Hydra-Tech S4CSL User Manual
4” HYDRAULIC SUBMERSIBLE
SAND / SLURRY PUMP with AGITATOR
MODEL S4CSL
4” (100 mm) Discharge
The S4CSL pump is designed to use in
applications requiring settled solids to be put
into suspension and pumped with the
discharge water. Primary applications include
de-silting ponds, lakes and streams. Other
jobs may include filling sand bags to prevent
beach erosion, tank and digester cleaning or
pumping sediment from caissons.
FEATURES
Hardened Alloy Wear Parts
•
Built-in Agitator for stirring up solids
•
Oil Lubricated Seals (can run dry)
•
Variable Speed hydraulic drive
•
Small Size allows pump to fit through a
•
17 inch opening
Safe Hydraulic Drive can be used where
•
electric power is hazardous or impractical
Dependable gear type hydraulic motor
•
Operates with our HT20 to HT35 power
•
units or other hydraulic power sources
capable of flows to 17 GPM
C0413
SPECIFICATIONS
WEIGHT:.......................................... 273 lbs. (124 kg)
HEIGHT:................................................... 31" (79 cm)
WIDTH (@ widest point):....................16 1/4" (41 cm)
DISCHARGE:................................................. 4" NPT
SOLIDS HANDLING:......................... 1 1/2" (38 mm)
HOSE PORTS:..........................1/2" and 3/4" NPT (F)
VOLUTE*:................................ Hardened Ductile Iron
IMPELLER:................................... High Chrome Alloy
WEAR PLATE............................... High Chrome Alloy
AGITATOR:.................................. High Chrome Alloy
SHAFT:........................................ 304 Stainless Steel
SHAFT SEALS: (upper)................... Carbon/Ceramic
(Lower)..................... Silicon Carbide
HYDRAULIC OIL:...... 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW:........................ Max 17 GPM (64 LPM)
OPERATING PRESSURE:... Max 2800 PSI (190 Bar)
POWER SOURCE:.. Any Open Center Hydraulic System
* Optional NI-Hard volute available for highly abrasive applications
Specifications are subject to change without notice
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website: www.hydra-tech.com E-Mail: htpump@hydra-tech.com
Model S4CSL Overall Dimensions
31"
16 1/4"
(41cm)
(79cm)
14"
16 1/4"
(36cm)
(41cm)
HYDRAULIC INPUT:
(A) 10 GPM @ 850 - 1250 PSI
(B) 12 GPM @ 900 - 1500 PSI
(C)* 14 - 15.6 GPM @ 1700 - 2100 PSI
(D) 17 GPM @ 1700 - 2750 PSI
* Typical Performance with
HT25 Power Unit
0
135
120
105
90
75
60
45
30
15
15
30
41
U.S.G.P.M.
Liters/Minute
Feet
Meters
450
A
B
C
D
CAPACITY
TOTAL HEAD
75
150
225
300
375
450
525
600
675
750
900
1350
1800
2250
2700
S4CSL Typical Performance
Curves are based on pumping water at 60°F. For performance curves other than shown above, consult factory.
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website: www.hydra-tech.com E-Mail: htpump@hydra-tech.com
Loading...