registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names
mentioned are the property of their respective owners.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”.
EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE
LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Contents
1 Getting to Know Your Phone ................................................1
Your Phone ........................................................................................... 1
Keys and Functions ........................................................................... 2
20 Warnings and Precautions ............................................... 32
iii
1 Getting to Know Your Phone
/
Your Phone
The following figure shows the appearance of your phone and
it is provided only for your reference.
1 Earpiece 11Input switch key
2 Screen 12Enter key
3 Left soft key13Delete key
4 Call
5 Menu key 15End/Power key
6 Keypad 16Right soft key
7 Alt key 17Ok/Confirm key
8 A/a key 18Navigation keys
9 Space key 19Headset jack
Answer key 14Message key
1
10 Sym key 20
Keys and Functions
Press… To…
Make a call from SIM1/SIM2 card in standby
mode.
Answer an incoming call.
View call logs of SIM1 and SIM2 cards in standby
mode.
Charger jack/ Universal serial
bus (USB) port
Power on or power off the phone (by pressing
and holding the key for about 3s).
End a call or reject an incoming call.
Return to the standby mode.
Access the main menu in standby mode.
Select a highlighted item.
Access Phonebook in standby mode.
Return to the previous menu.
Access the main menu screen in standby mode.
Show the quick icons in any menu functioning
screen.
Access the Messaging screen in standby mode.
Access the selected quick icon option in standby
mode.
Confirm a selection.
2
Press…
T
o…
Press to select the desired quick icon option in
standby mode (the key can be used in four ways,
–
–
Up (
(
Press in left () or right () direction to
), Down (), Left (), and Right
) direction keys).
select or function a function.
Enter numbers, letters, and symbols.
Call the voicemail in standby mode (by pressing
and holding the 1 key for about 3s).
Speed-dial phone numbers by pressing and
holding the 2–9 keys for about 3s in standby
mode. (select Menu > Phonebook > Options > Phonebook settings > Speed dial, enable
speed dial function and assign the desired phone
numbers to the corresponding number keys)
Select a submenu by pressing the corresponding
number key.
Access Audio player in standby mode (by
pressing and holding the key for about 3s).
Enter a blank character in text editing mode.
Press to lock the keypad in standby mode (by
pressing and holding the key for about 3s).
Switch between input methods in text editing
mode.
3
Press…
T
o…
Activate or deactivate the Meeting profile in
standby mode (by pressing and holding the key
for about 3s).
Switch between the upper case and the lower
case in text editing mode.
Access the FM radio in standby mode (by
pressing and holding the key for about 3s).
Display the Select symbol list in text editing
mode.
Screen Icons
Icon Indicates…
/
/
/
/
/
Signal strength.
New text messages.
New multimedia messages.
The call forwarding function is enabled.
Missed call(s).
The Answer machine is enabled.
New voicemail message.
An alarm is enabled.
The keypad is locked.
4
Icon Indicates…
Battery power level.
The General/Indoor profile is enabled.
The Meeting profile is enabled.
The Outdoor profile is enabled.
The headset is connected.
2 Getting Started
Installing the SIM Card and the Battery
You can install two SIM cards on the phone at the same time.
When installing a SIM card, ensure that the golden contact area
on the SIM card is facing downward and that the beveled edge
of the SIM card is properly aligned with that of the SIM card
slot.
Removing the Battery and the SIM Card
Before removing the battery and the SIM cards, ensure that
your phone is powered off.
5
Installing a microSD Card
You can install a microSD card to expand the memory capacity
of your phone. When installing a microSD card, ensure that the
golden contact area on the microSD card is facing downward.
Charging the Battery
1. Connect the USB cable (the larger end) to the charger.
2. Connect the charger to a power socket.
3. Connect the USB cable (the smaller end) to the charger jack
on the phone.
6
4. Wait until the battery is completely charged.
During the charging, the charging icon is displayed in
animation. When the charging icon becomes static, the
battery is fully charged.
5. Disconnect the charger from the phone.
6. Disconnect the charger from the power socket.
Accessing a Function Menu
1. In standby mode, press (Menu).
2. Press to select the desired function menu.
3. Press (OK) or to display the selected menu.
4. Press or to select a submenu.
5. Press (OK) or to display the submenu.
6. Press (Back) to return to the previous menu or exit the
function menu.
To return to the standby mode directly, press
.
Accessing a Quick Menu
1. In standby mode, press or to highlight a quick
menu.
2. Press to select the desired quick menu.
7
Automatically Switching Between Profiles
You can set your phone to activate different profiles for
different time period. The phone can automatically switch
between profiles for a maximum of three times each day
according to your settings.
1. In standby mode, select Menu > User profiles >
ProfileSwitchTiming.
2. Select a clock.
3. Press (Edit) to set the status and time and assign a
profile.
4. Press (Done) to save the setting as prompted.
Phone Lock
The phone lock protects your phone from unauthorized use. By
default, the phone lock function is disabled; once it is enabled,
the phone code is required each time the phone is powered on.
To enable the phone lock function, do as follows:
1. In standby mode, select Menu > Settings > Security
settings > Phone lock.
2. Input the phone code, and then press (Ok).
You can change the default phone lock code (1234) to any
numeric string of four to eight digits.
To change the phone lock code, do as follows:
1. In standby mode, select Menu > Settings > Security
settings > Change password > Phone password.
2. Input the old password.
3. Input the new password twice.
8
Do remember your phone lock code. If you forget it, contact
the service center.
Mass Storage
When the phone is connected to a PC through a USB cable, the
options including Mass storage are displayed on the phone
screen.
When you select Mass storage, you can manage the files
stored on the phone and the microSD card.
The microSD card and the phone memory appear as removable
disks on the PC. You can perform the following operations:
1. Double-click a disk to open it.
2. Copy, paste or delete files on a disk.
3. Disconnect the phone from the PC.
Ensure that you connect and disconnect the USB cable
properly.
Do not use format command attempts to format the
phone memory on a PC; otherwise, it may lead to
permanent damage.
The USB cable supports both data transfers and
charging functions.
PIN and PUK
The personal identification number (PIN) protects your SIM
card from unauthorized use. The PIN unblocking key (PUK) is
used to unlock the blocked PIN. Both the PIN and the PUK are
9
provided with the SIM card. For details, contact your service
provider.
For your phone, SIM1 and SIM2 PIN codes are configured
separately.
To enable the PIN lock function, do as follows:
1. In standby mode, select Menu > Settings > Security
If you enter wrong PINs for a specified number of times
consecutively, the phone asks you to enter the PUK.
If you enter wrong PUKs for a specified number of times
consecutively, the SIM card becomes permanently invalid. In
that case, contact your service provider for a new SIM card.
Locking the Keypad
In standby mode, press and hold for 3s to lock the keypad.
To unlock the keypad, press
If the Auto keypad lock function is enabled, the keypad is
locked automatically when the phone is idle for a preset period
in standby mode. To enable the Auto keypad lock function,
select Menu > Settings > Security settings > Auto keypad lock, select a preset duration, and then press
(Unlock), and then .
(OK) to
confirm the selection.
When the keypad is locked, you can still press
answer an incoming call or make an emergency call.
to
10
Loading...
+ 32 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.