Huffy 89135 User Manual

05/03 P/N 211695

1

Customer Service Center

N53 W24700 South Corporate Circle

Sussex, WI 53089

U.S.A.

A Huffy Company

IMPORTANT!

We appreciate your purchasing one of our many fine products. We are sure that you will be very satisfied with your selection. Although
great care and effort have been taken, occasionally problems may occur. To ensure prompt and correct handling of any problems, or to
answer any questions, please contact the Sample and Display Technician at 414-820-3440 ext 401.

REQUIRED TOOLS AND

MATERIALS:

• (Two) 3/4” Wrenches

• ( 6)-60 lbs. 360 lbs. (163.3 kg) Bags of Sand

Model 89135 Display Unit for In-Ground Models

SAFETY INSTRUCTIONS

FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY

RESULT IN SERIOUS INJURY,

PROPERTY DAMAGE AND WILL VOID WARRANTY.

This unit is intended for display purposes only and should

not be used for play.

To ensure safety, do not attempt to assemble this system without fol­lowing the instructions carefully. Before beginning assembly, read the
instructions and identify parts using the hardware identifier and parts
list in this document. Proper and complete assembly, use and supervi­sion is essential for proper operation and to reduce the risk of accident
or injury. A high probability of serious injury exists if this system is not
installed, maintained, and operated properly.

• Display must have a minimum of 369 lbs. (163.3 kg) of added ballast

located as shown in instructions to keep pole assembly upright.

• Backboard and rim assembly must be centered directly over base.

• During assembly, if using a ladder use extreme caution. Two people

are required for this precedure.

• Adjust leveling bolts to ensure a level display surface.

• If technical assistance is required, contact Huffy Sports’ Sample and

Display Technician.

• Minimum operational height is 6’6” (2 m) to the bottom of backboard.

Most injuries are caused by misuse and/or not following instructions.

Use caution when using this unit.

printed on recycled paper

WARNING

205920 3/98

PART LIST

Item Qty. Part No. Description

1 1 900004 Base
2 4 206246 Bolt, 1/2-13 x 1-1/2 Long
3 1 908084 Cover, Black
4 4 206270 Washer, 9/16 I.D., 1-1/16 O.D.
5 4 201646 Locknut, Hex, Center-Lock, 1/2-13

2

P/N 211695 05/03

2

LEVELING

BOLT

5

1

4

3

360 LB. (163.3 KG)

MINIMUM WEIGHT REQUIRED.

WARNING

Pole leveling will be
required prior to
backboard
installations.

Secure pole unit on
display base before
installing backboard
assembly.

*Refer to instructions
included with pole unit
for proper installation,
warnings and safety
instructions.