Huawei LS1015 User Manual
Smart Home Gateway EchoLife
LS1015
Quick Start
Safety Precautions
To use the device properly and safely, read the safety precautions carefully before using the device
and strictly observe these precautions when using the device.
Safety precautions:
Keep the device out of the reach of children as the components or accessories may be
swallowed.
The power supply voltage of the device must meet the requirements on the input voltage of the
device.
Do not use any power adapters that are not in the standard configuration. Otherwise, the
device may be abnormal or unsafe.
If the power adapter is damaged and its internal circuit is exposed due to man-made factors,
do not touch the exposed circuit, which may bring safety risks.
Prevent objects, such as metal, from entering the device through the heat dissipation hole.
Dry your hands before connecting or disconnecting cables. Stop the device and switch off the
power before connecting or disconnecting cables.
Switch off the power and disconnect all cables, including the power cable, and network cable,
during periods of lightning activities. The socket-outlet shall be installed near the power adapter
and shall be easily accessible. Before use the power adapter, please check no damage on the
adapter.
Do not install telephone lines, network cables, power adapters or power adapter cables
outdoors. Adopting these measures will help prevent device damage and bodily injuries which
are especially prone during thunderstorms.
Install the device according to the requirements of the manufacturer. To be specic, reserve
at least 10 cm for heat dissipation at the top and four sides of the device, keep the device
away from ammable objects, highly magnetic or electric devices, such as microwave ovens,
refrigerators, and mobile phones.
Do not place any object on the device, so that the device will not be damaged due to
overheating or deformation.
If an abnormality occurs, for example, liquid entering the device, smoke, unusual sound, and
smell, stop the device immediately, switch off the power, disconnect all cables (such as the
power cable, and network cable) to the device, and contact the authorized service center.
Do not disassemble the device without permission. In the case of a device fault, contact the
authorized service center.
Dispose of the packing materials, expired batteries, and old or abandoned devices in
accordance to local laws and regulations (recycling them is strongly recommended).
Do not change the structure, safety design, or performance design of the device without prior
authorization.
Fireproof precautions:
Keep the device away from large heat source equipment, bare flames, and high-power
devices, such as electric heaters, candles, and blow drier, to eliminate safety risks.
If there are aged cables or power socket facilities on the power supply line to or near the
device, replace them in time to eliminate safety risks. The power supply voltage of the device
must meet the input voltage requirement.
1
Getting to Know Your Smart Home Gateway
Smart Home Gateway EchoLife
Power supply
Power adapter input 100-240V AC, 50-60 Hz
Wi-Fi standard IEEE 802.11b/g/n
Internet of Things (IoT)
wireless standard
Ambient temperature 0ºC~+40ºC
Ambient humidity 5%~95% RH(non-condensing)
Dimensions(WxDxH) (127 x106 x 34) mm
See the nameplate on the
device
Z-Wave
LS1015
2
Quick Installation
Hardware Connection
Power socket
ONT, xDSL Modem or other network device
Step 1 Use a network cable to connect the Internet port to ONT, xDSL
Modem or other network device.
Step 2 Use a power adapter to connect the Power port to the power
socket.
3
NOTE
Port Description
Port Name Description
Power
LAN LAN port used for new functions in the future.
Internet
USB USB 2.0 port used for new functions in the future.
Use the power adapter in the packing case. Otherwise, the Smart Home
Gateway EchoLife LS1015 may be damaged.
Connects to the power source to supply power to the
Smart Home Gateway EchoLife LS1015.
To be connected to the LAN port of the ONT, xDSL
Modem or other network device.
The product image in this manual is for reference only. The actual product is the
standard.
4
Loading...