Husky HU80522 User Manual

OPERATOR’S MANUAL
GASOLINE PRESSURE WASHER
Your pressure washer has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
TABLE OF CONTENTS
Introduction ..................................................................................................................................................................... 2
Important Safety Instructions .......................................................................................................................................... 3
Specific Safety Rules ....................................................................................................................................................... 4
 Symbols ........................................................................................................................................................................5-6
���� Features ........................................................................................................................................................................7-8
�� Assembly ....................................................................................................................................................................8-12
Operation ..................................................................................................................................................................13-15
Maintenance ............................................................................................................................................................. 16-18
Troubleshooting ............................................................................................................................................................. 19
Warranty ........................................................................................................................................................................ 21
Parts Ordering / Service ...................................................................................................................................Back Page
INTRODUCTION
This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.
IMPORTANT INFORMATION ON THE ENGINE WARRANTY OF THIS PRODUCT can be obtained by contacting:
Briggs & Stratton Corporation
Milwaukee, Wisconsin 53201
1-800-233-3723
www.briggsandstratton.com
2
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Read and understand all instructions. Failure to follow
all instructions listed below may result in electric shock, fire and/or carbon monoxide poisoning which will cause death or serious personal injury.
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT
Know your tool. Read the operator’s manual carefully.
Learn the machine’s applications and limitations as well as the specific potential hazards related to this tool.
Keep guards in place and in working order. Never
operate the tool with any guard or cover removed. Make sure all guards are operating properly before each use.
Remove adjusting keys and wrenches. Form habit
of checking to see that keys and adjusting wrenches are removed from tool before turning it on.
To reduce the risk of injury, keep children and visitors
away. All visitors should wear safety glasses and be kept a safe distance from work area.
�Keep the area of operation clear of all persons,
particularly small children, and pets.
Do not operate the engine in a confined space where
da ngero us carb on monoxide fume s can collec t. Carbon monoxide, a colorless, odorless, and extremely dangerous gas, can cause unconsciousness or death.
Use right tool. Don’t force tool or attachment to do a
job it was not designed for. Don’t use it for a purpose not intended.
Dress properly. Do not wear loose clothing, gloves,
neckties, or jewelry. They can get caught and draw you into moving parts. Rubber gloves and nonskid footwear are recommended when working outdoors. Also wear protective hair covering to contain long hair.
�Do not operate the equipment while barefoot or when
wearing sandals or similar lightweight footwear. Wear
protective footwear that will protect your feet and improve your footing on slippery surfaces.
Exercise caution to avoid slipping or falling. Always wear safety glasses with side shields.
Everyday eyeglasses have only impact-resistant lenses; they are NOT safety glasses.
Don’t overreach or stand on unstable support. Keep
proper footing and balance at all times.
Use only recommended accessories. The use of
improper accessories may cause risk of injury.
Never stand or sit on tool. Serious injury could occur
if the tool is tipped.
Follow the maintenance instructions specified in
this manual.
Check damaged parts. Before further use of the
tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged must be properly repaired or replaced by an authorized service center to avoid risk of personal injury.
Never leave tool running unattended. Turn power off.
Don’t leave tool until it comes to a complete stop.
�Keep the engine free of grass, leaves, or grease to
reduce the chance of a fire hazard.
Keep the exhaust pipe free of foreign objects.
�Follow manufacturer’s recommendations for safe
lo ading, unloadi ng, tr anspo rt, and st orage of machine.
Be thoroughly familiar with controls. Know how to
stop the product and bleed pressure quickly.
Keep tool dry, clean, and free from oil and grease.
Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any solvents to clean tool.
Stay alert and exercise control. Watch what you are
doing and use common sense. Do not operate tool when you are tired. Do not rush.
�Do not operate the product while under the influence
of drugs, alcohol, or any medication.
Check the work area before each use. Remove all
objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the machine.
Do not use tool if switch does not turn it on and
off. Have defective switches replaced by an authorized
service center.
�Before cleaning, repairing, or inspecting, shut off the
engine and make certain all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting.
Avoid dangerous environment. Don’t use in damp or
wet locations or expose to rain. Keep work area well lit.
Never use in an explosive atmosphere. Normal
sparking of the motor could ignite fumes.
Do not operate while smoking or near an open flame.
Do not operate around dry brush, twigs, cloth rags,
or other flammable materials.
WARNING: Risk of injection or injury – Do not direct
discharge stream at persons.
3
SPECIFIC SAFETY RULES
Never direct a water stream toward people or pets,
or any electrical device.
�Before starting any cleaning operation, close doors
and windows. Clear the area to be cleaned of debris, toys, outdoor furniture, or other objects that could create a hazard.
�Never pick up or carry a machine while the engine is
running.
Never start the machine if ice has formed in any part
of the equipment.
Do not use acids, alkalines, solvents, flammable
material, bleaches, or industrial grade solutions
in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.
Always operate the machine on a level surface. If the
engine is on an incline, it could seize due to improper lubrication (even at the maximum oil level).
WARNING: High pressure jets can be dangerous if
subject to misuse. The jet must not be directed at
persons, animals, electrical devices, or the machine itself.
Never attempt to make any adjustments while the
engine (motor) is running (except where specifically
recommended by the manufacturer).
Protective covers must always cover rotating parts
when the engine is running.
Keep cooling air intake (recoil starter area) and muffler
side of the engine at least 3 feet away from buildings, obstructions, and other burnable objects.
Keep the engine away from flammables and other
hazardous materials.
Keep away from hot parts. The muffler and other engine
parts become very hot; use caution.
Do not touch the spark plug and ignition cable when
starting and operating the engine.
Check fuel hoses and joints for looseness and fuel
leakage before each use.
Check bolts and nuts for looseness before each
use. A loose bolt or nut may cause serious engine problems.
Always refuel outdoors. Never refuel indoors or in a
poorly ventilated area.
Never store the machine with fuel in the fuel tank
inside a building where ignition sources are present,
such as hot water and space heaters, clothes dryers, and the like.
If the fuel tank has to be drained, do this outdoors.
To reduce the risk of fire and burn injury, handle fuel
with care. It is highly flammable.
Do not smoke while handling fuel.
Add fuel before starting the engine. Never remove the
cap of the fuel tank or add fuel while the engine is running or when the engine is hot.
Loosen fuel cap slowly to release pressure and to keep
fuel from escaping around the cap.
Replace all fuel tank and container caps securely.
Wipe spilled fuel from the unit. Move 30 feet away from
refueling site before starting engine.
If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and avoid creating any source of ignition until fuel vapors have dissipated.
Never attempt to burn off spilled fuel under any
circumstances.
Before storing, allow the engine to cool.
Store fuel in a cool, well-ventilated area, safely away
from spark and/or flame-producing equipment.
Store fuel in containers specifically designed for this
purpose.
Empty fuel tank and restrain the unit from moving
before transporting in a vehicle.
When servicing use only identical replacement parts.
Use of any other parts may create a hazard or cause product damage.
ONLY use cold water.
Make sure minimum clearance of 3 feet is maintained
from combustible materials.
Save these instructions. Refer to them frequently and
use them to instruct other users. If you loan someone this tool, loan them these instructions also.
4
SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta­tion of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
Wet Conditions Alert
Read The Operator’s Manual
Eye Protection
Safety Alert
Hot Surface
Risk of Injections
Risk of Explosion
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand operator’s manual before using this product.
Always wear safety goggles or safety glasses with side shields and, as necessary, a full face shield when operating this product.
Precautions that involve your safety.
To reduce the risk of injury or damage, avoid contact with any hot surface.
To reduce the risk of injection or injury, never direct a water stream towards people or pets or place any body part in the stream. Leaking hoses and fittings are also capable of causing injection injury. Do not hold hoses or fittings.
Fuel and its vapors are explosive and can cause severe burns or death.
Risk of Fire
Toxic Fumes
Kickback
Electric Shock
Chemical Burns
Fuel and its vapors are extremely flammable and explosive. Fire can cause severe burns or death.
Gas products emit carbon monoxide, an odorless, colorless, poison gas. Breathing carbon monoxide can cause nausea, fainting, or death.
To reduce the risk of injury from kickback, hold the spray wand securely with both hands when the machine is on.
Failure to use in dry conditions and to observe safe practices can result in electric shock.
To reduce the risk of injury or damage, DO NOT USE ACIDS, ALKALINES, BLEACHES, SOLVENTS, FLAMMABLE MATERIAL, OR INDUSTRIAL GRADE SOLUTIONS in this product.
5
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER:
WARNING:
CAUTION:
CAUTION:
Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in prop­erty damage.
SERVICE
Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to the nearest AUTHORIZED SERVICE CENTER for repair. When servic­ing, use only identical replacement parts.
WARNING:
To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator’s manual. If you do not under­stand the warnings and instructions in the operator’s manual, do not use this product. Call Husky customer service for assistance.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.
SAVE THESE INSTRUCTIONS
6
FEATURES
PRODUCT SPECIFICATIONS
Engine ........................................................................................................................................... Briggs and Stratton Q45™*
Fuel Tank Capacity ......................................................................................................................................1 quart (.95 liters)
Maximum Pounds Per Square Inch Pressure .......................................................................................................... 2,200 psi
Maximum Gallons Per Minute ...................................................................................................................................2.0 GPM
* No representation is made as to the horsepower of the Briggs & Stratton Q45™ Series engine.
OIL CAP / DIPSTICK
STORAGE
STRAP
HIGH
PRESSURE
HOSE
NOZZLES AND
NOZZLE STORAGE
OFF
SWITCH
FUEL CAP
RECOIL
STARTER
PRIMER
BULB
SPRAY
WAND
TELESCOPING
HANDLE
TRIGGER WITH
LOCK OUT
SPRAY WAND
EXTENSION
INJECTION
HOSE
CARRYING
HANDLE
NOZZLE CLEANING
TOOL
Fig. 1
7
Loading...
+ 15 hidden pages