Hunter 59515 52 User Manual

30 inches

7 feet

Ladder

Table of Contents

www.HunterFan.com

1.888.830.1326

Congratulations on purchasing
your new Hunter® ceiling fan! It will
provide comfort and performance

in your home or ofce for many

years. This installation and operation
manual contains complete
instructions for installing and
operating your fan.

We are proud of our work and
appreciate the opportunity to
supply you with the best ceiling fan
available anywhere in the world.

To register your fan please visit:
www.HunterFan.com/register

What to Expect with

Your Installation

2

6

Maintenance,

Operation & Cleaning

Tools Needed

PAG E

Wiring Canopy BladesDownrod

PAG E

Troubleshooting

?

?

3

9

Mounting Options

PAG E

PAG E

4

10

Ceiling Bracket

PAG E

PAG E

PAG E

5

PAG E

11

PAG E

12

?

13

1

M3502-01 • 04/14/14 • © Hunter Fan Company

PAG E

What to Expect with Your Installation

www.HunterFan.com

1.888.830.1326

1.888.830.13261.888.830.1326

Must be able to
secure the fan to
building structure or
fan-rated outlet box

You may need a
friend to help you.

Check box to see
fan weight

If you are unfamiliar
with wiring, use a

qualied electrician.

Know your wiring

Ceiling angles greater
than 34° will require an
Angled Mounting Kit.
See page 4 for details.

Assess ceiling angle

30 inches

from blade tip
to nearest wall
or obstruction

Assess location

Standard Downrod

1

for ceilings 8-10 feet high

Shorter Downrod

2

for fans installed close to ceiling

Longer Downrod

3

for ceilings 10 feet or higher

Select a downrod length

7 feet

from bottom

edge of blade

to the oor

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

w.1 - To reduce the risk of re, electrical shock, or

personal injury, mount fan directly from building
structure and/or an outlet box marked acceptable for
fan support of 70 lbs (31.8 kg) and use the mounting
screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing
or servicing your fan, disconnect the power by turning
off the circuit breakers to the outlet box and associated
wall switch location. If you cannot lock the circuit
breakers in the off position, securely fasten a prominent
warning device, such as a tag, to the service panel.

w.3 - To reduce the risk of re, electrical shock, or motor
damage, use only Hunter Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the
blade brackets when installing the blade brackets, balancing
the blades, or cleaning the fan. Do not insert foreign objects
in between rotating fan blades.

CAUTIONS

c.1 - All wiring must be in accordance with national and
local electrical codes ANSI/NFPA 70. If you are unfamiliar

with wiring, use a qualied electrician.

c.2 - Use only Hunter replacement parts.

2

M3502-01 • 04/14/14 • © Hunter Fan Company

Tools Needed

www.HunterFan.com

1.888.830.1326

Ladder

Pliers Wire Strippers

Power Drill

(optional)

If mounting to a support structure, you will also need these tools.

9/64” Drill Bit

(optional)

3

M3502-01 • 04/14/14 • © Hunter Fan Company

Screwdrivers

O

34

CEILING

Mounting Options

www.HunterFan.com

1.888.830.1326

1.888.830.1326

OPTION

If you have a at ceiling:

WALL

Hang your fan by a standard downrod (included).

Standard
Mounting

1

Support
Structure

Support
Structure

OPTION

If you have an angled ceiling:

1. You will need a longer downrod (sold separately).

2. If your ceiling angle is greater than 34°, you will
also need an Angled Mounting Kit (sold separately).

Use the three steps below to determine if your ceiling angle is greater than 34°

Angled
Mounting

2

Standard
Mounting
Style

Ceiling

Outlet Box

(required)

Angled
Mounting
Style

Ceiling

Outlet Box

(required)

FOLD

on dotted line

1

N

O

I

T

A

U

T

I

S

1

34°

Guide Touches

BOTH Ceiling & Wall

You need ONLY

a Longer

Downrod

*most common

2 3

PLACE

against wall

2

N

O

I

T

A

U

T

I

S

Guide Touches

but NOT Ceiling

You need BOTH

a Longer

Downrod &

an Angled

Mounting Kit

SLIDE

toward ceiling

Wall

4

4

M3502-01 • 04/14/14 • © Hunter Fan Company

M3502-01 • 04/14/14 • © Hunter Fan Company

Use Standard Mounting

or Low-Prole Mounting

to hang the fan from a at ceiling.

Use Angled Mounting

to hang the fan from a

vaulted or angled ceiling.

Ceiling Bracket

Turn Power

OFF

www.HunterFan.com

For angled ceilings, point

opening toward peak.

1.888.830.1326

Make sure all four (4) bumpers

Refer to warning w.1 on pg. 2

are still attached.

Use wood screws
(included) when securing
to support structure with
approved electrical outlet

box. Drill 9/64” pilot holes
in support structure to aid
in securing ceiling bracket

with hardware found in

the hardware bag.

5

M3502-01 • 04/14/14 • © Hunter Fan Company

Use machine screws

(provided with outlet

box) when securing to

existing ceiling fan-rated

outlet box. Make sure

it is securely installed

and is acceptable for fan

support of 31.8 kg (70 lbs)

or less.

To avoid possible electrical shock, before installing your fan,

disconnect the power by turning off the circuit breakers to

the outlet box associated with the wall switch location.

If you are unable to do this,

call Technical Support at

1-888-830-1326.

Downrod

www.HunterFan.com

1.888.830.1326

Standard
Downrod

for ceilings 8-10’ high

Option 1Option 2

Shorter
Downrod

for fans installed
close to ceiling

Included

(pre-assembled)

Longer
Downrod

for angled
ceilings or

Option 3

ceilings 10’ or
higher

skip to next page

If you need a different downrod length follow these steps:

Steps 1-5 to remove standard downrod pipe

1 2 3 4 5

Slide

Slide

678910

Included

Sold Separately

Steps 6-10 to reassemble with new pipe

6

M3502-01 • 04/14/14 • © Hunter Fan Company

Downrod (continued)

www.HunterFan.com

1.888.830.1326

KEEP!

E

E

P

K

!

Remove the pre-installed

setscrew so that the downrod

can be inserted.

Hand tighten the downrod (at

least 4-5 full turns) until it stops.

8”

M3502-01 • 04/14/14 • © Hunter Fan Company

3/8”

T

U

C

P

I

R

T

S

&

8”

(not to scale)

The wires can be cut, but

leave at least 8” extending

from the top of the downrod.

Tighten the setscrew

with pliers. DO NOT

HAND TIGHTEN.

3/8”

If the setscrew is not tightened
securely, the fan may fall.

7

Downrod (continued)

DO NOT PICK THE FAN UP BY THE

Put the wires and downrod through the

canopy. Let the canopy sit loosely on top

www.HunterFan.com

1.888.830.1326

of the fan.

CANOPY OR WIRES. Place the downrod

ball into the slot in the ceiling bracket.

8

M3502-01 • 04/14/14 • © Hunter Fan Company

Wiring

Note: To connect the wires, hold the bare metal

www.HunterFan.com

1.888.830.1326

leads together and place a wire connector over

E

C

I

L

I

M

N

O

R

F

G

them, then twist clockwise until tight.

E

C

I

L

I

M

N

O

R

F

G

F

A

M

N

O

R

F

Refer to CAUTION c.1 on pg. 2

Green/Yellow
Stripe

F

R

O

M

C

E

(Grounding)

Green/Yellow

Stripe

I

L

I

(Grounded)

White

Using an orange wire

connector from

the hardware bag,

connect the 3 grounding

wires (green, green/

yellow stripe, or bare

copper) coming from the

T

E

K

C

A

R

B

G

N

ceiling, downrod, and

hanging bracket.

F

Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

(Ungrounded)

Black

Blue

Using the orange wire

connectors from

the hardware bag, connect

the black wire (ungrounded)

from the ceiling to the black

and the blue wires from the
fan. Connect the white wire

(grounded) from the ceiling to

the white wire from the fan.

R

N

O

A

F

M

9

M3502-01 • 04/14/14 • © Hunter Fan Company

Canopy

Screw

Holes

www.HunterFan.com

1.888.830.1326

Position the canopy so that, when

lifted into place, the canopy ts into

the hanging bracket as shown.

Lift the canopy into place so that

the screw holes are aligned.

10

M3502-01 • 04/14/14 • © Hunter Fan Company

Insert the two canopy screws

found in the hardware bag.

Note: Fan style may vary.

Blades

www.HunterFan.com

1.888.830.1326

To secure each blade to a blade iron, open the

locking mechanism and align the holes in the

blade with the blade iron post.

M3502-01 • 04/14/14 • © Hunter Fan Company

Close the locking mechanism securely.

You will feel it lock into place.

Your blades are shielded with Dust Armor® which

is a nanotechnology coating that repels dust. For

cleaning the fan, use soft brushes or cloths to prevent

scratching. Cleaning agents may damage the nishes.

11

Maintenance, Operation & Cleaning

Turn Power

ON

Reverse
Switch

www.HunterFan.com

1.888.830.1326

Installing the pull chain pendant - Attach

the pull chain pendant to the short chain

coming from the switch housing.

M3502-01 • 04/14/14 • © Hunter Fan Company

Changing the direction of air ow -

move the reverse switch to the

opposite position.

12

Cleaning the fan - use soft brushes or

cloths to prevent scratching. Cleaning

products may damage the nishes.

Troubleshooting

www.HunterFan.com

1.888.830.1326

Fan doesn’t work

• Make sure power switch is on.

• Pull the pull chain to make sure
it is on.

• Push the motor reversing switch

rmly left or right to ensure that

it is engaged.

• Check the circuit breaker to
ensure the power is turned on.

• Make sure the blades spin freely.

• Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 9.

• Check the plug connection in
the switch housing.

Excessive wobbling

• Make sure the blades are
properly installed on the
blade iron posts.

• Turn the power off, support
the fan carefully, and check
that the hanger ball is
properly seated.

• Use the provided balancing
kit and instructions to balance
the fan.

Noisy Operation

• Make sure the blades are
properly installed on the
blade iron posts.

• Check to see if any of the
blades are cracked. If so, replace
all of the blades.

13

M3502-01 • 04/14/14 • © Hunter Fan Company