registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names
mentioned are the property of their respective owners.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”.
EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE
LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA , GOODWILL OR ANTICIPATED SAVINGS.
technology is incorporated under license from SRS Labs, Inc.
WOW HD™ significantly improves the playback quality of audio,
delivering a dynamic 3D entertainment experience with deep,
rich bass and high frequency clarity for crisp detail.
is a trademark of SRS Labs, Inc. WOW HD
i
Contents
1 Getting to Know Your Phone ................................................1
Your Phone........................................................................................... 1
Keys and Functions ........................................................................... 2
15 Warnings and Precautions ............................................... 32
iii
1 Getting to Know Your Phone
Your Phone
The following figure shows the appearance of your phone and
is provided only for your reference.
1 Earpiece 11 Input switch key
2 Screen 12 Enter key
3 Left soft key 13 Delete key
4 Call/Answer key 14 Message key
5
Menu key
Keypad
6
7 Fn key 17 OK/Confirm key
8 A/a key 18 Navigation keys
9 Space key 19
15 End/Power key
16 Right soft key
Charger jack/Universal serial
bus (USB) port
1
10 Sym key 20 Headset jack
Keys and Functions
Press … To …
Left soft key)
(
(Right soft key)
Make a call in standby mode from either
Subscriber Identification Module (SIM) card
(SIM1 or SIM2).
Answer an incoming call.
View call logs of SIM1 and SIM2 cards in
standby mode.
Power on or power off the phone (by
pressing and holding the key for about 3s).
End a call or reject an incoming call.
Return to standby mode.
Access the main menu in standby mode.
Select a highlighted item.
Switch between Widget and Shortcuts
modes in standby mode.
Return to the previous menu.
Confirm a selection.
Select the desired quick icon option in
standby mode (the key can be used in four
ways, Up (
and Right (
), Down (), Left (),
) direction keys).
2
Press … To …
Enter numbers, letters, and symbols.
–
–
Call the voicemail in standby mode (by
pressing and holding the 1 key for about 3s).
Select a submenu by pressing the
corresponding number key.
Access Audio player in standby mode (by
pressing and holding the key for about 3s).
Enter a space in text editing mode.
Lock the keypad in standby mode (by
pressing and holding the key for about 3s).
Switch between input methods in text
editing mode.
Switch between upper case and lower case
in text editing mode.
Activate or deactivate the Meeting profile in
standby mode (by pressing and holding the
key for about 3s).
Access the FM radio in standby mode (by
pressing and holding the key for about 3s).
Display the Select symbol list in text editing
mode.
3
Screen Icons
Icon Indicates …
Signal strength
/
New text messages
/
New multimedia messages
/
Call forwarding activated
/
Missed call(s)
/
Alarms enabled
Keypad locked
Battery power level
The General/Indoor profile is enabled.
Meeting profile activated
Headset connected to the phone
Wi-Fi connected
4
2 Getting Started
Installing the SIM Card and the Battery
You can install two SIM cards in the phone at the same time.
When installing a SIM card, ensure that the golden contact area
on the SIM card is facing downward and that the beveled edge
of the SIM card is properly aligned with that of the SIM card
slot.
Removing the Battery and the SIM Card
Before removing the battery and the SIM cards, ensure that
your phone is powered off.
5
Installing a microSD Card
Before installing or removing a microSD card, power off
the phone. Once the phone is powered on, it will indicate
whether the microSD card has been installed properly.
You can install a microSD card to expand the memory capacity
of your phone. When installing a microSD card, ensure that the
golden contact area on the microSD card is facing downward.
Charging the Battery
1. Connect the smaller end of the USB cable to the charger jack
of the phone and the larger end to the charger.
2. Connect the charger to a power socket.
6
3. Wait until the battery is fully charged.
Whilst the battery is charging, the charging icon is animated.
When the battery is fully charged, the charging icon
animation stops.
4. Disconnect the charger from the power socket and then
from the phone.
Accessing a Function Menu
1. In standby mode, press (Menu).
Press to scroll to the desired submenu, and then press
to access the submenu.
1. Press (OK), or to display the selected
menu.
2. Press or to select a submenu.
3. Press (OK) or to display the submenu.
4. Press (Back) to return to the previous menu or
exit the function menu.
To return to standby mode directly, press
.
Accessing Shortcut Icons
1. In standby mode, press or to highlight a
shortcut icon.
2. Press to access the quick menu.
7
Automatically Switching Between
Profiles
Your phone can be set to activate different profiles at specified
times. The phone can automatically switch between profiles a
maximum of three times per day according to the settings.
1. In standby mode, select Menu > User Profile >
ProfileSwitchTiming.
2. Scroll to a clock.
3. Press (Edit) to set the status and time, and
assign a profile.
4. Press (Done) to save the settings.
Phone Lock
The phone lock protects your phone from unauthorized use. By
default, the phone lock function is disabled. Once the phone
lock function is enabled, the phone lock code will be required
each time you power on the phone.
To enable the phone lock function, do the following:
1. In standby mode, select Menu > Settings > Security
settings > Phone lock.
2. Enter the phone lock code, and then press
(OK).
You can change the default phone lock code (1234) to any
string of four to eight digits.
To change the phone lock code, do the following:
1. In standby mode, select Menu > Settings > Security
settings > Change password > Phone password.
8
2. Enter the old password.
3. Enter the new password twice.
Remember your phone lock code. If you forget the code,
contact the service center.
USB Mode
When the phone is connected to a PC using the USB cable,
options including Mass storage are displayed on the phone
screen.
When you select Mass storage, you can manage the files
stored on the phone and the microSD card from the PC’s File
Manager application.
The microSD card and the phone memory appear as removable
disks on the PC. You can do the following:
1. Double-click a disk to open it.
2. Copy, paste, or delete the files on the disk.
3. Disconnect the phone from the PC.
Ensure that you connect and disconnect the USB cable
properly.
Do not format the phone memory on a PC; doing so
may cause permanent damage to the phone memory.
The USB cable can be used to transfer data and charge
your phone. The PC must be running a Windows
based operating system (for example: Windows XP,
Windows 2000, Windows 7). Mac OS systems are not
supported.
9
PIN and PUK
The personal identification number (PIN) protects your SIM
card from unauthorized use. The PIN Unblocking Key (PUK) is
used to unblock a blocked PIN. Both the PIN and the PUK are
provided with the SIM card. For details, contact your service
provider.
The functions related to SIM1 and SIM2 PINs are conf igured
separately.
To enable the SIM1 lock function, do the following:
1. In standby mode, select Menu > Settings > Security
settings > SIM1 security settings > SIM1 lock.
2. Enter the PIN, and then press (OK).
The procedure for setting the SIM2 lock is similar to that of
setting SIM1 lock.
If you repeatedly enter an incorrect PIN, on a specified number
of consecutive attempts, the phone asks you to enter the PUK.
If you repeatedly enter an incorrect PUK, on a specified number
of consecutive attempts, the SIM card becomes permanently
invalid. In that case, contact your service provider for a new SIM
card.
Locking the Keypad
In standby mode, press and hold for about 3s to lock the
keypad. To unlock the keypad, press
then
If the Auto keypad lock function is enabled, the phone locks
the keypad automatically after it is idle for a preset period. To
.
10
(Unlock), and
Loading...
+ 32 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.