HuddleCamHD 10x 720 User Manual

Ver 1.1 1/30/15

Precautions………………………………………………………………………………………….

Safety Tips…………………………………………………………………………………………….

• Please read this manual carefully before using the camera.

• Avoid damage from stress, violent vibration or liquid intrusion during

transportation, storage or installation.

• Take care of the camera during installation to prevent damage to the

camera case, ports, lens or PTZ mechanism.

• Do not apply excessive voltage. (Use only the specified voltage.)

Otherwise, you may experience electrical shock.

• Keep the camera away from strong electromagnetic sources.

• Do not aim the camera at bright light sources (e.g. bright lights, the sun,

etc.) for extended periods of time.

• Do not clean the camera with any active chemicals or corrosive detergents.

• Do not disassemble the camera or any of the camera's components. If

problems arise, please contact your authorized dealer.

• After long term operation, moving components can wear down. Contact

your authorized dealer for repair.

Supplied Accessories…………………………………………………………………………….

• 10x Zoom 720P USB 2.0 HD Video Conference Camera (1)

• 12V/2.0A DC Power Adapter (1)

• Tripod Mounting System (1)

• Ceiling Mounting System (1)

• USB 2.0 Data Lines (3m), Serial Control Line, RS-232C to RS-485 Cable

• IR Remote Controller

Ver 1.1 1/30/15

• Control Cable (1)

• User Manual (1)

Rear Board Connectors…………………………………………………………………………

High Definition Interface: USB 2.0

Control Signal Interface: mini DIN-8 (VISCA IN, VISCA OUT/RS485)

Control Signal Configuration: Dip-Switch Pin 7/TTL Signal; Baud Rate: 9600bps

Power Supply Interface: DC 12V Socket

Electrical……….…………………………………………………………………………………….

Power Supply Adapter: 12V DC/2A

Input Voltage: 12V DC (10.5-14V DC)

Input Power: 24W (MAX)

Structure……………………………………………………………………………………………….

Material: Aluminum, Plastic

Dimensions (W x H x D): 4.88 in. (123.952mm) x 5.75 in. (146.05mm)

x 4.75 in. (120.65mm)

Mass: 1.46 lbs. (0.67kg.)

Working Environment: Indoor

Operating Temperature: 32ºF (-0ºC) to 113ºF (+45ºC)

Storage Temperature: -14ºF (-10ºC) to 140ºF (+60ºC)

Color: Silver Gray

Rear Board & Function………………………………………………………………………..

Ver 1.1 1/30/15

1. Front View…………………………………………………………………………………….

1. Lens

10x Optical Zoom.

2. IR Receiver

To receive IR remote controller signal.

3. Power LED

Blue LED blinks when unit is powered, Orange LED blinks for Stand-By status.

4. IR Receiver

To receive IR remote controller signal.

2. Rear View………………………………………………………………………………………….

Ver 1.1 1/30/15

5. DC IN 12V Socket

Only use the Power Adapter supplied with this camera.

6. IR Receiver

To receive IR remote controller signals.

7. VISCA IN Port

For hard wired remote control from a 3

rd

party PC, joystick, etc...

8. VISCA Out Port/RS485

Used for daisy chaining multiple cameras for RS-232 RS-485 control.

9. USB 2.0 Interface

For connection to PC USB 2.0 port. Will also function in a USB 3.0 port as USB

2.0 device.