registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names
mentioned are the property of their respective owners.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS".
EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE
LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Contents
1 Getting to Know Your Phone .............................................. 1
Your Phone ........................................................................................1
Keys and Functions .........................................................................2
21 Warnings and Precautions .............................................. 35
iii
1
Earpiece
11
Input method switching key
2
Screen
12
Enter key
3
Left soft key
13
Delete key
4
Call/Answer key
14
Social networking services
(SNS) key
1 Getting to Know Your Phone
Your Phone
The following figure shows the appearance of your phone.
1
5
Camera key
15
End/Power key
6
Keypad
16
Right soft key
7
Fn key
17
OK/Confirm key
8
A/a key
18
Navigation keys
9
Space key
19
Charger jack/Universal serial
bus (USB) port
10
Sym key
20
Headset jack
Press…
To…
Make a call from subscriber identity module
(SIM) card in standby mode.
Answer acall.
View call logs in standby mode.
Power the phone on or off (press and hold the
key for about 3 seconds).
End or reject a call.
Return to standby mode.
Turn off the screen display.
Select the option displayed in the lower left corner
of the screen.
Keys and Functions
2
Press…
To…
Switch between Widget and Shortcuts in
standby mode.
Select the option displayed in the lower right
corner of the screen.
Access SNS in standby mode.
Access Camera in standby mode.
Confirm a selection.
Scroll through the main menu (press ,
, , or ).
Scroll to the desired shortcut icon in standby
mode (press , , , or ).
through
through
Enter numbers, letters, and symbols.
Call voicemail in standby mode (press and hold
the 1 key for about 3 seconds).
Select an option labeled with the corresponding
number.
Enter a space in editing mode.
Lock the keypad in standby mode (press and
hold the key for about 3 seconds).
Switch between text input methods in editing
mode.
3
Press…
To…
Switch between the upper and lower cases in
editing mode.
Display the Select symbol list in editing mode.
Activate or deactivate the Meeting profile in
standby mode (press and hold the key for about 3
seconds).
4
Screen Icons
Icon
Indicates…
Signal strength.
New text messages.
New multimedia messages.
Call forwarding enabled.
Missed calls.
Alarms enabled.
Keypad locked.
Battery level.
Ring only enabled.
Vib. Only enabled.
Vib. and ring enabled.
Vib. then ring enabled.
Silent profile activated.
Headset connected.
Bluetooth turned on.
5
2 Getting Started
Installing the SIM Card and the Battery
When installing a SIM card, ensure that the gold contact area
faces down, and that the beveled edge of the SIM card aligns
with that of the SIM card slot.
Removing the Battery and the SIM Card
Before removing the battery and the SIM card, ensure that your
phone is powered off.
6
Before installing or removing a microSD card, power the
phone off. When the phone is powered back on, it
indicates whether the microSD card has been correctly
installed.
Installing and Removing a microSD Card
You can expand your phone's memor y capacity by installing a
microSD card. When installing a microSD card, ensure that the
gold contact area faces down.
Charging the Battery
1. Connect the small end of the USB cable to the phone's
charger jack and the large end to the charger.
2. Connect the charger to a power outlet.
7
3. Wait until the battery is fully charged.
While the battery is charging, the charging icon blinks. When
the charging icon stops blinking, the battery is fully charged.
4. Unplug the charger from the power outlet and the USB cable
from the phone.
Navigating the Main Menu
1. In standby mode, press (Menu) to access the main
menu.
2. Use to scroll to the desired application, and press
to access the application.
3. Press or to scroll to the desired option, and
press (OK) or to access the option.
4. Press (Back) to return to the previous screen or
press to return to standby mode.
Automatically Switching Between Profiles
You can configure your phone to activate different profiles at
different times. The phone can automatically switch between
profiles according to your settings.
To automatically switch between profiles:
1. Select Menu > User profiles > Profile switch timing.
2. Scroll to a clock.
8
3. Press (Edit) to set the profile to activate at a
specified time.
4. Press (Done) to save the settings.
Phone Lock
The phone lock protects your phone from unauthorized use.
The preset password to unlock your phone is 1234. By default,
the phone lock is disabled. Once you enable the phone lock,
you must enter the password each time you power on the
phone.
To enable the phone lock:
1. Select Menu > Settings > Security settings > Phone
security > Phone lock.
2. Enter the preset password, and press (OK).
To change the preset password:
1. Select Menu > Settings > Security settings > Phone
security > Change password.
2. Enter the preset password, and press (OK).
3. Enter a new password, and press (OK).
The password must be a numeric string between four and
eight digits.
4. Enter the new password again to confirm it.
If you forget the password, contact your service provider.
9
Ensure that you connect and disconnect the USB cable
correctly.
Do not run the formatting command on the computer
to format the phone memory; doing so may get
permanently damage the phone memory.
You can transfer data and charge the battery by
connecting the phone to the computer with the USB
cable.
Mass Storage
When you have connected your phone to a computer using the
USB cable, you can select Mass storage to manage the files
stored in the phone memory or microSD card using the
computer's file manager application.
The phone memory and its microSD card are displayed as
removable disks on the computer. You can perform the
following operations:
Double-click a disk to open it.
Copy, paste, or delete files.
Disconnect the phone from the computer.
PIN and PUK
The personal identification number (PIN) protects your SIM
card from unauthorized use.
If you incorrectly enter the PIN a specified number of times, the
PIN is blocked and the phone prompts you to enter the PIN
10
unblocking key (PUK). If this occurs, enter the PUK to unblock
the blocked PIN.
If you incorrectly enter the PUK a specified number of times,
the SIM card will become permanently invalid, and you must
contact your service provider for a new SIM card.
Both the PIN and the PUK are provided with the SIM card. For
details, contact your service provider.
To enable the PIN lock:
1. Select Menu > Settings > Security settings > SIM
security > PIN lock.
2. Enter the PIN, and press (OK).
Locking and Unlocking the Keypad
To lock the keypad, press and hold in standby mode for
about 3 seconds. To unlock the keypad, press
(Unlock), then (OK).
If the Auto keypad lock function is enabled, the phone will
automatically lock the keypad after being idle in standby mode
for a pre-defined period.
To enable the Auto keypad lock function, select Menu >
Settings > Security settings > Auto keypad lock, scroll to a
desired duration, and press (OK) to select the
duration.
11
Loading...
+ 34 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.