Hydra-Tech S3SHR User Manual
3” HYDRAULIC SUBMERSIBLE
SHREDDER PUMP
MODEL S3SHR
3” (75 mm) Discharge
The S3SHR is designed to
continuously rip and shear solids with
a 360° shredding action. The smaller
size allows for use in tight spaces.
For municipal , industrial, agricultural
and institutional waste applications.
A guide rail assembly is available for
stationary applications.
FEATURES
Open-Vane Shredder Impeller with
•
Tungsten Carbide Cutting Tip
Hardened Macerator Suction Plate
•
Oil Lubricated Seals (can run dry)
•
Variable Speed hydraulic drive
•
Versions for Portable or Fixed Installations
•
Safe Hydraulic Drive can be used where
•
electric power is hazardous or impractical
Dependable gear type hydraulic motor
•
Operates with our HT10 to HT20 power
•
units or other hydraulic power sources
capable of flows of 6 - 10 GPM
C0413
SPECIFICATIONS
WEIGHT:........................................................ 73 Lbs. (33 kg)
HEIGHT:........................................................... 18.5" (47 cm)
WIDTH (w/Discharge elbow):........................ 15 1/4" (39 cm)
(Across Volute).................................. 9 1/2" (24 cm)
DISCHARGE:........................................................ 3" NPT(F)
SOLIDS HANDLING:........................................... 3" (75 mm)
HOSE PORTS:............................................ 5/8 (-10) SAE(F)
PUMP BODY:...................................................... Ductile Iron
IMPELLER:.......................................................... Ductile Iron
SHREDDER BLADE:................................ Tungsten Carbide
SHAFT:.......................................................... Stainless Steel
SHAFT SEAL:................................ (Upper) Carbon/Ceramic
(Lower) Silicon Carbide
ELASTOMERS:......................................................... Buna N
HYDRAULIC OIL:................. 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW:.................................. Max. 10 GPM (38 LPM)
OPERATING PRESSURE:............ Max. 2600 PSI (177 Bar)
POWER SOURCE:....... Any Open Center Hydraulic System
Specifications are subject to change without notice
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website: www.hydra-tech.com E-Mail: htpump@hydra-tech.com
Model S3SHR Overall Dimensions
S3SHR Typical Performance
1/8"
17 1/4" [439.6]
18 1/2" [467.5]
10 1/4" [261.5]
15 1/4" [388.5]
3" NPT (F)
9 1/2" [242.2]
0
80
70
60
50
40
30
20
10
10
20
U.S.G.P.M.
Liters/Minute
Fee
t
Met
ers
300
CAPACITY
TOTAL
HEAD
15
25
5
50 100 150 200 250 300 350 400 450 500
600 900 1200 1500 1800
A
B
C
D
E
90
100
30
110
120
130
35
40
HYDRAULIC INPUT:
A) 6 GPM @ 1000 - 1300 PSI
B) 7 GPM @ 1200 - 1500 PSI
C) 8 GPM @ 1450 - 1850 PSI
D) 9 GPM @ 1650 - 2150 PSI
E) 10 GPM @ 1950 - 2400 PSI
Curves are based on pumping water at 60°F. For performance curves other than shown above, consult factory.
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website: www.hydra-tech.com E-Mail: htpump@hydra-tech.com
Loading...