Huawei U9202L-3 Users Guide

Installing USIM card, Battery and microSD Card
Getting to Know Your Phone
Figures in this guide are provided for your reference only. Depending on the software version, your phone's user interface may be different from the user interface shown in the gures.
Using the Touchscreen
Notication Panel
Home Screen Locking and Unlocking the Screen
Making and Receiving Calls Contacts
1
2
Removing battery cover Installing USIM card
3
Installing *micro SD card
4
Installing battery
a
5
Installing battery cover
*micro SD card is optional
b
4 5
2
1
6 7
8
3
10 11
12 13
Status indicator
Steady green: The phone is charging and the battery level is high or full. Steady yellow: The phone is charging and the battery level is higher than 10%. Steady red: The phone is charging and the battery level is low. Blinking red: The battery level is low and the phone needs to be charged.
1 Status indicator 7 Noise reduction microphone
2
Secondary camera 8 Camera
3
Headset jack 9 Speaker
4
Earpiece 10 Flash unit
5
Charger jack/USB port 11 Power key
6
Microphone 12 Volume keys
Press and hold to power on your phone.
Press and hold to display the options menu from
where you can power off the phone and perform some shortcut operations.
Press to lock the screen when your phone is active.
Press and hold for 10 or more seconds to forcibly
power off the phone.
To
uch to return to the previous screen.
Touch to exit the current application.
To
uch to return to the Home screen.
Touch to display the current screen's options menu (some screens have no menu).
Power off your phone before installation.
Do not install or remove a USIM card or a microSD card when your phone is powered on.
When charging your phone while it is powered on, the battery is fully charged when the battery icon changes to .
Use the charger provided with your phone. If the phone has not been used for a long time or if the battery charge is fully depleted, the phone may not power on immediately after the charger is plugged in. Please charge the battery for a while before attempting to power on the phone.
Powering Your Phone On
Press and hold the key to power on your phone. If this is the rst time you have powered on the phone, congure its
initial settings. If your SIM card is PIN-protected, enter the personal identication number (PIN) to use the phone.
Powering Your Phone Off
Press and hold the key to display the options menu, and touch
to power your phone off.
Power off
If your phone malfunctions or cannot be properly powered off, press and hold the Power key for at least 10 seconds to forcibly power off your phone.
Battery status indicator
To
uch: Touch the screen to select an
option or start an application.
uch and hold: Touch and hold the
To screen or text being edited to display the available options menu.
Slide: Quickly drag your nger across the screen vertically or horizontally.
uch and hold an item, and then
Drag: To drag it to the desired location on the screen. For example, on the Home screen, you can move an icon by dragging it to another location or remove an icon by dragging it to
the trash can.
Opening the Notication Panel
Drag the status bar from the top of the screen downwards to open the notication panel, where you can do the following:
Quickly start an application.
Slide your nger left or right on a notication to delete it. uch X to delete all notications.
To
uch to display the
To
Closing the Notication Panel
Drag the tab at the bottom of the notication panel upwards.
Settings
screen.
This section uses the default theme as example.
Status bar Displays notification and status icons. Drag downwards to open the notification panel.
Display area Your phone's major display area.
Touch to open the application list. Shortcuts
Before dragging an icon on the Home screen, touch and hold the icon until your phone vibrates. Then you can drag the icon to another location or the trash can.
Viewing Other Home Screen Panels
To switch between different Home screen panels, slide your nger left or right across the screen.
Customizing the Home Screen
From the Home screen, you can touch to do the following:
Change the wallpaper.
Change the theme.
Enable or disable the 3D Home theme.
Manage applications.
Go to
.
Settings
Touch and hold a blank area on the Home screen to quickly change the wallpaper.
Drag an application icon onto another application icon to create a folder.
Locking the Screen
If the phone is active, press the key to lock the screen.
If the phone is idle for a specied period of time, the phone
automatically locks its screen.
Unlocking the Screen
If the screen is off, press the key to turn it on. If you drag the central lock icon to the lock icon on the right side
of the screen, the Home screen is displayed. If you drag the central lock icon up, down, or left until it reaches the icon in that direction, you can quickly access the application corresponding
to that icon.
Making a call
From the Home screen, touch > to make a call.
to access the dialer
Phone
Receiving a Call
When there is an incoming call, you can perform the following:
Answer t
Reject the call: Drag the
Reject the call with a text message: Drag the icon up to
he call: Drag the icon to the right to answer the
call.
icon to the left to reject the call.
reject the call and send a predened message to the caller.
From the Home screen, touch > contacts screen.
Importing Contacts from the USIM Card
1. From the contacts screen, touch
2. To
uch
Copy from SIM card
3. Select the contacts you want to import, or touch to import all the contacts.
4. To
uch
COPY
5. Select the account to which you want to import the contacts.
Creating a Contact
From the contacts screen, touch , select an account, then edit and save the contact information.
to access the
People
> Manage contacts.
.
SELECT ALL
.
Text Input
Messaging and Email
Getting Connected Multimedia
Security Guard Installing Applications
Certication Information (SAR)
Quick Start Guide
Welcome to HUAWEI
V100R001C00_01
Please visit www.huaweidevice.com/worldwide/support/hotline for recently updated hotline and email address in your country or region. Model: HUAWEI U9202L-3
You can enter text using the onscreen keyboard.
Touch a text eld to open the onscreen keyboard. uch to hide the onscreen keyboard.
To
Switching Between Text Input Methods
When the onscreen keyboard is open, you can select the desired text input method from the notication panel.
Using the Huawei Text Input Method
Flick left or right across the screen to switch between the QWERTY and alphanumeric keyboards.
Touch to enter number input mode.
Sending a Message
1. From the Home screen, touch >
2. To
uch .
3. Enter the recipient's phone number and compose the message.Touch to add multimedia files, such as pictures, audio les, or slides.
uch to send the message.
4. To
After you add multimedia les, the message changes from text message to multimedia message automatically.
Messaging
Sending an Email
Before sending or receiving emails, you must set up an email account.
1. From the Home screen, touch
uch .
2. To
3. Enter the recipient email address,email subject, and email content.
Touch to add attachments, such as pictures and audio les.
uch to send the email.
4. To
>
Email
.
.
Enabling Data Services
From the Home screen, touch >
& NETWORKS
select
area, touch
Data enabled
Using data services may incur data trafc charges. To avoid unnecessary charges, deselect
enabled
.
to disable data services.
Using Wi-Fi
From the Home screen, touch >
& NETWORKS
you want to access.
area, select the Wi-Fi. Touch the Wi-Fi network
If you enable Wi-Fi and data services simultaneously, Wi-Fi takes precedence over data services. Data services become available again when your phone is disconnected from a Wi-Fi network.
More...
.In the
Settings
>
Mobile networks
. In the
Settings
WIRELESS
Data
WIRELESS
, and
Camera and Video Recorder
Your phone supports multiple capture modes and picture effects. After pictures are captured, you can view and edit them in the gallery.
From the Home screen, touch >
Music Player
From the Home screen, touch > player. From the media library, select the audio le that you want to play.
uch to activate or deactivate the Dolby Mobile sound
To effect.
.
Camera
On the viewnder screen, slide down to congure the camera settings.
to launch the music
Music+
Security Guard is integrated with your phone to provide security functions, including blocking calls and messages; encrypting messages, calls, and folders. No charges are incurred during the use of this application.
From the Home screen, touch following options:
Blocking logs
been blocked.
Blacklist and whitelist
whitelist. Based on your blocking settings, your phone blocks calls and messages from contacts in the blacklist and accepts calls and messages from contacts in the whitelist.
Privacy center
calls and messages from or to the private contacts.
Password safe
passwords, such as online banking accounts and email accounts.
File encryption
Touch the privacy protection and blocking function.
: Check the calls and text messages that have
: Dene private contacts; view records of
: Record and encrypt your accounts and
: Encrypt and decrypt les.
> Settings >
>Security Guard
: View or edit the blacklist and
Enable service
for the
o enable or disable
t
To install applications:
1. From the Home screen, touch > phone then scans the microSD card and phone memory, and
displays all applications found.
2. Select the application you want to install.
3. To
uch
> Install.
Touch ,then deselect all applications.
Select all
or
Deselect all
AppInstaller
to select or
.The
This device meets guidelines for exposure to radio waves.
ur device is a low-power radio transmitter and receiver.
Yo As recommended by international guidelines, the device is designed not to exceed the limits for exposure to radio waves. These guidelines were developed by the independent scientic organization International Commission on Non-Ionizing Radiation Protection (ICNIRP) and include safety measures designed to ensure safety for all users, regardless of age and health.
The Specic A for the amount of radio frequency energy absorbed by the body when using a device. The SAR value is determined at the highest certied power level in laboratory conditions, but the actual SAR level of the device when being operated can be well below the value. This is because the device is designed to use the minimum power required to reach the network.
The SAR limit adopted by USA kilogram (W/kg) averaged over one gram of tissue. The Highest SAR value reported to the FCC and IC for this device type when tested for use at the ear is 0.963 W/kg, when properly worn on body is 0.969 W/kg, and when using Wi-Fi hotspot function is
0.969 W/Kg.
bsorption Rate (SAR) is the unit of measurement
and Canada is 1.6 watts/
Operating Environment
The device complies with the RF specications when the device is used near your ear or at a distance of 1.5 cm from your body. Ensure that the device accessories such as a device case and a device holster are not composed of metal components. Keep your device 1.5 cm away from your body to meet the requirement earlier mentioned.
Keep the ambient temperature between 0°C the device is being charged. Keep the ambient temperature between 0°C to 40°C for using the device powered by a battery.
Finding the User Guide
For more information about how to use your phone, please read the user guide. Yo site: http://www.huaweidevice.com/worldwide.
u can nd the user guide by visiting the Web
and 40°C while
Loading...