Huebsch Filter-Aire 2000 User Manual
Do not attempt to install the unit yourself unless you are a trained service technician. This
may affect the safety and functioning of the machine.
Read this manual thoroughly before using the unit and retain for future reference.
Content
Specifications & UL certification ............................................................................ 3
Precautions ............................................................................................................ 4
Components & Dimensions .................................................................................... 5
Packing list ............................................................................................................. 6
Installation ............................................................................................................. 7
Trouble shooting .................................................................................................... 8
Electrical Schematic ............................................................................................... 8
Use ....................................................................................................................... 10
Cleaning Instructions ........................................................................................... 11
2
Rated Voltage
A120V
Motor
Brushless DC motor
Input Power
1700W
Induction method
IR Blocking
Wind Velocity
95m/s
Protection class
IPX4
Heating Power
950W
Dimensions
11.81’’ x 8.46’’ x 27.56’’
(300 x 215 x 700mm)
Net weight
23 LBS (10.4 kg )
Self Protection
This machine has the built-in self protection functionality and will automatically stop after 25 seconds.
To continue use, withdraw your hands and put them into the dryer again.
Specifications
UL certification
This hand dryer model has passed government regulated safety tests performed by
Underwriters Laboratories meeting all safety specifications.
3
WARNING: Misuse may cause injury.
Precautions
To avoid electric shock do not open the front panel.
Do not pull or hang on the machine.
Do not use the unit in a wet environment and away from standing water.
Do not modify or dismantle the unit if not necessary.
A suitably rated fused power supply is required
Ensure the correct power supply is used. If power tolerance is over +/-10%, the unit may
malfunction, causing fire or electric shock.
The power must be turned off during maintenance.
The drain tank and air filter must be installed for proper operation. Do not empty or
replace after the power has been turned on.
Remove from power source and close leakage circuit breaker if the unit is under
abnormal status.
Ensure the unit has a reliable ground connection.
Do not install when connected to a power supply.
The hand dryer must be installed by a qualified electrician.
If the power cord is damaged, it must be replaced by the manufacturer, its service
agent, or a qualified person.
A residual current device (RCD) with a rated residual operating current not exceeding
30mA is recommended.
Environmental consideration
Do not dispose of electrical waste with household waste. Please recycle in appropriate
facilities. Check with your local authority or retailer for recycling advice.
4
Loading...