Hydra-Tech PUMP CONTROLLER User Manual

‘Hydra-Tect’ Pump Controller

Flow Control Manifold with built-in
Circuit Protection

Model FCM-8 shown with optional pressure
gauge and quick-disconnect hydraulic couplings

This controller is designed to allow submersible pumps or hydraulic tools to be connected
to hydraulic power sources such as tractors, utility trucks or other machines that have
hydraulic power available. It provides protection from reverse flow, overspeed and sudden
stops while providing adjustable flow control to fine tune the hydraulic flow.

Available in two flow ranges, 0-8 GPM and 0-16 GPM

•

Built-in check valve prevents running in reverse

•

Anti-cavitation check valve allows impeller to wind down

•

(No sudden stops)

Pressure compensated flow restrictor limits maximum flow to

•

8 GPM or 16 GPM.

Adjustable flow control valve for fine tuning output flow

•

Built-in pressure gauge port

•

Fixed Flow models available

•

A0313

167 Stock Street, Nesquehoning, PA 18240 Phone: [phone] Fax: [phone]
Website: www.hydra-tech.com E-Mail: [e-mail]

Connection Diagrams

PR IN TAN K

PR OUT

MPR OUT

RETURN

PR IN

TANK

PR OUT

MPR
OUT

RETURN

Connecting to Circuit With

Open Center Directional Valve

Model

Flow Range

Ports

Weight

FCM-8

0-8 GPM (0-30 LPM)

1/2” (SAE -8), Gauge 1/4” NPT

Lbs. 6 (Kg 2.7)

FCM-16

0-16 GPM (0-60 LPM)

3/4” (SAE -12), Gauge 1/4” NPT

Lbs. 10 (Kg 4.5)

PR IN

TANK

PR OUT

MPR
OUT

RETURN

Connecting to Circuit With

Closed Center Directional Valve

PR INTAN K

PR OUT

MPR
OUT

RETURN

Hydraulic Power Source

Basic Connections

Flow Control Valve

Pressure Gauge

Connections to Pump or Tool

Flow Control Manifold Hydraulic Schematic

Models

Options:

Liquid Filled Pressure Gauge 0-3000 PSI (0-200 Bar)

•

Quick-disconnect Couplings, Port Adapters and Pigtail Hoses

•

Fixed Flow models available

•

167 Stock Street, Nesquehoning, PA 18240 Phone: [phone] Fax: [phone]
Website: www.hydra-tech.com E-Mail: [e-mail]