MODEL HT25DD
PORTABLE HYDRAULIC POWER UNIT
This power unit is driven by a
Deutz air-cooled diesel engine and
is designed to drive several of our
pump models including the S4T,
S4CSL and S8M. A large, built-in
fuel tank allows this unit to run up
to 24 hours between refills. Other
equipment that require flows to 15
GPM may also operate from this
power unit.
Highway Trailer Chassis with Built-In
•
Fuel Tank and Independent Suspension
Single Point Lifting Bracket
•
Automatic Engine Safety Shutdown
•
Package
Vane-Type Hydraulic Pump
•
Spin-On Return Filter W/ Indicator
•
Variable Speed Control
•
Tank Top Filler/ Strainer
•
B0109
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website: www.hydra-tech.com E-Mail: htpump@hydra-tech.com
FEATURES
•
•
•
•
•
•
•
System Relief Valve
Pressure Control Valve
Liquid Filled Pressure Gauge
Fluid Level/ Temperature Gauge
OPTIONS
Skid Frame
Multiple Hydraulic Circuits
Other Flow and Pressure
Combinations
Model HT25DD Overall Dimensions
SPECIFICATIONS
ENGINE:................................ Deutz D2011L02 Air Cooled Diesel (Tier 3)
HORSEPOWER:........................................................... 25 @ 2300 RPM
HYDRAULIC OUTPUT*:...................... Variable, Max. 15 GPM (57 LPM)
OPERATING PRESSURE*:....................... Maximum 2500 PSI (170 Bar)
HOSE PORT SIZE:..................................................................... 3/4" NPT
HYDRAULIC OIL:.......................................... SAE 10W or 20W Type AW
................................................. also: Biodegradable oil (Consult Factory)
OIL FILTRATION:.....................................................10 Micron (Standard)
OIL RESERVOIR CAPACITY:....................... 30 U.S. Gallons (114 Liters)
FUEL TANK CAPACITY:............................... 37 U.S. Gallons (140 Liters)
FUEL CONSUMPTION:................ Approx. 1.2 U.S. Gal/Hr (4.5 Liters/Hr)
DIMENSIONS:........... H 60" (152 cm) x W 60" (152 cm) x L 98" (249 cm)
WEIGHT (Dry):............................................................. 1380 lbs. (625 kg)
* For Flows and Pressures Other Than Standard, Consult Factory
Since we are constantly working to improve our products, specifications are subject to change without notice.
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website: www.hydra-tech.com E-Mail: htpump@hydra-tech.com