
FCC ID : YRN-AGC-0060RF
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved in
the instruction manual. The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment may cause
harmful inter- ference to radio communications, if it is not installed and used in accordance
with the instructions. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful inter- ference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
This device complies with part 15 of the FCC rules. Operation is subject to the following
conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a minimum
distance of 20 centimeters between the radiator and your body.

MENU
RADIO TEXT
Settings
PUSH
PUSH
RADIO
TEXT
Current FM station name
XXXXXXXXXXXX
YYYYYYYYYY
Tempo ..
PUSH
Return to current Audio source
Audio Bass, Treble, Balance, Fader
UDIO BASS
TREBLE
BALANCE
Parameters are : Bass, Treble, Balance, Fader (and go back to previous screen)
PUSH
Radio text displays up to 64 characters
Radio text of the current FM radio
station listened
If no information available, display "No
message"
TREBLE
PUSH
Change attribute -5 to +5
to validate
PUSH
Loudness
BACK
Loudness
PUSH
Set Option On/Off
O
AUX IN LOW/MID/HI
O
AUX IN
MID
LOW
O
HIGH
ON
OFF
Sets appropriate parameter (On
or Off)
Switch to the other line
PUSH
To validate (and go back to
revious screen
Switch to the other line
PUSH
To validate (and go back to
previous screen)
LOW - 300 mV
MID - 600 mV
HIGH - 1200 mV
Renault values)
PUSH
SPEED VOLUME Set 0 - 5 (0 is OFF)
0
Speed vol.
Language
BACK
Language Language1
List of Languages
O
O
O
1
2
O
Language2
Language3
PUSH
PUSH
Switch to the other line
To validate (and go back to
previous screen)
Switch to the other line
To validate (and go back to
revious screen

PUSH
RDS OPTIONS
PUSH
BACK
Default audio parameters
Set options
RDS AF
TA
REG
BACK
Set default audio parameters (yes /
No)
Reinitialize
audio
parameters
RENAULT Parameters are : AF, TA, REG, PTY31
PUSH
TA
O
O
YES
NO
ON
OFF
Sets adefault audio parameters
(yes or no)
Switch to the other line
PUSH
To validate (and go back to
previous screen)
Switch to the other line
PUSH
To validate (and go back to
revious screen
Pair Device
**
PUSH
Ready to Pair
BAD PIN INPUT -
MAX devices already paired
Remove one before pairing a new
MOBILE PHONE
Ready to Pair screen
Pin: 1234
NISSAN & RENAULT PIN : 1234
Max Devices screen
one
Cell phone
input of pin
Pairing
Connecting...
Max Devices Question
Delete a Phone Now?
YES
NO
Pair OK - Connection
ANICALL HC2300
CONNECTED
Pairing Failed
Return to current
Audio source
Pair Device in
Menu **
Pairing
Failed
BAD PIN INPUT -
AUDIO DEVICE
without pin code
Connecting...
AUDIO DEVICE
with pin code
Pin code :
3 5 _ _
0123456789 VALIDATE
Renault:
The user has to enter the 4 digit pin code of its
Bluetooth audio device
Connection
AUDIO DEVICE
CONNECTED
Pairing
Connecting...
Return to current
Audio source
Pair OK - Connection
ANIAUDIO DEVICE
CONNECTED
Return to current
Audio source

Select Device
PUSH
BACK
List of Paired Devices
NISSAN : When no device connected
RENAULT : with or without connected device
Device A
O
Device B
Device C
O
Renault:
n icon is located near of the device name, to show the user
the type of device :
1) Phone
2) Audio device (A2DP)
3) Phone with audio capabilities
PUSH
Connecting...
Connection
Device B
CONNECTED
Return to current Audio source
Delete device
Bluetooth
PUSH
BACK
PUSH
BACK
List of Paired Devices
(When nodevice connected)
O
O
Device A
Device B
Device C
ON/OFF
Bluetooth
O
OFF
ON
Deleted
PUSH
Device B
DELETED
PUSH