Huffy SKM 1030 User Manual

printed on recycled

02/02 P/N 201008

Customer Service Center

N53 W24700 South Corporate

Circle

Sussex, WI 53089

A Huffy Company

IMPORTANT!

We appreciate your purchasing one of our many fine products. We are sure that you will be very satisfied with your selection. Although great care and effort have been taken, problems may occur. To ensure prompt and correct handling of any problems, or to answer any questions, please

REQUIRED TOOLS AND

MATERIALS:

• Two of each: 3/4”, 7/16”, 1/2” and 9/16” Wrenches

Universal Mounting Bracket

SAFETY

INSTRUCTIONS

Internet Address: http://www.huffysports.com

NOTICE TO ASSEMBLERS

ALL Huffy Sports basketball Systems, including those

used for DISPLAYS, MUST be assembled and ballasted with sand or water according to instructions. Failure to follow instructions could result in SERIOUS INJURY. It is NOT acceptable to

The NBA and individual NBA member team identifications reproduced on this product are trademarks and copyrighted designs, and/or other forms of intellectual property, that are the exclusive property of NBA Properties, Inc. and the respective NBA member teams and may not be used, in whole or in part, without the written consent of NBA Properties, Inc.

PARTS LIST

Item Qty. Part No. Description

1 6 900099 Short Angle, Black 2 1 900814 Long Angle, Black 3 2 900815 Strap, Long 4 6 200580 Angle Bracket 5 2 204102 U-bolt, 3/8-16 x 4-1/4 6 4 203309 Flat Washer, .406 I.D. x 1.0

O.D.

7 4 203017 Hex Nut, 3/8-16 8 1 2 201107 Capscrew, Hex Head, 1/4-20

x 1/2

9 1 2 203326 Lock Washer, 1/4 1 0 1 2 203228 Hex Nut, 1/4-20 1 1 1 900104 Short Strap 1 2 4 203103 Carriage Bolt, 5/16-18 x 1-1/2

The UNIVERSAL MOUNTING BRACKET is a versatile assembly which allows you to mount your backboard to a pole, on a wall, or on a flat roof or a slanted roof of any pitch. Although the shape of a backboard may vary, it will not affect the installation procedure. Keep in mind that the official height of a basketball goal is 10 feet from the playing surface to the top of the goal rim.

IMPORTANT!!

Because installation circumstances cannot be predicted, anchoring and fastening hardware cannot be provided with this kit to mount the UNIVERSAL MOUNTING BRACKET to your particular wall or roof. Long wood screws are recommended for wood and shingled walls and roofs. Expandable anchors are recommended for cement or brick walls and roofs. Consult your local hardware store for the appropriate anchoring and fastening hardware.

WARNING: To ensure your safety, DO NOT attempt to

assemble this system without following the instructions carefully. BEFORE BEGINNING ASSEMBLY READ THE INSTRUCTIONS, AND IDENTIFY PARTS using the hardware identifier and parts list in this document.

WARNING: This system is not designed to support a

player hanging from the goal or net. Failure to observe this caution may cause bodily injury and/or property damage.

WARNING:Mounting the backboard is performed at an

elevated height, for your own safety, use a ladder. Two people are required for this operation, one person should not attempt this alone. Use proper precautions.

P/N 201008 02/02

printed on recycled

HARDWARE IDENTIFIER

Item #9 (12)

Item #6 (4)

Item #7 (4)

Item #10 (12)

Item #12 (4)

Item #13 (4)

Item #8 (12)

printed on recycled

02/02 P/N 201008

POLE/WALL MOUNT FOR FAN OR RECTANGULAR MOLDED PLASTIC BACKBOARDS

IMPORTANT! Finger tighten nuts and bolts until bracket is completely assembled.

1. Assemble short angles to long angle as shown.

2. Assemble short angles. Assemble bolts as shown.

3. Assemble bracket with brace. Fully tighten all nuts and bolts after assembly.

4. Install angle brackets as shown. 5 . IMPORTANT! Hardware supplied is designed for a 3 1/2” diameter pole. Consumers

must provide necessary hardware for poles of other sizes.

Assemble U-Bolts to brackets loosely. Tighten when desired goal height is reached. Official NBA goal height is 10 feet (3.05m).

6. Mount bracket to wall, then install backboard.

7. Mount to roof.

ASSEMBLE

+ 7 hidden pages