Hubbell LMTS User Manual
Hubbell Industrial Controls, Inc.
Manual Transfer Switches
Bulletin LMTS-1
Features:
Single Handle Operator (up through
1200 Amps)
Type 1 enclosed
Non-fused
Key lockable
Quick Break-Quick Make Contacts
UL Listed components
DPDT Auxiliary Contacts
2, 3, & 4 poles available
Sizes from 40A-4000A
Interlock allows door opening only
when switch is in off position
Terminals accept copper or aluminum
cable
(February 2008, repl. April, 2001)
LMTS
Application Information:
Hubbell manual transfer switches are designed
to provide dependable transfer of power from
one source to another while preventing
potentially dangerous feedback from the
generator to the utility system.
These switches are available in 2, 3, or 4 pole
configurations from 40-4000 Amps. Single
handle transfer mechanisms are used through
1200 Amps. Double handles may be used for
1600 Amps and above.
LMTS type switches include 'UL listed
components and are built to ''meet or
exceed UL98 and UL508 standards. These
devices are typically installed with a generator
in a standby power system. The purpose of
which is to provide an alternate source of
power for residential or commercial
applications where the loss of power could
cause discomfort, interruption of business, or
damage to products or contents.
Optional Features:
Solid Neutral
Ground Bar
Type 3R, 4X or 12 rated enclosures
Service Entrance Rating
Meter groups: Volts, Amps,
Frequency
Light groups: Power Avail., Switch
Position
Lockable in all three positions
Fusible
Consult factory for features not listed
Key Components:
g
1. Manual transfer mechanism:
Normal-Off-Emergency
2. NEMA Type 1 enclosure
3. Power available light:
Emergency (optional)
4. Locking handles (optional)
5. Power available light: Normal
(optional)
6. Emergency source connection
7. Load connection
8. DPDT Auxiliary contacts
9. Normal source connection
10. Quick Break-Quick Make
contacts
Enclosure Dimensions & Weights
(for estimating purposes only-consult factory for actual dimensions)
# of Poles Amp Rating H W D Wt.
2 & 3 40-100 14" 12" 8"
2 & 3 125-200 30" 30" 12" 150#
2 & 3 400 48" 36" 12" 425#
2 & 3 600 48" 36" 12" 450#
2 & 3 800 78" 60" 30" 600#
2 & 3 1200 78" 60" 30" 650#
2 & 3 1600-2000 91" 60" 30" 1400#
2 & 3 2500-3000 92" 60" 31"
2 & 3 4000 92" 60" 31"
LMTS Short Circuit Ratings:
with upsteam protective device as shown
Amp
Rating Fuse Size Amperage Breaker Size Amperage
(Amps-max.) (max.) (Amps-max.) (max.)
40 110 *10,000 100 10,000
60 110 *10,000 100 10,000
80 110 *10,000 100 10,000
100 110 *10,000 100 10,000
125 200 *100,000 200 25,000
200 200 *100,000 200 25,000
400 600 *100,000 600 50,000
600 600 *100,000 600 50,000
800 1,200 **100,000 1,200 50,000
1200 1,200 **100,000 1,200 50,000
1600 2,000 **100,000 2,000 65,000
2000 2,000 **100,000 2,000 65,000
2500 3,000 **200,000 3,000 25,000
3000 3,000 **200,000 3,000 30,000
4000 4,000 **200,000 4,000 30,000
Fuse
w/Circuit Breakerw/Current-Limitin
*=Type RK5 fuse
**=Type L fuse
Hubbell Industrial Controls, Inc.
A subsidiary of Hubbell Inc.
4301 Cheyenne Drive, Archdale, N.C. 27263
Telephone (336) 434-2800 • FAX (336) 434-2803
http://www.hubbell-icd.com
sales@hubbell-icd.com
Loading...