Hydra-Tech S2C User Manual
2” ‘Mini-Sub’
HYDRAULIC SUBMERSIBLE
UTILITY PUMP
MODEL S2C
2” (50 mm) Discharge
The S2C Mini-Sub is our most versatile, all
purpose, utility pump. As part of the Mini-Sub
System that includes our HT3G ‘Ultra-Lite’
Power Unit, this pump offers the best
combination of light weight and portability of
any self-contained submersible pump system
on the market today.
FEATURES
Lightweight (Only 12 lbs.) for Easy
•
Handling
Rugged and Reliable gear motor
•
Variable Speed hydraulic drive
•
Small Size allows this pump to fit into
•
10” openings
Internal By-pass Valve assures Correct
•
Rotation
Safe Hydraulic Drive can be used where
•
electric power is hazardous or impractical
Operates with our HT3G ‘Ultra-Lite’ power
•
unit or other hydraulic power sources
capable of flows to 1.5 GPM
B0109
SPECIFICATIONS
WEIGHT:.............................................. 12 lbs. (5.4 kg)
HEIGHT:................................................ 9 3/4" (25 cm)
WIDTH (@ widest point):...................... 9 3/8" (24 cm)
DISCHARGE:............................................... 2" NPT(F)
SOLIDS HANDLING:................................. 1/4" (6 mm)
HOSE PORTS:........................................ 3/8" (-6) SAE
PUMP BODY:.................................... 365T6 Aluminum
IMPELLER:................................................ Ductile Iron
WEAR PLATE:................................................... Delrin
SHAFT:.................................. Heat Treated Alloy Steel
ELASTOMERS:....................................... Buna N (Std)
HYDRAULIC OIL:....... 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW:........................ Max. 1.5 GPM (6 LPM)
OPERATING PRESSURE:
Int. Max: 2500 PSI (172 Bar)
POWER SOURCE:... Any Open Center Hydraulic System
Specifications are subject to change without notice
Cont.Max: 2000 PSI (136 Bar)
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website
: www.hydra-tech.com E-Mail: htpump@hydra-tech.com
Model S2C Overall Dimensions
9 3/8" (24 cm)
9 3/4" (25 cm)
6 3/4" (17 cm)
2" NPT (Female) Discharge
3/8" SAE or JIC Motor Ports
0
55
50
45
40
35
30
25
20
15
10
5
5
10
15
U.S.G.P.M.
Liters/Minute
Feet
Meters
CAPACITY
TOTAL HEAD
100
90
80
70 6050
40
30
20
10
67
200
133
266
333
360
60
65
20
Hydraulic Input:
1.2 GPM @ 2000-2200 PSI
(5 LPM @ 136-150 BAR)
S2C Typical Performance
Curves are based on pumping water at 60°F. For performance curves other than shown above, consult factory.
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website
: www.hydra-tech.com E-Mail: htpump@hydra-tech.com
Loading...