The number of favorite page can adjust in configuration menu.
Favorite preset memory
It have 6 favorite pages and store up to 48 stations regardless of AM or FM band.
It can store current station by the following procedure
Step 1: Seek station or tune station manually you want.
Step 2: Select the favorite page by pressing [FAV/INFO].
Step 3: Press and hold [PRESET #] more than 1 second
By above procedure, the 48 stations are stored in the favorite preset memory.
Recall favorite preset
You can listen to the station stored in the favorite preset by the following procedure.
Step 1: Select the favorite page by pressing [FAV/INFO].
Step 2: press [PRESET #] which is stored the station you want to listen to.
Auto-store Function Auto-store
Press [FAV] more than 1 second, then radio starts auto-store function.
Traffic announcement reception
Press the [TP] to listen the traffic announcement from other station.
Traffic announcement reception cancel
Press the [TP/MENU] to cancel the traffic announcement reception the radio make the traffic announcement
disable.
Traffic station seek
Press the [TP/MENU] in the station don't
the next
station that have the traffic announcement.
have traffic information, the Infotainment system 87 radio search
Radio Reception
Radio reception may be disrupted by static, noise, distortion or loss of reception due to „ changes in distance
from thetransmitter,multi-path reception due to reflection andshadowing.
Audio players
CD Player
As each CD is inserted, the radio will appear on the display and as each CD is loading, File check will
appear on the display.
Once playback begins, the track and track number will appear on the display.
Page 5
If the ignition or radio is turned off with a CD in the player, it will stay in the player. When a CD is in the
player and the ignition is turned on, the radio must be turned on before the current CD will start playback.
When the ignition and radio are turned on, the CD will start playing where it stopped, if it was the last
selected audio source.
The CD player can play the smaller 3 inch (8cm) single CDs with an adapter ring. Full-size CDs and the
smaller CDs are loaded in the same manner.
If playing a CD-R, the sound quality may be reduced due to CD-R quality, the method of recording, the
quality of the music that has been recorded, and the way the CD-R has been handled. There may be an
increase in skipping, difficulty in finding tracks, and/or difficulty in loading and ejecting. If these problems
occur, check the bottom surface of the CD. If the surface of the CD is damaged, such as cracked, broken, or
scratched, the CD will not play properly. If the surface of the CD is soiled, see Care of Your CDs for more
information.
If there is no apparent damage, try a known good CD.
Do not add any label to a CD, it could get caught in the CD player. If a CD is recorded on a personal
computer and a description label is needed, try labeling the top of the recorded CD with a marking pen
instead.
Caution
If you add any label to a CD, insert more than one CD into the slot at a time, or attempt to play scratched or
damaged CDs, you could damage the CD player. When using the CD player, use only CDs in good condition
without any label, load one CD at a time, and keep the CD player and the loading slot free of foreign materials,
liquids, and debris.
Disc Insert
Insert a CD into a CD slot with CD label up, then the radio insert into the slot automatically and does
playback.
CD Playback Mode Selection
Insert a CD into CD deck, then the radio goes to the playback mode. Or press the [CD] to playback the
disc from other mode when CD is inserted.
Infotainment system 89
Press the [EJECT], then the disc willbe ejected from the radio.Pull out the disc out of the radio.
Pause
Press [CD] to pause playback while a CD is playing back."PAUSE'
to start playback.
Next/Previous Track
Press [TUNE UP/TUNE DOWN], then the radio starts playback of the next/previous track.
CD EJECT
will flash on the display.Press [CD] again
Fast forward/Fast reverse
Press and hold [TUNE UP/TUNE DOWN], then the radio plays back fast forward/fast reverse.
Next/Previous Folder - only MP3/WMA disc
Press [SEEK UP/SEEK DOWN], then the radio start playback of the next/previous track.
RPT (Repeat)
Press [2 RPT], then radio plays back current track repeatedly. To cancel this function, press [2 RPT] again.
RDM (Random):
Press [3 RDM], then radio plays back tracks randomly.To cancel this function, press [3RDM] again.
INT (Intro-Scan):
Press [4 INT], then radio plays back just 10 seconds of the current track, jump to next track and do this
actionrepeatedly.To cancel this function, press [4 INT] again.
All/Directory Mode - only MP3/WMA disc
Page 6
Repeat, intro-scan and random function operates in this folder when"all mode" is active.Press [1 DIR] then
radio operates inthe directory mode.To cancel this function, press [1 DIR] again.
ID3 Tag information display - only MP3/WMA disc
Press [FAV/INFO], the radio displays the ID3 tag information of the current files.
Auxiliary Devices USB playback mode USB Playback Mode Selection
Press the [USB] to change to play back the USB files from other mode.
USB memory insertion
Insert a USB memory into the USB socket, so the radio plays back the USB files automatically.
USB Extraction
Pull the USB memory from the USB socket by hand.
* Other functions are same with CD mode.
AUX mode
The radio has one auxiliary input jack(diameter 3.5mm) located on the lower right side of the faceplate.
This is not an audio output; do not plug the headphone set
You can however, connect an external audio device such as an iPod, laptop computer, MP3 player, CD
changer, or XM™‚ receiver, etc. to the auxiliary input jack for use as another source for audio listening.
AUX In Mode Selection
Press [AUX] in the other playback mode. If the auxiliary jack isn't detected for the presence of an output jack
the aux mode will be prevented.
Step 2. Choice Bluetooth Settings (By pressing menu button at Bluetooth settings)
Step 3. Choice Sound&Signals (By pressing menu button at Sound&Signals)
Step 4. Choice Ring volume (By pressing menu button at Ring volume)
Step 4. Choice Ring tone (By pressing menu button at Ring tone)
1. Adjust Ring volume
Ring volume means that let user know incoming call’s ringing.
Ring volume is louder toward 3
2. Adjust Ring Tone
User can choice incoming ring tone. The number of ring tone are 5.
Phone Book Access Profile])
Page 8
Bluetooth factory restore
Step 1. Press phone or config button
Step 3. Choice Bluetooth Settings (By pressing menu button at Bluetooth settings)
Step 4. Choice Factory restore (By pressing menu button at Factory restore)
Step 5. Choice Ring volume (By pressing menu button at Ring volume)
Step 5. Choice Ring tone (By pressing menu button at Ring tone)
** While device is downloading phonebook, connection would be disconnected => After
downloading complete, device could be connected automatically**
Ö During download phonebook, our device doesn’t support Handsfree function.
** A2DP could not be played, if you don’t have tried to start to play music by phone after
connection.**
Steering wheel audio controls
[PWR]
Power on: Press this button. Power off: Press this button more than 1 second.
Audio mute: Press this button when the power is on.
[+]
Press [+] button to increase the audio volume. Press this button, then the radio increases the audio level. If
this button is pressed more than 1 second, then the radio increases the audio volume step by step.
[–]
Press [–] button to decrease the audio volume. Press this button, then the radio increases the audio volume.
If this
button is pressed more than 1 second, then the radio decrease the audio volume step by step.
[SEEK]
RADIO MODE
Press this button to move to next preset station. (Favorite preset #1→ #2→ #3→ #4...)
Press this button more than 1 second to search for the next station.
.
CDP MODE
Press this button to jump to the next track. (Track01→Track02→...) Press this button more than 1
second to play back the track fast forward.
[MODE]
The play mode will be change by following order whenever this button is pressed.
FM→AM→(CDP)→(USB)→(AUX )→FM... The radio skips the CDP mode if there is no disc in the radio. The
radio skips the USB mode if there is no USB memory on the radio. The radio skips the AUX mode if there is
aux jack in the socket on the radio.
General section
Power supply DC 14.4V Negative Ground
Speaker impedance 4 ohm
Max. Power
Weight 2210 g
Dimension 226 x 101 x 180
20Wrms per channel into 4 channels at Vbatt = 14.3 V with THD ≤ 5%.
Active Current Max 10A
Page 9
MP3[WMA]/CD section
MP3
Variable Bit Rate (VBR)
8~320Kbps
Sample Rates : 16, 22, 32, 44.1, 48KHz
Channel : Mono, Stereo, Joint Stereo
Playlist Format (m3u, pls)
Support ID3 V1, v2X tag, ASCIIand Unicode.
WMA
Support for WMA 9 and over
Support Meta Data (ㅡ*.wax, *.asx (*.asf)…)
Presentation of the file system according to ISO file hierarchy and Flat file structure
incl. Joliet Extension
CD Optical Disc Format Support
CDDA, CDR, CDRW, CDROM, Mixed Mode CD, Open Session CD, "Book on Disc" audio content
This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the
modifications are expressly approved in the instruction manual. The user could lose
the authority to operate this equipment if an unauthorized change or modification is
made.
NOTE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment may cause harmful inter- ference to radio communications, if it is not
installed and used in accordance with the instructions. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful inter- ference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
Page 21
correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IC (Industry Canada) Notice
Operation is subject to the following two conditions : (1) This device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device. The term “IC:” before the
certification/registration number only signifies that the Industry Canada technical
specification were met.
Caution
This device complies with part 15 of the FCC rules. Operation is subject to the
following conditions:
(1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.