Huffy Pro Aluminum Scooter Owner's Manual
Pro Aluminum Scooter
Owner’s Manual
This manual contains important safety, assembly, operation
and maintenance information.
Please read and fully understand this manual before operation.
Save this manual for future reference.
HProScooter EN 120712 m0041
Copyright Huffy Corporation 2012
Index
ENGLISH
• Assembly Instructions ........................................................................3
• Safety Information .................................................................................4
• Operation ...............................................................................................6
• Maintenance ..........................................................................................6
• Warranty ................................................................................................7
Parts List
8
3
8
7
4
5
6
1 Frame Deck
2
Description
1
6
5
2 Fork Assembly
3 Handlebar
4 Handlebar Clamp
5 Wheel (x2)
6 Wheel Hardware
7 Fender/Brake
8 Handlebar Grip (x2)
2
ASSEMBLY INSTRUCTIONS
Note: Clamp (2) may be pre installed from factory on Handlebar Post (3) and may
need to be loosened before assembly.
1. Make sure the Front Wheel (1) and Lock Button (A) are facing forward as shown.
2. Place Clamp (2) onto Handlebar Post (3) so that Clamp is even with bottom of
Handlebar Post (View B) and Slot (C) is facing forward.
3. Slide Handlebar and Clamp onto Threaded Steering Tube (4) until Lock Button
(A) snaps into top of Cutout Slot (C).
4. Tighten Clamp Screws (5) evenly and securely so that the Handlebar does not
move.
A
5
2
A
4
3
C
B
1
3
Loading...