Hunter Hydrawise HC-1200M Quick Start Manual

HC EXPANSION MODULE

Quick Start Guide

hunterindustries.com

Hydrawise

™

Ready

TABLE OF CONTENTS

HC SUPPORT

Thank you for purchasing the Hunter HC Expansion Module. In this Quick Start
Guide you will learn how to install and congure the HC Expansion Module. For
support for Hydrawise™ cloud soware or help with your Hydrawise account,
please visit hunter.direct/hchelp.

Your expansion module is shipped with –

• A 12 Zone Expansion Module with a blue wiring cover.

• 36in (900mm) Expansion Cable.

• Bag containing 2 x screws and 2 x conical wall anchors for wall mounting.

Installation

3

Hydrawise App Conguration

7

Troubleshooting

8

3

INSTALLATION

Expansion Module Location

The Hydrawise Expansion Module is designed for installation in a protected location.

The chosen location for the expansion module should be within 20in (500mm) of the
main controller.

Cable Entry

The Expansion Module has 2 cable entry options – from the rear of the case or via a conduit
from the bottom of the Expansion Module.

1. Entry from rear of module- Using a sharp knife, remove the 2 cutouts on the rear of the
expansion module as indicated on the diagram as .

2. Entry via ¾ inch conduit- Using a sharp knife, cut around the semi-circular line on the
expansion module as indicated on diagram as . Cut around the matching line on the
blue controller wiring cover.