Thank you for choosing the HUAWEI MediaPad.
This document is intended for HUAWEI MediaPad that runs EMUI 3.0.5/EMUI 3.1.
Figures in this document are screeshots taken under the Bloom theme. Switch to the Bloom
theme to better understand this guide. For details, see Changing the theme.
Not all models support calling, SMS, and other mobile network related functions.
Certain functions may vary with models and regions.
1
Page 6
2 Getting started
Locking and unlocking the screen
Locking the screen: If your HUAWEI MediaPad has been idle for a specified period of
time, the screen locks itself automatically. You can also press the power button to lock
the screen.
On the home screen, touch Settings > Display > Sleep and choose a time.
Unlocking the screen: Press the power button to turn on the screen. Slide your finger
toward any direction to unlock the screen.
Notification and status icons
The notification and status bars may display the following icons to inform you of your
HUAWEI MediaPad's status.
Airplane mode
GPS in use
Battery full
New email
SIM card not inserted
Upcoming event
Uploading or sending files
Memory full
Synchronizing data
Connected to a VPN
Wi-Fi networks available
USB debugging on
Bluetooth on
Charging
Battery extremely low
Wi-Fi hotspot on
Preparing the microSD card
Alarms enabled
Downloading or receiving files
System exception
Synchronization failed
USB tethering on
Connected to a Wi-Fi network
Headset connected
Common keys
More
Completed
Share
Add
2
Page 7
Search
Refresh
Favorites
Delete data
Save
Call
Home screen operations
To open an application: On the home screen, touch the application.
To switch between the home screen and its extensions: On the home screen, flick your
finger left or right.
Personalizing the home screen: Touch and hold a blank area on the home screen or
pinch two fingers together to set the wallpaper, widgets, and more.
On the home screen, pinch three fingers together to display the home screen
thumbnails, where you will be able to manage your home screens. For details, see
Managing home screens.
3
Page 8
Opening the notification and shortcut panels: Slide down from the status bar to open
the notification panel. Flick left or right to switch between the notifications and
shortcuts tabs.
Touch a notification to view its details and flick left or right across a
notification to dismiss it.
Touch
Drag the slider to adjust the screen brightness.
You can also enable or disable automatic brightness. (Applicable to
selected models)
to delete all notifications.
4
Page 9
Touch the shortcut switches on the notification panel to turn on or off
the functions. Touch and hold a switch to enter the settings screen of
the corresponding function.
Slide down the shortcut switches, you can then touch Edit
to customize the list.
3 Text input
Your HUAWEI MediaPad comes with multiple input methods. You can quickly enter text
using the onscreen keyboard.
Touch a text input field to bring up the onscreen keyboard.
When you are done, touch to hide the onscreen keyboard.
Editing Text
You can copy, cut, and paste text.
Select text: Touch and hold the text field until and appear. Drag
and
Copy text: After selecting text, touch Copy.
Cut text: After selecting text, touch Cut.
Paste text: Touch where you want to insert the text (to move the insertion point, drag
Selecting an input method
to select the text you want to edit, or touch Select all to select all text.
) and touch Paste to paste the text you copied or cut.
The HUAWEI MediaPad provides multiple ways to text input. You can select the input
method you like.
1. On the text editing screen, touch a text field to bring up the onscreen keyboard.
2. Flick down from the notification bar to display the notification panel.
3. On the notification panel, touch Change keyboard.
4. On the displayed option menu, select the desired input method.
5
Page 10
4 Network connection
Connecting to a Wi-Fi network
When both a Wi-Fi network and a mobile network are available simultaneously, the
HUAWEI MediaPad connects to the Wi-Fi network by default. If the Wi-Fi network
disconnects, the HUAWEI MediaPad then automatically connects to the mobile network.
1. On the home screen, touch Settings > Wi-Fi.
2. Toggle the switch of Wi-Fi to
for available Wi-Fi networks.
3. Select the desired Wi-Fi network and follow the onscreen instructions.
To connect to a Wi-Fi network that has a hidden SSID, touch Add network under the WiFi network list, and then follow the onscreen instructions to enter the required information
and connect to that network.
Your HUAWEI MediaPad consumes more power when Wi-Fi is turned on. To save battery
power, turn off Wi-Fi when it is not in use.
Connecting to a Wi-Fi network using WPS
If the wireless router being used supports the Wi-Fi protected setup (WPS) function, you
can quickly connect to a Wi-Fi network using WPS.
to turn on Wi-Fi. Your HUAWEI MediaPad then scans
1. On the home screen, touch
2. Toggle the switch of Wi-Fi to
3. Touch
follow the onscreen instructions for operations to perform on the wireless router.
> Advanced settings > WPS connection or WPS PIN connection, and
Settings > Wi-Fi.
to turn on Wi-Fi.
Turning on your mobile data connection
(Applicable to selected models)
Using mobile data services may incur data usage charges. For details, contact your service
provider.
1. On the home screen, touch
2. Touch More > Mobile network under Wireless & networks.
3. Touch the key next to Data enabled or drag the key to
Settings.
to enable the data service.
6
Page 11
5 Network sharing
You can use various methods to share your HUAWEI MediaPad's data connection with
other wireless devices.
Sharing your data connection using a Wi-Fi
hotspot (Applicable to selected models)
By setting up your HUAWEI MediaPad as a Wi-Fi hotspot, you can share your mobile
network with other devices.
Before sharing your data connection, turn on mobile data on your HUAWEI MediaPad. For
details, see Turning on your mobile data connection (Applicable to selected models).
When other devices access the Internet using your HUAWEI MediaPad's data connection,
the data usage of your HUAWEI MediaPad will be consumed.
1. On the home screen, touch
2. Under Wireless & networks, touch More > Tethering & portable hotspot.
3. Touch Portable Wi-Fi hotspot.
4. Toggle the switch to
5. Touch Configure Wi-Fi hotspot and follow the onscreen instructions to set the required
information, such as your Wi-Fi network name and password.
Once the Wi-Fi hotspot settings are complete, other Wi-Fi enabled devices can search for
and connect to the Wi-Fi hotspot provided by your HUAWEI MediaPad.
Settings.
to turn on your Wi-Fi hotspot.
Sharing your data connection through USB
tethering
You can share your HUAWEI MediaPad's network with a computer using a single USB
cable.
1. Connect your HUAWEI MediaPad to a computer using the USB cable provided with the
HUAWEI MediaPad.
2. On the home screen, touch
3. Under Wireless & networks, touch More > Tethering & portable hotspot.
4. Touch USB tethering to share your mobile data connection.
After the connection is set up, you can access the Internet from the computer.
When using the USB tethering function, you cannot simultaneously use your HUAWEI
MediaPad as a USB storage device.
Settings.
7
Page 12
Sharing your data connection through Bluetooth
tethering (Applicable to selected models)
With Bluetooth tethering, you can share your HUAWEI MediaPad's data connection with
other Bluetooth devices.
1. On the home screen, touch
2. Under Wireless & networks, touch More > Tethering & portable hotspot.
3. Touch Bluetooth tethering to turn on Bluetooth tethering.
4. Enable Bluetooth on the other device and pair your HUAWEI MediaPad with it.
Settings.
8
Page 13
6 Contacts
ontacts are stored
Creating a contact
1. On the home screen, touch Contacts to display your contacts list.
2. Touch
3. Enter the related information, such as the contact's name, phone number, and email
address.
4. Touch Add another field to add more information.
5. Touch
Synchronizing contacts
You can synchronize the contacts stored in your Gmail and Exchange accounts to your
HUAWEI MediaPad and vice versa.
.
If you are creating contacts for the first time, your HUAWEI MediaPad prompts you to
select a storage location. When you create contacts next time, the new c
in the same storage location by default. In addition, the storage location is displayed on
the new contacts screen, and you can
.
touch the storage location to select a new one.
1. On the home screen, touch
2. Under Accounts, touch the type of account you want to synchronize.
3. Touch the account you want to synchronize.
4. Toggle the Sync contacts switch to
If the account you want to synchronize has not been added to your HUAWEI MediaPad,
touch Add account and follow the onscreen instructions to add the account. When it is
added, your HUAWEI MediaPad automatically synchronizes with it.
Settings.
.
Importing contacts
You can import contacts from a micro-SIM or microSD card to your HUAWEI MediaPad, or
use Wi-Fi Direct to import the contacts from other devices to your HUAWEI MediaPad.
1. On the home screen, touch
2. Touch
3. Select an import method and follow the onscreen instructions.
> Import/Export.
Contacts to display your contacts list.
9
Page 14
Backing up contacts
You can back up your contacts to a microSD card in case your contacts are accidentally
deleted or lost.
1. On the home screen, touch
2. Touch
3. Touch Export to storage.
> Import/Export.
Contacts to display your contacts list.
Sharing contacts
You can share contacts in your HUAWEI MediaPad with your friends using email, Bluetooth,
and more.
1. On the home screen, touch
2. From the contacts list, you can:
Touch the contact you want to share, and then touch .
Touch > Import/Export > Share contacts, select the contacts you want to share,
and touch
3. In the displayed dialog box, choose a sharing mode and follow the onscreen instructions
to share the contacts.
.
Contacts.
10
Page 15
7 Calls (Applicable to selected
models)
Making an emergency call
In the event of an emergency, you can make emergency calls without a SIM card. However,
you must still be within the coverage area.
1. On the home screen, touch
2. Enter a local emergency number and touch
Emergency calls are subject to the quality of the cellular network, use environment,
service provider policies, and local laws and regulations. Never rely solely on your
HUAWEI MediaPad for critical communications when emergencies occur.
Dialer.
.
Making a conference call
Making conference calls with your friends, family, and co-workers is easy with your
HUAWEI MediaPad.
Before you make a conference call, be sure you have subscribed to the conference call
service. For details, contact your service provider.
1. Call the first participant.
2. When the call is connected, touch
with the first participant is put on hold.
3. When the second call is connected, touch
4. To add more participants, repeat steps 2 and 3.
When the call is complete, touch
> and call the second participant. The call
to start a conference call.
to end it.
Adding an unknown number to your contacts
1. On the home screen, touch Dialer.
2. From the call log, touch
3. Touch
or .
You can also touch and hold the number you want to add, and then touch Create new contact or Save to existing contact.
next to the unknown number.
Clearing call logs
To delete a single call log entry: On the Dialer screen, touch and hold the call log entry. On
the displayed option menu, touch Delete entry.
11
Page 16
To delete all or multiple call log entries: On the Dialer screen, touch
log.
Select the Select all check box and touch to delete all call log entries.
Select one or more call logs and touch to delete them.
> Delete call
Enabling pocket mode (Applicable to selected
models)
Worried about missing important calls when your HUAWEI MediaPad is in your pocket?
Pocket mode can help you out by increasing the ringtone volume and vibration intensity of
incoming calls over time.
1. On the home screen, touch
2. Under Dialer, touch
3. Toggle the switch next to Pocket mode to turn on pocket mode.
Dialer.
> Call settings.
12
Page 17
8 Messaging (Applicable to
selected models)
Searching for a message
If you are having trouble finding a specific message in a pile of messages, this function can
come to your rescue.
1. On the home screen, touch
2. Enter a keyword in the search box.
3. Touch Search.
4. In the results list, select the desired message to open it.
Messaging.
Customizing message settings
To customize text and multimedia message settings, message notification tones, and more,
from the message list, touch
> Settings.
13
Page 18
9 Managing applications
may not run properly and your HUAWEI MediaPad may shut down. It is recommended that
Installing an application
When you install an application, the "Install blocked" message may be displayed. Read
the message carefully. If you want to continue with the installation, follow the onscreen
instructions.
You can obtain and install an application using any of the following methods:
Download it from an online app store or by using a browser. After the application is
downloaded, follow the onscreen instructions to install it.
Some third-party applications may not be compatible with your HUAWEI MediaPad. They
you download applications from trusted sources only.
Connect your HUAWEI MediaPad to a computer. Then use the HiSuite or third-party
software to download the application. After the application is downloaded, follow the
onscreen instructions to install it.
Use Bluetooth or Wi-Fi Direct to send the application on another device, such as a
phone or tablet, to your HUAWEI MediaPad. After the transmission is complete, click
the application to install it.
Download the application from a computer. Then copy the application to your HUAWEI
MediaPad. Once copied, touch
Select the application and touch Applications > Apps under Categories,select and
follow the onscreen instructions to install it.
Files on your HUAWEI MediaPad's home screen.
Uninstalling and sharing an application
On the home screen, touch and hold the application you want to uninstall or share.
Drag it to to uninstall the application.
Drag it to to share the application.
Some pre-installed applications cannot be uninstalled.
14
Page 19
10 Multimedia
Taking an all-focus photo
In all-focus mode, you can change the focal point of a photo after it's been taken.
1. On the home screen, touch
2. Touch
3. Touch
4. Go to Gallery and select the photo that was taken in all-focus mode.
5. Touch
6. Touch an area of the photo to change the focal point to that location.
7. Touch
> All-focus to switch to all-focus mode.
to take a photo.
indicates photos taken in all-focus mode.
to enter all-focus editing mode.
.
Camera.
Taking a panoramic photo (Applicable to
selected models)
Your HUAWEI MediaPad enables you to easily take panoramic photos without a wide-angle
lens.
1. On the home screen, touch
2. Touch
3. Touch
4. Follow the onscreen instructions and move your device slowly in one direction.
5. Touch
to create one panoramic photo.
> Panorama to switch to panorama mode.
to start shooting.
to stop shooting. The camera automatically merges all the photos captured
Camera.
Importing photos (Applicable to selected models)
You can import photos from a camera or other storage device (such as a USB flash drive or
phone) to your HUAWEI MediaPad using only a USB OTG cable.
To purchase a USB OTG cable, please contact an Huawei authorized supplier or your
device vendor.
Use a USB OTG cable to connect a camera and your HUAWEI MediaPad.
15
Page 20
1. On your HUAWEI MediaPad's home screen, touch
2. Touch
MediaPad.
3. Touch Copy or Cut.
4. Choose where you want to save the files and touch Paste.
or ,select the photos or folders you want to import into your HUAWEI
Files > Local > USB.
Viewing photos or videos
Gallery enables you to conveniently view photos and videos. It automatically searches and
organizes photos and videos stored on your HUAWEI MediaPad's internal storage and the
microSD card for your easy reference.
1. On the home screen, touch
2. Touch a photo or video to view it in full screen mode. Flick your finger left or right across
the screen to view the previous or next file.
You can pinch two fingers apart or together to zoom in or out.
Gallery to open Gallery.
Sharing photos or videos
You can share photos and videos via Bluetooth or email. Take your HUAWEI MediaPad and
start sharing!
1. On the home screen, touch
2. Touch and hold the photo, video you want to share .
3. Touch
Bluetooth or Wi-Fi Direct. Then follow the onscreen instructions. For details, see File
sharing.
and choose how you want to share the selected file, for example, using
Gallery to open Gallery.
16
Page 21
Scanning a QR code using the camera
(Applicable to selected models)
1. On the home screen, touch Camera.
2. Frame the QR code with the camera.
3. After the QR code is successfully scanned, touch View details.
Scanning a QR code using Gallery (Applicable to
selected models)
1. On the home screen, touch Gallery.
2. Choose a QR code photo.
3. Touch the photo.
4. Touch View details.
17
Page 22
11 Customized settings
Changing the theme
Your HUAWEI MediaPad comes with multiple themes, easily allowing your device to have a
new look as often as you want.
1. On the home screen, touch
2. Flick left or right to browse different local and online themes. (Applicable to selected
models)
3.Select the desired theme. Then, touch
Themes.
.
Adding a widget to the home screen
You can add widgets, such as the calendar and bookmarks, to the home screen.
1. On the home screen, touch and hold a blank area.
2. Touch Widgets.
3. Drag a widget to the home screen and release your finger.
18
Page 23
Managing home screens
On the home screen, pinch three fingers together to display the home screen thumbnails.
Setting the default home screen: Touch at the bottom of the screen and select
the current home screen as the default home screen.
Moving a home screen: Touch and hold the home screen until your device vibrates,
drag the home screens to adjust their positions.
Adding a home screen: Touch to add a home screen.
Deleting a home screen: Touch to delete a blank home screen.
Setting the ringtone
1. On the home screen, touch Settings > Sound.
2. Select the desired ringtone type.
3. Follow the onscreen instructions to select your favorite music or recording as the
ringtone.
19
Page 24
Setting the font size
You can also open the notification panel and quickly adjust the screen brightness using the
1. On the home screen, touch Settings > Display.
2. Touch Font size.
3. Select the desired font size.
Adjusting the screen brightness
1. On the home screen, touch Settings > Display > Brightness.
2. In the displayed dialog box, perform either of the following operations:
Select the Automatic brightness check box to let your device automatically adjust the
screen brightness based on the ambient light. (Applicable to selected models)
Drag the slider left or right to manually adjust the screen brightness.
shortcut switch.
Setting the file safe
The file safe helps you keep your important files private and protected.
1. On the home screen, touch
2. Under Categories or Local, touch Safe.
3. Touch Enable.
4. Follow the onscreen instructions to set up your safe password and security question,
and then touch Done.
5. Touch Add.
6. Follow the onscreen instructions and select the files you want to add to the safe.
7. Touch ADD to add the files to the safe.
Enter the file safe, touch Settings > Destroy safe, and follow the onscreen instructions to
destroy the safe. To remove any files before destroying the safe, select Remove files.
Files.
Setting privacy protection (Applicable to
selected models)
If you have private data in your device that you wish to keep hidden from others, you can
enable privacy protection and set two different passwords, one for yourself and one for
guests. Content that you set as private will be hidden from people logged in with the guest
password.
1. On the home screen, touch
2. Touch Privacy protection > Let's start.
3. Select a password format.
4. Follow the onscreen instructions and enter your owner password and guest password.
Settings > Security.
20
Page 25
5.Under Set private data, set your private contacts, albums, and applications.
Privacy
To disable privacy protection, unlock your HUAWEI MediaPad using the owner password.
Enter the Privacy protection screen, enter the owner password, and then disable
protection. After privacy protection is disabled, your owner password will function as the
screen unlock password and the guest password will become invalid.
21
Page 26
12 File sharing
Fi Direct turned on, you can directly share files between them without pairing
Sharing files using Wi-Fi Direct
Wi-Fi Direct is a function to connect wireless devices using a Wi-Fi network. After wireless
devices are connected, they can quickly share files among them.
1. On the home screen, touch
2. Touch the key next to Wi-Fi or drag the key to
3. Touch
4. Select the device to pair it with your HUAWEI MediaPad.
5. On your HUAWEI MediaPad, touch and hold the file you want to share. On the displayed
6. On the displayed option menu, select the desired device, and lastly, touch the key on the
. On the receiving device, turn on Wi-Fi Direct. Your HUAWEI MediaPad then
automatically searches for available devices.
option menu, touch Share > Wi-Fi Direct.
device to receive the file.
If your HUAWEI MediaPad and the device have connected to the same Wi-Fi network and
both have Withem.
Settings > Wi-Fi.
to turn on Wi-Fi.
Sharing files using Bluetooth
1. On the home screen, touch Settings > Bluetooth.
2. Touch the key next to Bluetooth or drag the key to
3. Select the device to pair your HUAWEI MediaPad and the device.
4. On your HUAWEI MediaPad, touch and hold the file you want to share. On the displayed
option menu, touch Share > Bluetooth.
5. On the displayed option menu, select the desired device. On the device, touch the
related key to receive the file.
to turn on Bluetooth.
Multi-screen display (Applicable to selected
models)
You can push photos, videos, or games on your HUAWEI MediaPad to a large screen,
such as a TV, to view them more conveniently. If your TV supports HDMI and a resolution
of 720p or above, you can use it with a HUAWEI MediaQ for multi-screen display.
1. Use an HDMI cable to connect the HUAWEI MediaQ to the TV.
2. Power on the HUAWEI MediaQ and TV, and switch the TV to HDMI input. The main
interface of the HUAWEI MediaQ is then displayed on the TV.
3. Connect your HUAWEI MediaPad to the same Wi-Fi network as the HUAWEI MediaQ in
either of the following ways:
Connect your HUAWEI MediaPad to the Wi-Fi network set up by the HUAWEI MediaQ.
22
Page 27
You can find the Wi-Fi network name and password of the HUAWEI MediaQ in the
upper left corner of the TV.
Connect your HUAWEI MediaPad and HUAWEI MediaQ to your home Wi-Fi network.
23
Page 28
4. On the home screen of your HUAWEI MediaPad, flick down from the status bar to open
the notification panel.
5. Open your notification panel. Under Shortcuts, touch
and start the multi-screen display.
For more details, see the HUAWEI MediaQ User Guide.
, select the receiving device,
Copying files from a computer
Use a USB cable to connect your HUAWEI MediaPad to a computer. Flick down from the
status bar to open the notification panel.Follow your HUAWEI MediaPad's onscreen
instructions to select a connection method. You can then transfer files between your
HUAWEI MediaPad and the computer.
Connection
Mode
Photos On the computer, view and
Files On the computer, view and
USB drive On the computer, view and
Function Operation
manage the image files stored
on your HUAWEI MediaPad.
manage the files stored on your
HUAWEI MediaPad and the
microSD card.
Using Windows Media Player
11 or a later version in the
computer, view and manage
the multimedia files stored on
your HUAWEI MediaPad and
the microSD card..
manage the files stored on the
microSD card.
This method is available only
when your HUAWEI MediaPad
has a microSD card inserted.
Click the newly displayed drive
letter on the computer. Then
transfer image files between
your HUAWEI MediaPad and
the computer.
Click the newly displayed drive
letter on the computer. Then
transfer files between your
HUAWEI MediaPad and the
computer.
Start Windows Media Player on
the computer. Follow the
onscreen instructions to transfer
multimedia files between your
HUAWEI MediaPad and the
computer.
Click the newly displayed drive
letter on the computer. Then
transfer files between the microSD
card and the computer.
24
Page 29
13 Settings
Motion control (Applicable to selected models)
Motion control lets you control your HUAWEI MediaPad using simple motions. For example,
mute the phone or answer and make calls quickly.
1. On the home screen, touch
2. Touch Motion control.
3. On the Motion control screen, select an option, and select a motion to enable it.
Settings.
Setting the screen timeout period
You can set a screen timeout period so your HUAWEI MediaPad automatically turn offs the
screen to save power.
1. On the home screen, touch
2. Choose a timeout period.
Settings > Display > Sleep.
Setting a screen lock
1. On the home screen, touch Settings > Screen lock & passwords.
2. Follow the onscreen instructions to set the screen lock.
With a screen lock set, if your HUAWEI MediaPad is idle for a specified period of time, it
automatically locks its screen. You can also touch the power key to lock the screen.
Adjusting the volume
You can set the volume for the ringtone, media, alarms, and notifications.
1. On the home screen, touch
2. Drag the sliders left or right to adjust the volume.
You can also use the volume keys to adjust the volume of running applications.
Settings > Sound > Volume.
Enabling power saving mode
1. On the home screen, touch Settings > Power saving.
2. Select a power saving mode.
25
Page 30
Checking the memory status
date and time information from the network and updates them according to your time zone
Before moving a large file to your HUAWEI MediaPad's internal storage or the microSD
card, check the available storage space that has left on it.
1. On the home screen, touch
2. Touch Storage to view memory information.
Settings.
Setting the date and time
1. On the home screen, touch Settings > Date & time.
2. Deselect the Automatic date & time check box.
3. Follow the onscreen instructions to set the date and time.
If your HUAWEI MediaPad is set to automatically update the date and time, it obtains the
In this case, you cannot manually change the time zone, date, or time displayed on your
HUAWEI MediaPad.
Formatting a microSD card
Back up important data before you format a microSD card.
1. On the home screen, touch
2. Touch Storage > My SD card > Erase SD card.
Settings.
Restoring factory settings
Restoring your HUAWEI MediaPad to its factory settings erases all your personal data,
including information about your accounts, your system and application settings, and your
installed applications. Before restoring factory settings, back up the important data on your
HUAWEI MediaPad.
1. On the home screen, touch Settings > Backup & reset.
2. Touch Factory data reset and follow the onscreen instructions to back up data or
directly restore factory settings.
Updating your HUAWEI MediaPad
Updating your HUAWEI MediaPad may clear all the data in it. Back up important data
before updating your HUAWEI MediaPad.
If you use unauthorized software to update the system, a update failure may occur or
your personal information may be leaked. Update your HUAWEI MediaPad online or by
using authorized software.
26
Page 31
1. On the home screen, touch Tools >
information.
2. Touch Check for updates. If a new version is available, follow the onscreen instructions
to update online. You can also choose
a local update package.
To update using a local update package, refer to the update guide included in the package.
System Update to view the system
> Local update to update the system using
27
Page 32
14 Personal Information and Data
Security
The use of some functions or third-party applications on your device could result in your
personal information and data being lost or becoming accessible to others. Several
measures are recommended to help you protect personal and confidential information.
Place your device in a safe area to prevent it from unauthorized use.
Set your device screen to lock and create a password or unlock pattern to open it.
Periodically back up personal information kept on your memory card, or stored in your
device memory. If you change to a different device, be sure to move or delete any
personal information on your old device.
If you are worried about viruses when you receive messages or emails from a stranger,
you can delete them without opening them.
If you use your device to browse the Internet, avoid websites that might pose a security
risk to avoid theft of your personal information.
If you use services such as Wi-Fi or Bluetooth, set passwords for these services to
prevent unauthorized access. When these services are not in use, turn them off.
Install or upgrade device security software and regularly scan for viruses.
Be sure to obtain third-party applications from a legitimate source. Downloaded third-
party applications should be scanned for viruses.
Install security software or patches released by Huawei or third-party application
providers.
Some applications require and transmit location information. As a result, a third-party
may be able to share your location information.
Your device may provide detection and diagnostic information to third-party application
providers. Third party vendors use this information to improve their products and
services.
If you have concerns about the security of your personal information and data, please
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei").
The product described in this manual may include copyrighted software of Huawei and
possible licensors. Customers shall not in any manner reproduce, distribute, modify,
decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense
the said software, unless such restrictions are prohibited by applicable laws or such actions
are approved by respective copyright holders.
Trademarks and Permissions
, , and are trademarks or registered trademarks of Huawei
Technologies Co., Ltd.
Android™ is a trademark of Google Inc.
LTE is a trade mark of ETSI.
The Bluetooth
Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license.
Other trademarks, product, service and company names mentioned may be the property of
their respective owners.
Notice
Some features of the product and its accessories described herein rely on the software
installed, capacities and settings of local network, and therefore may not be activated or
may be limited by local network operators or network service providers.
Thus, the descriptions herein may not exactly match the product or its accessories which
you purchase.
Huawei reserves the right to change or modify any information or specifications contained
in this manual without prior notice and without any liability.
Third-Party Software Statement
Huawei does not own the intellectual property of the third-party software and applications
that are delivered with this product. Therefore, Huawei will not provide any warranty of any
kind for third party software and applications. Neither will Huawei provide support to
customers who use third-party software and applications, nor be responsible or liable for
the functions or performance of third-party software and applications.
Third-party software and applications services may be interrupted or terminated at any time,
and Huawei does not guarantee the availability of any content or service. Third-party
service providers provide content and services through network or transmission tools
outside of the control of Huawei. To the greatest extent permitted by applicable law, it is
explicitly stated that Huawei shall not compensate or be liable for services provided by
third-party service providers, or the interruption or termination of third-party contents or
services.
Huawei shall not be responsible for the legality, quality, or any other aspects of any
software installed on this product, or for any uploaded or downloaded third-party works in
any form, including but not limited to texts, images, videos, or software etc. Customers shall
bear the risk for any and all effects, including incompatibility between the software and this
product, which result from installing software or uploading or downloading the third-party
works.
®
word mark and logos are registered trademarks owned by Bluetooth SIG,
29
Page 34
This product is based on the open-source Android™ platform. Huawei has made necessary
changes to the platform. Therefore, this product may not support all the functions that are
supported by the standard Android platform or may be incompatible with third-party
software. Huawei does not provide any warranty or representation in connect with any such
compatibility and expressly excludes all liability in connection with such matters.
DISCLAIMER
ALL CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED
BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN
RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS, BUSINESS, REVENUE, DATA,
GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS OF WHETHER SUCH
LOSSES ARE FORSEEABLE OR NOT.
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR
PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A
LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN
THIS MANUAL SHALL BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE
PURCHASE OF THIS PRODUCT.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and be
responsible to obtain all necessary governmental permits and licenses in order to export,
re-export or import the product mentioned in this manual including the software and
technical data therein.
Privacy Policy
To better understand how we protect your personal information, please see the privacy
policy at http://consumer.huawei.com/privacy-policy.
903416_01
30
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.