Hydra-Tech S3CML User Manual
3” HYDRAULIC SUBMERSIBLE
HIGH PERFORMANCE PUMP
MODEL S3CML
3” x 2” (75 mm x 50 mm)
The S3CML is highly efficient water pump
for use where small size, light weight, yet
high performance pumping is required.
Applications include portable firefighting,
mine and deepwell de-watering, barge and
ship tank stripping, irrigation, piling and
dock jetting, and many other high head
applications.
FEATURES
Compact, Powerful pump for High-Head
•
applications
Will pass through a 12 in. diameter deck
•
opening or deepwell casing
Oil Lubricated Seals (can run dry)
•
Variable Speed hydraulic drive
•
Wide Range of performance
•
Can be bolted directly into a pipeline
•
Safe Hydraulic Drive can be used where
•
electric power is hazardous or impractical
High Efficiency piston hydraulic motor
•
Operates with our HT15 to HT35 power
•
units or other hydraulic power sources with
flows to 10 -16 GPM
C0109
SPECIFICATIONS
WEIGHT:............................................. 45 lbs. (21 kg)
HEIGHT:............................................. 16 5/8" (42 cm)
WIDTH(@ widest point):..................... 11 3/4" (30 cm)
DISCHARGE:............................................. 2" NPT(F)
INLET FLANGE:.................................... 3" 125# ASA
HOSE PORTS:................... 3/4" SAE (-12) or NPT(F)
PUMP BODY:....................... Heat Treated Aluminum
IMPELLER:..................................................... Bronze
WEAR RINGS:................................................ Bronze
SHAFT:............................................... Stainless Steel
SHAFT SEAL:........................ Carbon / Ceramic (Std)
ELASTOMERS:..................................... Buna N (Std)
HYDRAULIC OIL:............SAE 10W or 20W Type AW
also:......Dexron ATF or Biodegradable Oil
INPUT FLOW:...................... Max. 16 GPM (60 LPM)
OPERATING PRESSURE:....Max 3500 PSI (238 Bar)
POWER SOURCE:
Specifications are subject to change without notice
Any Open Center Hydraulic System
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website
: www.hydra-tech.com E-Mail: htpump@hydra-tech.com
Model S3CML Overall Dimensions
11 3/4"
(30 cm)
16 5/8"
(42 cm)
10 1/4"
(26 cm)
Hydraulic Ports
2" NPT(F) Discharge
0
440
400
360
320
280
240
200
160
120
80
40
40
80
120
U.S.G.P.M.
Liters/Minute
Feet
Meters
300
CAPACITY
TOTAL HEAD
60
100
20
50
100
150
200
250
300
350
400
450
500
600
900
1200
1500
1800
HYDRAULIC INPUT:
A) 6 GPM @ 550 - 800 PSI
B) 10 GPM @ 1300 - 1900 PSI
C) *12 GPM @ 1750 - 2750 PSI
D) **12.8 - 16 GPM @ 2950 PSI
*Typical Performance with HT25 Power Unit
** Typical Performance with HT35 Power Unit
(Maximum Performance)
D
A
B
C
134
S3CML Typical Performance
Curves are based on pumping water at 60°F. For performance curves other than shown above, consult factory.
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website
: www.hydra-tech.com E-Mail: htpump@hydra-tech.com
Loading...