Hydra-Tech S3TCDI User Manual
3” HYDRAULIC SUBMERSIBLE
UTILITY PUMP
MODEL S3TC (Aluminum Body)
MODEL S3TCDI (Ductile Iron Body)
3” (75 mm) Discharge
Our S3TC is a very portable and versatile
utility pump designed for pumping jobs such
as construction sites, manhole pumping and
oil skimming. An efficient channel impeller
offers excellent overall performance. This
pump is offered in your choice of aluminum
or ductile iron body.
FEATURES
Stainless Steel Channel Impeller
•
Oil Lubricated Seals (can run dry)
•
Variable Speed hydraulic drive
•
Small overall size for use tight spaces
•
Can be bolted directly into a pipeline
•
Safe Hydraulic Drive can be used where
•
electric power is hazardous or impractical
Dependable gear type hydraulic motor
•
Operates with our HT11 to HT15 power
•
units or other hydraulic power sources
capable of flows of 5-8 GPM
C0109
SPECIFICATIONS
WEIGHT S3TC:............................................ 28 lbs. (13 kg)
S3TCDI:........................................ 52 lbs. (24 kg)
HEIGHT:..............................................................14" (36 cm)
WIDTH (@ widest point):.............................. 11 3/4" (30 cm)
DISCHARGE:....................................................... 3" NPT(F)
INLET FLANGE:............................................... 3" 125# ASA
SOLIDS HANDLING:........................................... 3/4" (2 cm)
HOSE PORTS:..................................................1/2" NPT (F)
PUMP BODY S3TC:........................................... Aluminum
S3TCDI:...................................... Ductile Iron
IMPELLER:................................................... Stainless Steel
WEAR RING:...................................................... Ductile Iron
WEAR PLATE:............................................................... Steel
SHAFT:..................................................... Plated 4140 Steel
SHAFT SEAL:.................................... Carbon/Ceramic (Std)
ELASTOMERS:................................................ Buna N (Std)
HYDRAULIC OIL:................ 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW:.................................... Max. 8 GPM (30 LPM)
OPERATING PRESSURE:............ Max. 2500 PSI (170 Bar)
POWER SOURCE:...... Any Open Center Hydraulic System
Specifications are subject to change without notice
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website
: www.hydra-tech.com E-Mail: htpump@hydra-tech.com
Model S3TC Overall Dimensions
8 1/2"
(21 cm)
(37.5 cm)
3" NPT (female)
11 3/4"
8 3/4"
(30 cm)
(22 cm)
14-3/4"
0
100
90
80
706050
40
30
201010
20
30
U.S.G.P.M.
Liters/Minute
Feet
Meters
300
A
B
C
D
CAPACITY
TOTAL HEAD
HYDRAULIC INPUT:
(
A) 3 GPM @ 400-500 PSI
(B) 5 GPM @ 700-1050PSI
(C) 6.5 - 7 GPM @ 1500-2100PSI*
(D) 8 GPM @ 1850-2500 PSI**
*Typical perf. with HT13 power unit
**Maximum performance
50
100
150
200
250
300
350
400
450
500
600
900
1200
1500
1800
S3TC Typical Performance
Curves are based on pumping water at 60°F. For performance curves other than shown above, consult factory.
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website
: www.hydra-tech.com E-Mail: htpump@hydra-tech.com
Loading...