherwise the engine
may not start or may stop soon
after it starts.
Keep each key separately not to
have any malfunction after you receive your new vehicle.
B880C02A-GAT
Key Numbers
AX10030A-1
The vehicle key number is recorded
upon a metal tag attached to the keys
when the vehicle is first delivered to
you.
The key number should be recorded
and kept in a safe place in case the
need to order further keys arises. New
keys are available from any Hyundai
dealer by quoting the relevant key
number.
In the interest of security, the metal tag
attached to the keys which bears the
key number should be removed from
the key ring after you receive your new
vehicle. In addition, key numbers cannot be provided by Hyundai for security reasons.
If you need additional keys or if you
should lose your keys, your authorized
Hyundai dealer can make new keys.
FEATURES OF YOUR HYUNDAI
1
6
B880D02A-GAT
Limp Home Procedures
B880D01GK
In case the immobilizer warning indicator blinks for five seconds when the
ignition key is turned to "ON" position,
this indicates that the immobilizer system is out of order. And you cannot
start the engine without the limp home
procedures with ignition key.
The following procedure is how to start
the engine with the function of the limp
home (0, 1, 2, 3 as a sample password).
NOTE:
You can get the limp home password when the vehicle is first delivered to you. If you do not have the
password, consult your authorized
Hyundai dealer.
1. To set the password you may turn
the ignition key "ON" and then turn
it "OFF" according to the digit numbers, then the immobilizer indicator
will blink along with the operation of
the ignition key. For example, turn
the ignition key once for digit number "1", and twice for "2", and so on.
However, for the digit number "0",
you must turn the ignition key for 10
times.
2. Wait for 3~10 seconds.
3. You may set the remaining number
of digits by following the same procedures 1 and 2.
4. If all of four digits have been tried
successfully, turn the ignition key
"ON" and check that the immobilizer indicator illuminates. From this
time, you have to start your engine
within 30 seconds. If you start your
engine after 30 seconds, your engine will not start.
NOTE:
If the engine dies while driving after
limp home procedure, you can start
your engine within 8 seconds without limp home procedure again.
5. If the immobilizer indicator blinks for
five seconds, you have to try the
limp home procedure again from
the beginning.
After doing the limp home procedure,
you have to consult with your authorized Hyundai dealer as soon as possible.
!
CAUTION:
o If you fail to try the limp home
procedure with the sequence of
three times, you have to wait for
about one hour to do the limp
home procedure again.
o If you cannot start your engine in
spite of limp home procedure,
have your vehicle towed by an
authorized Hyundai dealer.
DOOR LOCKS
FEATURES OF YOUR HYUNDAI
1
7
B030C01Y-AAT
ILLUMINATED IGNITION
SWITCH (If installed)
B030C01E-1
Whenever a door is opened, the ignition switch will be illuminated for your
convenience, provided the ignition
switch is not in the "ON" position.
The light will go off approximately 10
seconds after closing the door or when
the ignition switch is turned on.
B040A02Y-AAT
!
WARNING:
o Unlocked doors can be danger-
ous. Before you drive away (especially if there are children in
the car), be sure that all the doors
are securely closed and locked
so that the doors cannot be inadvertently opened from the inside.
This helps ensure that the doors
will not be opened accidentally.
Also, when combined with the
proper use of seat belts, locking
the doors helps keep occupants
from being ejected from the car
in case of an accident.
o Before opening the door, always
look for and avoid oncoming traffic.
o In case of accident, the door is
unlocked automatically (If installed).
B040B01A-AAT
Locking and Unlocking Front
Doors With a Key
LOCK
o The door can be locked or unlocked
with a key.
o Lock the door by turning the key
toward the front of the vehicle and
unlock it by turning the key toward
the rear.
UNLOCK
HGK2008
FEATURES OF YOUR HYUNDAI
1
8
B040C01S-AAT
Locking From the Outside
HGK2009
The doors can be locked without a key.
To lock the doors, first push the inside
lock switch to the "LOCK" position so
that the red mark on the switch is not
visible, then close the door.
NOTE:
o When locking the door this way,
be careful not to lock the door
with the ignition key left in the
vehicle.
o To protect against theft, always
remove the ignition key, close all
windows, and lock all doors when
leaving your vehicle unattended.
B040D01S-AAT
Locking From the Inside
UNLOCK
LOCK
HGK2010
To lock the doors from the inside,
simply close the door and push the
lock switch to the "LOCK" position.
When this is done, neither the outside
nor the inside door handle can be
used.
NOTE:
When the door is locked, the red
mark on the switch is not visible.
B040G02GK-GAT
Central Door Lock
HGK2009
The central door locking is operated by
pushing the driver's door lock switch
toward the front or rear of the vehicle.
If the passenger door is open when the
switch is pushed, the door will remain
locked when closed.
THEFT-ALARM SYSTEM
FEATURES OF YOUR HYUNDAI
1
9
NOTE:
o When pushing the switch toward
the rear, all doors will unlock.
When pushing the switch toward
the front, all doors will lock.
o When the door is unlocked, the
red mark on the switch is visible.
o The central door locking is oper-
ated by turning the key (driver's
door only) toward the front or
rear of the vehicle.
o If the door is locked/unlocked mul-
tiple times in rapid succession
with either the vehicle key or door
lock switch, the system may stop
operating temporarily in order to
protect the circuit and prevent
damage to system components.
B070A01A-AAT
(If Installed)
This system is designed to provide
protection from unauthorized entry into
the car. This system is operated in
three stages: the first is the "Armed"
stage, the second is the "Alarm" stage,
and the third is the "Disarmed" stage.
If triggered, the system provides an
audible alarm with blinking of the turn
signal light.
B070B02GK-AAT
Armed Stage
Park the car and stop the engine. Arm
the system as described below.
1) Remove the ignition key from the
ignition switch.
2) Make sure that the engine hood and
tail gate are closed and latched.
3) Lock the doors using the transmitter
of the keyless entry system.
NOTE:
1) If any door, tail gate or engine
hood remains open, the system
will not be armed.
2) If this happens, rearm the system
as described above.
3) Once the system is armed, only
the tail gate may be unlocked
using the key without disarming
the system.
!
CAUTION:
Do not arm the system until all
passengers have left the car. If the
system is armed while a
passenger(s) remains in the car,
the alarm may be activated when
the remaining passenger(s) leaves
the car.
After completion of the steps above,
the turn signal light will blink once to
indicate that the system is armed.
FEATURES OF YOUR HYUNDAI
1
10
B070C01GK-GAT
Alarm Stage
The alarm will be activated if any of the
following occur while the car is parked
and the system is armed.
1) A front door is unlocked and opened
without using the transmitter.
2) The tail gate is opened without using the key.
3) The engine hood is opened.
The siren will sound and the turn signal
lights will blink continuously for 30 seconds. (E.C only/Except E.C : This happens 3 times). To turn off the system,
unlock the door with the transmitter.
!
CAUTION:
Avoid trying to start the engine while
the system is armed.
B070D04GK-AAT
Disarmed Stage
LOCK
UNLOCK
The system will be disarmed when
either of the following steps are taken:
1) The driver's or passenger's door is
unlocked by depressing the "UNLOCK" button on the transmitter.
2) In the middle of alarming or after
alarming, it disarms after 30 seconds if the key is turned to and kept
in the "ON" position.
After completing one of steps above,
the turn signal light will blink twice to
indicate that the system is disarmed.
HGK102
NOTE:
If any door, tail gate or engine hood
is not opened within 30 seconds,
the system will be rearmed.
B075E01O-AAT
Panic Warning
PANIC
HGK102
1. Push the "PANIC" button on the
transmitter.
2. At the same time, the siren will sound
and the turn signal lights will blink for
30 seconds.
3. To turn off the system, push the
"PANIC" button again on the transmitter.
FEATURES OF YOUR HYUNDAI
1
11
B070F02A-GAT
KEYLESS ENTRY SYSTEM
(If installed)
Locking doors
1. Close all doors.
2. Push the "LOCK" button on the transmitter.
3. At the same time all doors lock, the
turn signal lights will blink once to
indicate that the system is armed.
Unlocking doors
1. Push the "UNLOCK" button on the
transmitter.
2. At the same time all doors unlock,
the turn signal lights will blink twice
to indicate that the system is disarmed.
NOTE:
The transmitter will not work if any of
following occur:
- The ignition key is in ignition
switch.
- You exceed the operating distance
limit (10 m).
- The battery in the transmitter is
weak.
- Other vehicles or objects may be
blocking the signal.
- The weather is extremely cold.
- The transmitter is close to a radio
transmitter such as a radio station
or an airport which can interfere
with normal operation of the transmitter.
When the transmitter does not work
correctly, open and close the door
with the ignition key. If you have a
problem with the transmitter, contact an authorized Hyundai Dealer.
NOTE:
Keep the transmitter away from water or any liquid. If the keyless entry
system is inoperative due to exposure to water or liquids, it will not be
covered by your manufacturer vehicle warranty.
B070E02GK-GAT
Replacing the battery
When the transmitter's battery begins
to get weak, it may take several pushes
on the button to lock or unlock the
doors, and the LED will not light. Replace the battery as soon as possible.
Battery type : CR2032
Replacement instructions:
Screwdriver
HGK122
1. Carefully separate the case with a
blade screwdriver as shown in the
illustration.
FEATURES OF YOUR HYUNDAI
1
12
POWER WINDOW
Battery
HGK121
2. Remove the old battery from the
case and note the polarity. Make
sure the polarity of the new battery
is the same(+side facing down), then
insert it in the transmitter.
3. Installation is the reverse order of
disassembly.
NOTE:
Install a new battery within 30 seconds after removing the old one. If
installing a new battery takes more
than 30 seconds, take the following
steps.
1) Turn the ignition key to the "ACC"
position.
2) Make sure that the turn signal
lights blink once by pushing the
"LOCK" or "UNLOCK" button on
the transmitter.
B050A02GK-AAT
(1)
HGK2015
The power windows operate only when
the ignition key is in the "ON" position.
The main switches are located on the
driver's arm rest and control the front
windows on the respective sides of the
vehicle. The windows may be opened
by depressing the front portion of the
switch. To stop at the desired opening,
release the switch. The window may
be closed by pulling the front portion of
the switch. In order to prevent operation of the passenger front window by
the passenger, a window lock switch
(1) is provided on the arm rest of the
driver's door. To disable the
SEATS
FEATURES OF YOUR HYUNDAI
1
13
passenger's power window, push the
window lock switch. To revert to normal operation, push in on the window
lock switch again.
HGK2016
!
WARNING:
1) Be careful that someone's head,
hands and body are not trapped
by a closing window.
2) Never try to operate the main
switch on the driver's door and
the individual door window
switch in opposing directions at
the same time. If this is done, the
window will stop and cannot be
opened or closed.
3) Do not leave children alone in the
car. Always remove the ignition
key for their safety.
Auto-Down Window
(Driver's Side) (If Installed)
B050A02GK
The Auto-Down window is moved to its
fully open position by pushing the
switch. To stop at the desired position
push in on the switch again.
B080A01A-AAT
ADJUSTABLE FRONT SEATS
!
WARNING:
Never attempt to adjust the seat
while the vehicle is in motion. This
could result in loss of control or an
accident which may cause death,
serious injury or property damage.
FEATURES OF YOUR HYUNDAI
1
14
B080B02A-AAT
Adjusting Seat Forward and
Rearward
To move the seat toward the front or
rear, pull the lock release lever upward. This will release the seat on its
track so you can move it forward or
rearward to the desired position. When
you find the position you want, release
the lever and slide the seat forward or
rearward on its track until it locks into
the desired position and cannot be
moved further.
HGK2027
WARNING:
To ensure the seat is locked securely, attempt to move the seat
forward or rearward without using
the lock release lever.
B080C01A-AAT
Adjusting Seatback Angle
HGK2028
To recline the seatback, lean forward to
take your weight off it, then pull up on
the recliner control lever at the outside
edge of the seat. Now lean back until
the desired seatback angle is achieved.
To lock the seatback into position,
release the recliner control lever.
!!
WARNING:
To minimize risk of severe injury in
the event of a collision or a sudden
stop, both the driver's and
passenger's seatbacks should always be in an upright position while
the vehicle is in motion. The protection provided by the seat belts and
airbags in a frontal collision may be
reduced significantly when the seat
backs are reclined. There is greater
risk that the driver and passenger
will slide under the seat belt which
may result in serious injury if a
crash occurs when the seatbacks
are reclined. The seat belt cannot
provide full protection to an occupant if the seat back is reclined.
FEATURES OF YOUR HYUNDAI
1
15
B080D02JM-AAT
Adjustable Headrests
Lock Knob
HGK2032
Headrests are designed to help reduce
the risk of neck injuries.
To raise the headrest, pull it up. To
lower it, push it down while pressing
the lock knob. To remove the headrest, raise it as far as it can go then
press the lock knob while pulling upward.
!
WARNING:
B080D01JM
o For maximum effectiveness in case
of an accident, the headrest should
be adjusted so the middle of the
headrest is at the same height as
the top of the occupant's eyes.
The use of a cushion that holds
the body away from the seatback
is not recommended.
o Do not operate the vehicle with the
headrests removed as severe injury to an occupant may occur in
the event of an accident. Headrests may provide protection
against severe neck injuries when
properly adjusted.
o Do not adjust the headrest hejght
while the vehicle is in motion.
FEATURES OF YOUR HYUNDAI
1
16
B080E01F-AAT
Lumbar Support Control
(Driver's seat only) (If Installed)
SOFT
FIRM
HGK2030
The driver's seat is equipped with adjustable lumbar support.
To increase the amount of lumbar support, pull the lever forward.
To decrease it, push the lever toward
the rear.
To raise or lower the front part of the
seat cushion, turn the knob forward or
rearward.
B100A02HP-GAT
SEAT WARMER (If Installed)
HGK2033
The seat warmer is provided to warm
the front seats during cold weather.
With the ignition key in the "ON" position, push either of the switches to
warm the driver's seat or the
passenger's seat.
During mild weather or under conditions where the operation of the seat
warmer is not needed, keep the
switches in the "OFF" position.
Loading...
+ 448 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.