Page 1
Not
for
Reproduction
Illustrated Parts List
Pressure Washer / Lavadora de Presión
Pressure Washer
This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA)
Standard PW101 (Testing and Rating Performance of Pressure Washers).
Questions? Help is just a moment away!
Preguntas? La ayuda es justa un momento lejos!
Call: Pressure Washer Helpline
Llame: Línea Directa del Lavadora a Presión - 1-877-224-0458 M-F 8-5 CT
Model / Modelo
Mfg. No. Description / Descripción
020524-00 3,300 PSI Husqvarna
Manual Part No. 317992
Revision
Rev. Date:
A
5/3/2012
Page 2
Not
for
Reproduction
Table Of Content s
Main Unit ..............................................................................................................................................................
Pump ....................................................................................................................................................................
Torque Specication Chart ............................... ...................................... Inside Back Cover
SEGAPSTNENOPMOC TCUDORP
4
7
Page 3
Not
for
Reproduction
Main Unit
NOTE: Unless noted otherwise,
use the standard hardware torque
specication chart.
316335
PART NO. DESCRIPTIONREF.
BASE 1 313250GS
HANDLE 2 313252GS
GRIP, Handle 3 316502GS
GRIP, Handle 4 316501GS
SCREW, M5-0.8 x 20 5 -----
CAP, Plug 6 316712GS
SCREW, M6 x 18 7 -----
MOUNT, Vibration 8 316713GS
NUT, M6 1.0 9 -----
T-KNOB 10 316732GS
SCREW 11 316508GS
WASHER, Flat M8 12 -----
VALVE, Chemical Tank 13 317106GS
NUT, M8 FLANGE 14 -----
DECAL 15 316726GS
SCREW, M6 x 10 16 -----
CAP, Chemical Tank 17 316764GS
Footnotes
* ( Engine parts are available through your Enine Manufacturer)
The above parts group applies to the following Mfg. Nos.:
020524-00 - 3,300 PSI Hus qvarna
PART NO. DESCRIPTIONREF.
WIREFORM 18 316500GS
KNOB 19 194289GS
TANK, Chemical 20 315530GS
DECAL 21 316723GS
CAP, Fuel 22 316670GS
DECAL 23 316778GS
SCREW, M6 x 25 HEX 24 -----
WASHER 25 312005GS
VALVE, Fuel 26 209417GS
GROMMET 27 30809GS
TANK, Fuel 28 315531GS
BARB, Hose 29 317025GS
WRAP, Hose 30 316374GS
SCREW, M6-1.0 x 16 31 -----
HOSE, Vapor (cut to t) 32 315017GS
CLAMP 33 48031JGS
Briggs & Stratton Power Products Group, LLC
Copyright © by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
2012
4
317992
Page 4
Not
for
Reproduction
Main Unit
NOTE: Unless noted otherwise,
use the standard hardware torque
specication chart.
316335
PART NO. DESCRIPTIONREF.
KIT, Fuel Hose (cut to t) 34 791745
DECAL 35 197798GS
PIN, Hair 36 5025210YP
WASHER, Flat 5/8" 37 -----
WHEEL 38 316406GS
AXLE 39 317577GS
WHEEL, Caster 40 316405GS
HEATSHIELD 41 316504GS
HEATSHIELD 42 316505GS
SCREW, M8 - 1.25 x 20 43 -----
FITTING 44 95458GS
MOUNT, Vibration 45 21217GS
MUFFLER 46 188301GS
BRACKET, Muer 47 191785GS
SCREW, M6 1.0 x 12 48 -----
GASKET 49 697815
PUMP 50 317944GS
Footnotes
* ( Engine parts are available through your Enine Manufacturer)
The above parts group applies to the following Mfg. Nos.:
020524-00 - 3,300 PSI Hus qvarna
PART NO. DESCRIPTIONREF.
TRAY-BATTERY 51 316511GS
CLAMP 52 48031GGS
HOSE-CHEMICAL 53 A1040DGS
SCREW, 5/16-24 x 1 54 -----
WASHER 55 92479GS
KEY 56 23139DGS
DECAL 57 208538GS
DECAL 58 316727GS
FILTER, Garden Hose 59 B2384GS
CARBON CANISTER 60 316783GS
CLIP 61 316503GS
KIT, Nozzle 62 208324GS
NOZZLE, QC Black -- 198841GS
NOZZLE, QC Red -- 195983NGS
NOZZLE, QC Green -- 195983QGS
NOZZLE, QC Yellow -- 195983PGS
NOZZLE, QC White -- 195983RGS
Briggs & Stratton Power Products Group, LLC
Copyright © by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
2012
5
317992
Page 5
Not
for
Reproduction
Main Unit
NOTE: Unless noted otherwise,
use the standard hardware torque
specication chart.
316335
PART NO. DESCRIPTIONREF.
OIL BOTTLE 63 316768GS
GUN 64 316157GS
HOSE 65 316467GS
MANUAL-OPERATOR 66 316333GS
EXTENSION 67 207785GS
WASHER, FLAT 5/16 68 -----
FITTING 69 195894GS
CONNECTOR 70 195893GS
VALVE, Thermal Reief 71 208673GS
SWITCH 72 7028765YP
BOOT, Rubber 73 312687GS
JACK, Coaxial 74 208511GS
BATTERY 75 316543GS
COVER, Battery 76 316729GS
CHARGER, Battery 77 B4177GS
CABLE ASSEMBLY 78 690795
BRACKET SOLENOID ASSEMBLY 79 557067
Footnotes
* ( Engine parts are available through your Enine Manufacturer)
The above parts group applies to the following Mfg. Nos.:
020524-00 - 3,300 PSI Hus qvarna
PART NO. DESCRIPTIONREF.
ENGINE 900 -----
WRENCH, Allen (Parts Not Illustrated) -- 316782GS
CABLE, Battery, Red (Parts Not Illustrated) -- 317898GS
CABLE, Battery, Black (Parts Not Illustrated) -- 317943GS
KEY (Parts Not Illustrated) -- 601 40 00 76
OIL FUNNEL (Parts Not Illustrated) -- 317365GS
KIT, Battery Hardware (Parts Not Illustrated) -- 315546GS
PUMP SAVER (Optional Accessories) -- 6039
Briggs & Stratton Power Products Group, LLC
Copyright © by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
2012
6
317992
Page 6
Not
for
Reproduction
Pump
NOTE: Unless noted otherwise,
use the standard hardware torque
specication chart.
316158
PART NO. DESCRIPTIONREF.
INJECTOR, Detergent 20 198851GS
JET 25 204860GS
O-RING 26 204859GS
CAP, Check Valve 34 198850GS
DIPSTICK 50 198849GS
SCREW 66 198297GS
PLUG, Drain 83 203034GS
KIT, Unloader A 198736GS
KIT, Check Valve B 198843GS
KIT, Piston C 198844GS
KIT, Chemical Injector D 192914GS
KIT, Water Seal E 198845GS
KIT, Support Ring F 198848GS
KIT, Hardware G 198852GS
KIT, Oil Seals H 198846GS
KIT, O- Ring J 198847GS
KIT, Unloader Seat K 202902GS
Footnotes
The above parts group applies to the following Mfg. Nos.:
020524-00 - 3,300 PSI Hus qvarna
PART NO. DESCRIPTIONREF.
KIT, Unloader L 202800GS
FILTER, Garden Hose (Parts Not Illustrated) -- B2384GS
PUMP SAVER (Optional Accessories) -- 6039
Briggs & Stratton Power Products Group, LLC
Copyright © by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
2012
7
317992
Page 7
Not
for
Reproduction
Hardware Identication & Torque Specications
No
Marks
0
1/4 3/4
1/2
21
1/4 3/4
1/2
1/4 3/4
1/2
1/4 3/4
1/2
4
Torque Specication Chart
FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%)
Property
Class
Size Of
Hardware
M3
M4
M5
M6 7.3 10.3 12.1
M7 12.1 16.9 19.9
M8 17.7
M10 35 50
M12 61 86.2 103 140
M14
M16 147 210 250 340
M18 202 287 346 470
M20 290 405 486 660
M22 390 559 656 890
M24 497
M27 733 1032 1239 1680
M30 995 1401 1681 2280
M33
M36 1740 2441
M39 2249 3163
The guides and ruler furnished below are designed to
help you select the appropriate hardware.
0 10
Nut, M8
Thread
Diameter (mm)
Inside
Diameter (in)
Nut, 1/2-16
Class 5.6
in/lbs
ft/lbs
5.88
13.44
26.4
44.64
5.2
7.7
15
26
42
64
89
126
169
217
320
435
590
759
988
20
5.6
Nm. Nm. Nm.
.56
1.28
2.50
4.3
7.1
10.5
21
36
58
88
121
171
230
295
435
590
800
1030
1340
30
8.8
Class 8.8
in/lbs
ft/lbs
13.44 1.80
30.72 43.44 52.56
60.96
Class 10.9
in/lbs
ft/lbs
19.2 22.92
1.28
2.90
5.97 7.15
5.75
9.9
16.5
25
24
48
83
101
136 162 220
132
200
275
390
530
708
375
995
1350
1349
1902 2278 3090
1830
2360
3050
40
60
50
Body Length
Screw, M8- 1.25 x 25
Thread
Diameter (mm)
Threads
per inch
Body
Diameter
Screw, 1/2- 16 x 2
10.9
in/lbs
ft/lbs
4.10
8.10
14
23
34
67
117
185
285
390
550
745
960
1400
1900
2580
3310
4290
Distance between
threads (mm)
Threads
per inch
2935 3980
3798
80
Body
Diameter
3
12.9
Class 12.9
29
59
840 1140
Nm.
2.15
4.95
9.7
16.5
27
40
81
5150
90 10070
Body
Length (mm)
Body
Length (in)
Torque Specication Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware
Grade
Size Of
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 29 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0 420 571.2
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
b. for ange whizlock nuts and screws - use 135% of
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specication.
Common Hardware Types
Hex Head Capscrew
SAE Grade 2 SAE Grade 5 SAE Grade 8
in/lbs in/lbs
2.1
19
20
2.3
3.1
27
3.5
31
7.6 8 10.9 12 16.3
66
76
8.6 10 13.6 14 19.0
torques.
grade 5 torques.
30
31
43
49
NOTES
in/lbs
3.4
3.5
4.9
5.5
41
43
60
68
Washer
4.6
4.9
6.8
7.7
Standard Hardware Sizing
When a washer or nut is identied as 1/2” (M8), this is
the
Nominal size
(8mm metric thread diameter); if a second number is present
it represents the
When bolt or capscrew is identied as 1/2 - 16 x 2” (M8 - 1.25 x 50 ),
this means the
metric thread diameter), the second number,16, represents the
, meaning the
threads per inch
Nominal size
inside diameter
(distance between threads).
, or body diameter is 1/2 inch (8mm
threads per inch, (1.25 thread diameter).
body length of the bolt or screw, 2 inches (50mm).
is 1/2 inch
The nal number is the
Lockwasher
Carriage Bolt
Hex Nut
Wrench & Fastener Size Guide
1/4” Bolt or Nut
Wrench—7/16”
M6 Bolt or Nut
Wrench—10mm
5/16” Bolt or Nut
Wrench—1/2”
M8 Bolt or Nut
Wrench—13mm
3/8” Bolt or Nut
Wrench—9/16”
M10 Bolt or Nut
Wrench—17mm
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
M12 Bolt or Nut
Wrench—19mm
1/2” Bolt or Nut
Wrench—3/4”
M14 Bolt or Nut
Wrench—22 mm
Page 8
Not
for
Reproduction
Briggs & Stratton Power Products Group, LLC
Copyright© Briggs & Stratton Power Products Group, LLC. All rights reserved. No part of this page can be
produced or transmitted in any form by any means without the express written permission of Briggs & Stratton Power
Products Group, LLC.
2012
Loading...