Page 1
FMM-P-S
FMM-P-M
FluidMonitoring Module
Installation and Maintenance Instructions
English (translation of original instructions)
Documentation no.: 3866049a
(Valid from series no.: 0002S01827N0000401)
Page 2
Imprint
Publisher and responsible for the content:
HYDAC FILTER SYSTEMS GMBH
Postfach 1251
66273 Sulzbach / Saarland
Germany
Telephone: +49 (0)6897 509 01
Telefax: +49 (0)6897 509 846
E-mail: filtersystems@hydac.com
Homepage: www.hydac.com
Court of Registration: Saarbrücken, HRB 17216
Imprint
Executive director: Mathias Dieter,
Dipl.Kfm. Wolfgang Haering
Documentation Representative
Mr. Günter Harge
c/o HYDAC International GmbH, Industriegebiet, 66280 Sulzbach / Saar
Telephone: ++49 (0)6897 509 1511
Telefax: ++49 (0)6897 509 1394
E-mail: guenter.harge@hydac.com
© HYDAC FILTER SYSTEMS GMBH
All rights reserved. No part of this work may be reproduced in any form (print,
photocopy or by other means) or processed, duplicated or distributed using
electronic systems without the written consent of the publisher.
These documents have been created and inspected with the greatest care.
However, errors cannot be ruled out completely.
All details are subject to technical modifications. The content of this manual is
subject to change without notice.
FMM-P-S / FMM-P-M
MoWa FMM-P-x 3866049a en(us) 2013-09-17 2013-09-17
en(us)
Page 2 / 40
Page 3
Content
Imprint............................................................................................................2
Documentation Representative ...................................................................2
Preface...........................................................................................................5
Customer service.........................................................................................6
Modifications to the Product ........................................................................6
Documentation Representative
Warranty
......................................................................................................6
Using the documentation .............................................................................7
Safety Information and Instructions............................................................8
Hazard symbols...........................................................................................8
Signal words and their meaning in the safety information and
instructions ..................................................................................................9
Structure of the safety information and instructions...................................10
Observe regulatory information .................................................................10
Proper/Designated Use .............................................................................11
FMM-P-x-0-CS1xx0................................................................................11
FMM-P-x-1-CS1xx1................................................................................11
Improper Use or Use Deviating from Intended Use ...................................12
Qualifications of personnel / target group ..................................................13
Unpacking the FMM ....................................................................................14
Storing the FMM..........................................................................................14
Decoding the model code label .................................................................15
Checking the scope of delivery .................................................................16
FMM Features..............................................................................................17
Components ..............................................................................................18
FMM-P-S-… ..............................................................................................18
FMM-P-M-…..............................................................................................19
Dimensions..................................................................................................20
FMM-P-S-… ..............................................................................................20
FMM-P-M with AS1000..............................................................................21
FMM-P-M with AS3000..............................................................................22
FMM-P-M
Hy
draulic diagram.......................................................................................24
FMM-P-S / FMM-P-M
MoWa FMM-P-x 3866049a en(us) 2013-09-17 2013-09-17
with HydacLab ..........................................................................23
en(us)
Page 3 / 40
Page 4
Documentation Representative
FMM-P-S-… ..............................................................................................24
FMM-P-M-…..............................................................................................24
Installing the FMM.......................................................................................25
Attaching the FMM-P-S .............................................................................26
Attaching the FMM-P-M.............................................................................27
Hydraulic connection of the FMM..............................................................28
Connecting FMM with the hydraulic system ...........................................29
Error messages / Troubleshooting............................................................30
Performing Maintenance ............................................................................31
Changing the Filter Element ......................................................................31
Decommissioning the FMM........................................................................32
Disposing of the FMM.................................................................................32
Contact/Service...........................................................................................33
Ersatzteile / Zubehör...................................................................................34
Spare Parts................................................................................................34
Accessories ...............................................................................................35
Technical data .............................................................................................36
Model Code..................................................................................................37
Index ............................................................................................................38
FMM-P-S / FMM-P-M
MoWa FMM-P-x 3866049a en(us) 2013-09-17 2013-09-17
en(us)
Page 4 / 40
Page 5
Preface
For you, as the owner of a product manufactured by us, we have produced
this manual, comprising the most important instructions for its operation and
maintenance.
It is intended to help you become acquainted with the ins and outs of the
product and use it properly.
You should keep it in the vicinity of the product so it is always at your
fingertips.
Note that the information on the unit's engineering contained in the
documentation was that available at the time of publication.Consequently,
there might be deviations in technical details, figures and dimensions.
Documentation Representative
If you discover errors while reading the documentation or have suggestions
or other useful information, please don’t hesitate to contact us:
HYDAC FILTER SYSTEMS GMBH
Technische Dokumentation
Postfach 12 51
66273 Sulzbach / Saar
Germany
We look forward to receiving your input.
“Putting experience into practice”
FMM-P-S / FMM-P-M
MoWa FMM-P-x 3866049a en(us) 2013-09-17 2013-09-17
en(us)
Page 5 / 40
Page 6
Customer service
If you have any questions, suggestions, or encounter any problems of a
technical nature, please don't hesitate to contact us. When contacting us,
always include the model/type designation, serial no. and part-no. of the
product:
Telefax: ++49 (0) 6897 / 509 - 846
E-mail: filtersystems@hydac.com
Modifications to the Product
We would like to point out that changes to the product (e.g. purchasing
additional options, etc.) may mean that the information in the operating
instructions is no longer applicable or adequate.
After modification or repair work that affects the safety of the product has
been carried out on components, the product may not be returned to
operation until it has been checked and released by a HYDAC technician.
Documentation Representative
Please notify us immediately of any modifications made to the product
whether by you or a third party.
Warranty
For the warranty provided by us, please refer to the General Terms of Sale
and Delivery of HYDAC FILTER SYSTEMS GMBH.
You will find this at www.hydac.com -> Legal information.
FMM-P-S / FMM-P-M
MoWa FMM-P-x 3866049a en(us) 2013-09-17 2013-09-17
en(us)
Page 6 / 40
Loading...