SUN2000-5/8/10KTL-M0
Technical Specification
Technical Specification
SUN2000-5KTL-M0 SUN2000-8KTL-M0 SUN2000-10KTL-M0
Efficiency
Max. efficiency
European weighted efficiency
98.4% 98.6% 98.6%
97.5% 98.0% 98.1%
Input
Max. input voltage
Operating voltage range
Start-up voltage 200 V
Full power MPPT voltage range
Rated input voltage
Max. input current per MPPT
Max. short-circuit current
Number of MPP trackers 2
Max. number of inputs 2
1
2
240 V ~ 850 V 380 V ~ 850 V 470 V ~ 850 V
1,100 V
140 V ~ 980 V
600 V
11 A
15 A
Output
Grid connection
Rated output power
Max. apparent power
Rated output voltage 220 Vac / 380 Vac, 230 Vac / 400 Vac , default 3W / N+PE ; 3W+PE
Rated AC grid frequency 50 Hz / 60 Hz
Max. output current
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤ 3 %
5,000 W 8,000 W 10,000 W
5,500 VA 8,800 VA 11,000 VA
8.5 A 13.5 A 16.9 A
Three-phase
Features & Protections
Input-side disconnection device Yes
Anti-Islanding protection Yes
DC reverse polarity protection Yes
Insulation monitoring Yes
DC surge protection Yes, compatible TYPE II protection class according to EN/IEC 61643-11
AC surge protection Yes, compatible TYPE II protection class according to EN/IEC 61643-11
Residual current monitoring Yes
AC overcurrent protection Yes
AC short-circuit protection Yes
AC overvoltage protection Yes
Ripple receiver control Yes
Arc fault protection (AFCI) Yes
General Data
Operating temperature range -25 ~ + 60 °C (-13 °F ~ 140 °F)
Relative operating humidity 0 %RH~100 %RH
Operating altitude 0 - 4,000 m (13,123 ft.)
Cooling Natural convection
Display LED Indicators; Integrated WLAN + FusionSolar App
Communication
Weight (incl. mounting bracket)
Dimension (incl. mounting bracket)
Degree of protection IP65
Night Time Power Consumption < 5.5 W
RS485; WLAN/Ethernet via Smart Dongle-WLAN-FE;
4G / 3G / 2G via Smart Dongle-4G (Optional)
17 kg (37.5 lb)
525 * 470 * 166 mm (20.7 * 18.5 * 6.5 inch)
Standard Compliance (more available upon request)
Safety EN/IEC 62109-1, EN/IEC 62109-2, IEC62116
Grid connection standards
*1 The maximum input voltage i s the upper limit of the DC voltage. Any higher input DC voltage wou ld probably damage inverter.
*2 Any DC input voltage beyond the operating voltage r ange may result in inverter improper operating.
*
Version No.:01-(20190716)
G98, G99, EN 50438, EN 50549-1. CEI 0-21, VDE-AR-N-4105, AS 4777, C10/11, ABNT, UTE C15-712, RD 1699,
TOR D4, IEC61727, DEWA, MEA(5,10KTL-M0), PEA(5,10KTL-M0)
SOLAR. HUAWEI. COM