No part of this document may be reproduced or transmitted in any
form or by any means without prior written consent of Huawei
Technologies Co., Ltd.
The product described in this manual may include copyrighted
software of Huawei Technologies Co., Ltd and possible licensors.
Customers shall not in any manner reproduce, distribute, modify,
decompile, disassemble, decrypt, extract, reverse engineer, lease,
assign, or sublicense the said software, unless such restrictions are
prohibited by applicable laws or such actions are approved by
respective copyright holders under licenses.
Trademarks and Permissions
, , and are trademarks or
registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned
are the property of their respective owners.
Notice
Some features of the product and its accessories described herein rely
on the software installed, capacities and settings of the local network,
and may not be activated or may be limited by local network
operators or network service providers. Thus, the descriptions herein
may not exactly match the product or its accessories you purchase.
Huawei Technologies Co., Ltd. reserves the right to change or
modify any information or specifications contained in this manual
without prior notice or obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”.
EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO
WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE
ACCURACY, RELIABILITY OR CONTENTS OF THIS
MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE
LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD
BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and
regulations and will obtain all necessary governmental permits and
licenses in order to export, re-export or import the product mentioned
in this manual including the software and technical data therein.
Contents
1 Getting to Know Your Phone........................................................1
Your Phone...............................................................................1
Keys and Functions ..................................................................2
Using a Bluetooth Headset .....................................................26
16 Warnings and Precautions........................................................28
ii
1 Getting to Know Your Phone
Your Phone
The following figure shows the appearance of your phone and it is
for your reference only.
1 Screen 6 Send key
2 Earpiece 7
3 Camera 8 Shortcut button for the camera
4 Volume/Scroll key 9 Power key
5 End key
If an accessory of the phone is not included in the packing
box, it might be provided as a giveaway or you need to
purchase it separately.
Charger/Universal serial bus
(USB)/Headset jack
1
Keys and Functions
Press ... To …
z
Make a call
z
Answer an incoming call.
z
View call logs in standby mode.
z
End a call.
z
Return to the standby mode.
z
Turn off the background music in standby mode (by
pressing it).
z
Power on or power off the phone (by pressing and
holding the key for about 3s).
z
Lock the keypad by pressing the key for about 1
second.
z
Access the camera screen.
z
Scroll up and down the submenus on a menu screen
or the options on an option screen.
z
Adjust the volume in standby mode, during a call,
during music playing, or during FM radio listening.
2
Screen Icons
Icon Indicates …
Signal strength and line.
The keypad is locked.
The keypad is unlocked
A new short message is received.
Alarms.
Headset profile.
Battery power level. The current battery power is full.
The
The
The
The
The
The Bluetooth function is enabled.
profile is activated.
General
profile is activated.
Silent
profile is activated.
Meeting
profile is activated.
Outdoor
My profile
profile is activated.
3
2 Installation and Charging
Installation
Removing the Back Cover
Installing the SIM Card
When installing the subscriber identity module (SIM) card, ensure
that the golden contact area on the SIM card is facing downward and
that the beveled edge of the SIM card is properly aligned with that of
the SIM card slot.
Your phone may support two SIM cards. In this case, you can
insert two SIM cards into the phone at one time, and select Dual SIM open to enable the dual-SIM mode.
4
Installing a microSD Card
Your phone supports a microSD card with a capacity of up to 16 GB.
The following figure shows the installation of the microSD card.
If no microSD card is included in the packing box, a microSD
card might be provided as a giveaway or you need to purchase
a microSD card separately.
Installing the Battery
Charging the Battery
Connect the charger to the charger jack on the phone.
Connect the charger to a power socket.
The charging starts, with the charging icon displayed in an animated
state.
5
If the battery power is exhausted when you charge the
battery, the charging icon might appear on the screen a few
m
inutes after the charger is connected to the power socket.
hen the charging icon becomes static, indicating that the battery is
W
harged, disconnect the charger from the power socket.
fully c
nect the charger from the phone.
Discon
Getting Started
3
Using the Stylus
Your phone uses a touchscreen.
You can perform various
tapping and dragging.
z
Tap: You can use the stylus tip to touch the sc
a menu or select an item.
z
Drag: You can use the s
main menu or on the widget bar, and then move the icon. You can
also use the stylus tip to to
through a menu or a Wireless Application Protocol (WAP) page
You can use the stylus tip to touch
ation or edit text. the screen to perform an o
per
operations and settings on the phone by
reen once to access
tylus tip to tap and hold an icon in the
uch and move on the screen to scroll
Using the Widget Bar
.
In standby mode, tap to displa
Drag a widget from the widget ba
the corresponding operation directly.
y the widget bar.
r to the desktop, and then perform
6
Calibrating the Screen
The phone responds to the touch of the stylus tip on the screen
accurately after screen calibration.
In standby mode, select Menu > Settings > Pen calibration.
Use the stylus tip to tap the cross marks that appear on the screen in
sequence as prompted to complete screen calibration.
During the calibration, tap the center of each cross mark
accurately to ensure that the phone can respond to your tap
and text entry on the screen correctly after the calibration.
USB
When the phone is connected to a PC through a USB cable, the
following options are displayed on the phone screen: Mass storage.
When you select Mass storage, you can read the files stored on the
phone and the microSD card.
Phone Lock
The phone lock protects your phone from unauthorized use. Typically,
the phone lock code is provided with the phone. The preset phone
lock code is 1234. If the phone lock is enabled, when you power on
the phone, you are prompted to enter the phone lock code.
Do remember your phone lock code. If you forget it, contact the
service center.
PIN and PUK
The personal identification number (PIN) protects your SIM card
from unauthorized use. The PIN unblocking key (PUK) is used to
unlock the blocked PIN. Both the PIN and the PUK are provided
with the SIM card. For details, contact your service provider.
7
If you enter wrong PINs thrice consecutively, the phone prompts you
to enter the PUK.
If you enter wrong PUKs ten times consecutively, the SIM card
becomes permanently invalid. In this case, contact your service
provider for a new SIM card.
Locking the Screen and the Keypad
To set the phone to automatically lock the screen and the keypad
when the phone is in standby mode for a specific period, select
Menu > Settings > Security setup > Auto keypad lock, and then on
the Auto keypad lock screen, select a period (None, 5 sec, 30 sec, 1 min, or 5 min).
To unlock the screen and the keypad, press and slide
screen.
on the
Changing the Wallpaper
To change the wallpaper, do as follows:
Select Menu > Settings > Phone settings > Display > Wallpaper.
Select a picture.
You can select a picture preset in the system, saved in the phone
memory, or saved on the microSD card.
Press OK to set the picture as the wallpaper.
Entertainment
z
Games: to provide games.
z
Media player: to play the video files stored on the phone or the
microSD card.
z
Camera: to take pictures.
z
Image viewer: to view images.
z
Video recorder: to record video files.
z
Photo editor: to edit photos.
8
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.