Digitaler Satelliten-Receiver
Mit integriertem CryptoWorks
CR-FOX+/AEE
CR-FOX II/AEE
Notice
Thank you for purchasing a HUMAX Digital Satellite Receiver. Please read this user's manual carefully, to be able to safely install, use
and maintain the product at maximum performance. Keep this user's manual next to your product for future reference.
Throughout the whole manual, Note indicates additional product operation information to make the user aware of possible problems and
information of any importance and help understand, use and maintain the installation.
**
Manufactured under license from Dolby Laboratories.
**
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
**
All other trademarks are the properties of their respective owners.
Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright
and copyright law.
**
The information in this user's manual is subject to change without notice.
**
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is
prohibited.
GB 1
Safety Warning
The product has been manufactured to satisfy international safety standards. Please read the following safety precautions and
warnings carefully.
**
•Disconnect the product from the mains before you start any maintenance or installation procedures.
•Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.
•The product should not be exposed to liquid of any kind. In addition, no objects filled with liquid, such as vases, should be placed on
the apparatus.
•Do not stand the product on soft furnishings or carpets. Do not stack electronic equipments on top of the product.
•Do not use any unsupported attachments as these may be hazardous or cause damage to the product.
•Disconnect the product from the mains before connecting or disconnecting the cable from the antenna or TV.
•The LNB cable must be earthed to the system earth for the satellite dish.
•Place the product indoors to avoid exposing it to lightening, rain or sun. Do not place it near a radiator or heat register. Make sure it
has more than 10 cm clearance from any appliances susceptible to electromagnetic influences, such as a TV or a VCR.
Do not block these openings with any object, and do not place the product on a bed, sofa, rug, or other similar surface. If you place the
product on a rack or bookcase, ensure that there is adequate ventilation and that you have followed the manufacturer's instructions for
mounting.
Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can fall. A falling product can cause serious injury
to a child or adult, and serious damage to the appliance.
•Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for
long periods of time.
•Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts.
•When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those
that have the same characteristics as the original part. Unauthorised substitution may result in additional damage to the unit.
GB 2
Contents
1. Before Using the Product ................................................................................. GB5
This chapter provides detailed instructions on the product and its accessories.
1.1 Package Contents
Please check all package contents before using your product.
**
**
Remote Control
**
Batteries
**
**
Note:
•Package contents may vary according to area.
•The product image may differ from the actual product.
User's Manual
**
Scart Cable
**
GB 5
1. Before Using the Product
1.2 Front Panel
**
**
1. STANDBY BUTTON
**
Switches between operation and standby modes.
**
2. TV/RADIO BUTTON
**
Switches between TV and radio modes.
**
3. P-/P+ BUTTON
**
Moves the TV/radio service up or down.
**
4. STANDBY LED
**
Red light is emitted when the product is in standby mode.
Note:
•See 1.4 Conditional Access when you insert the Smartcard.
•The image above is CR-FOX+/AEE.
5. TV LED
**
Green light is emitted when the product is in TV mode.
**
6. RADIO LED
**
Amber light is emitted when the product is in radio mode.
**
7. SMARTCARD SLOT
**
A slot for a Smartcard
**
GB 6
1. Before Using the Product
**
**
1. STANDBY LED
**
Red light is emitted when the product is in standby mode.
2. STANDBY BUTTON
**
Switches between operation and standby modes.
**
3. TV/RADIO BUTTON
**
Switches between TV and radio modes.
**
4. P-/P+ BUTTON
**
Moves the TV/radio service up or down.
**
**
Note:
•See 1.4 Conditional Access when you insert the Smartcard.
•The image above is CR-FOX ll/AEE.
5. TV LED
**
Green light is emitted when the product is in TV mode.
**
6. RADIO LED
**
Amber light is emitted when the product is in radio mode.
**
7. SMARTCARD SLOT
**
A slot for a Smartcard
**
GB 7
1. Before Using the Product
1.3 Rear Panel
**
**
1. LNB IN
**
Connects to a satellite antenna cable.
**
2. VCR SCART
**
Connects to the VCR/DVD using a VCR SCART cable.
**
**
Note: The image above is CR-FOX+/AEE.
GB 8
3. TV SCART
**
Connects to the TV set using a TV SCART cable.
**
4. S/PDIF
**
Outputs digital audio signals.
**
**
**
1. LNB IN
**
Connects to a satellite antenna cable.
**
2. VCR SCART
**
Connects to the VCR/DVD using a VCR SCART cable.
**
3. TV SCART
**
Connects to the TV set using a TV SCART cable.
**
4. AUDIO L/R
**
Connects to the TV or VCR and outputs audio signals.
**
**
Note: The image above is CR-FOX II/AEE.
5. VIDEO
**
Connects to the TV or VCR and outputs video signals.
**
6. RS-232C
**
Connects to the PC to update software.
**
7. S/PDIF
**
Outputs digital audio signals.
**
GB 9
1. Before Using the Product
1.4 Conditional Access
Although some TV and radio channels are free to air, most TV and radio/music channels are available on a subscription basis and can
only be enjoyed via a Conditional Access component.
**
Inserting the Smartcard
The Smartcard looks similar to a credit card and is inserted into the slot behind the right-hand front flap of the product. A valid Smartcard
entitles you to view and listen to all the channels you choose to subscribe to.
1. Open the right-hand flap on the front panel of the product. Swing it upwards to expose the card slot.
2. Hold the Smartcard horizontally with the electronic chip (small square-shaped, gold in colour) facing downwards.
3. Insert the Smartcard into the top slot.
**
**
Note: The product image may differ from the actual product.
GB 10
1.5 Remote Control
1. SOURCE
**
Controls the input of TV.
**
2. TV/RADIO
**
Switches between TV and radio modes.
**
3. NUMERIC BUTTONS
**
Enter a TV/radio service number.
**
4. MENU
**
Displays the main menu.
**
5. TIME - WHITE
**
Displays the current time on the screen. To set the
current time, refer to 8.2 System Setting.
**
6. ARROW BUTTONS
**
Changes services or moves the cursor up, down, left
or right.
**
7. i (INFORMATION) - RED
**
Displays the channel and programme information.
**
8. SOUNDTRACK - GREEN
**
Displays the soundtrack list.
GB 11
1. Before Using the Product
9. CH-/CH+
**
Changes the service.
**
10.RECALL
**
Returns to the previous service.
**
11.FREEZE
**
Freezes the TV screen you are watching. Does not
cease audio.
**
12.WIDE
**
Sets the display format.
**
13.STANDBY
**
Switches between operation and standby modes.
**
14.GUIDE
**
Displays the programme guide.
**
15.EXIT
**
Exits all On-Screen Display (OSD) screens.
**
16.OK
**
Selects a menu or confirms the selected operation.
Also, displays the channel list while watching a
programme.
17.ZOOM - BLUE
**
Enlarges the picture.
**
18.SUBTITLE - YELLOW
**
Displays the subtitle language list.
**
19.V-/V+
**
Adjusts the audio volume.
**
20.MUTE
**
Mutes or unmutes the audio temporarily.
**
21.UHF
**
Currently not supported.
**
22.? (HELP)
**
Displays the property of service on the screen.
Please refer to 5.4 Setting Property of Service.
**
** COLOUR BUTTONS (R/G/B/Y/W)
**
Select color keys for interactive applications.
GB 12
2. Setup
2.Setup
This chapter describes how to set up the product. Select the most appropriate procedure depending on your requirements. Before you
connect the product to any other equipment, you must disconnect all equipments from their power sources.
Note: If you encounter any problem when setting up the product, please contact your local product distributor.
2.1 Connecting the Antenna/TV/VCR
**
**
1. Connect the antenna to the LNB IN.
2. Connect the product and the TV/VCR using the SCART cable or the RCA cable.
**
Note:
•Connecting your TV directly to the Audio/Video output of the product will assure a more vivid picture and enhance your viewing
enjoyment.
•The product image may differ from the actual product.
GB 13
2. Setup
2.2 Connecting Audio System
**
**
1. Connect the optical S/PDIF terminal and Dolby Digital decoder for higher quality sound.
**
Note: The product image may differ from the actual product.
GB 14
2.3 Powering On
**
1. Connect the power cord of the product to a wall outlet.
**
**
2. Power on by pressing the STANDBYbutton on the remote control or the STANDBYbutton on the front of the product.
**
**
Note: The product image may differ from the actual product.
GB 15
Loading...
+ 35 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.