Huawei EA660 135 User Manual

eLTE2.2 eA660 Series CPE

User Guide

Issue 01 Date 2013-10-30

HUAWEI TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang Shenzhen 518129

People's Republic of China Website: http://www.huawei.com Email: support@huawei.com

Issue 01 (2013-10-30)

Huawei Proprietary and Confidential

eLTE2.2 eA660 Series CPE User Guide About This Document

About This Document

Overview

This document describes the hardware, functions, installation, configuration, operation and maintenance (OM) of the eA660 series customer premises equipment (CPE).

Product Version

Product Name Product Version

eA660 Series CPE V100R001C01

Intended Audience

This document is intended for:

System engineers

Product engineers

Technical support engineers

Change History

Issue 01 (2013-10-30)

This is the first commercial release.

Issue 01 (2013-10-30) Huawei Proprietary and Confidential

eLTE2.2 eA660 Series CPE User Guide Contents

Contents

About This Document .................................................................................................................... ii

1 Overview ......................................................................................................................................... 1

1.1 Product Introduction ..................................................................................................................................................... 1

1.2 Application Scenarios ................................................................................................................................................... 2

1.3 Hardware Specifications ............................................................................................................................................... 5

1.4 Antenna Specifications ................................................................................................................................................. 6

2 Hardware ........................................................................................................................................ 7

2.1 eA660 Hardware ........................................................................................................................................................... 7

2.2 eA660 Cables .............................................................................................................................................................. 10

2.2.1 PoE Network Cable ................................................................................................................................................. 10

2.2.2 Ground Cable ........................................................................................................................................................... 10

3 Installation.................................................................................................................................... 12

3.1 Installation Preparation ............................................................................................................................................... 12

3.2 Installation Procedure ................................................................................................................................................. 13

3.2.1 Mounting on a Utility Pole (Without an Angle Adjusting Component) ................................................................... 13

3.2.2 Mounting on a Utility Pole (with an Angle Adjusting Component) ........................................................................ 19

3.2.3 Mounting on the Wall (Without an Angle Adjusting Component) ........................................................................... 26

3.2.4 Mounting on the Wall (with an Angle Adjusting Component)................................................................................. 32

3.2.5 Cable Connection ..................................................................................................................................................... 38

3.3 Installation Check ....................................................................................................................................................... 42

4 Configuring the eA660 ............................................................................................................... 45

5 Maintenance ................................................................................................................................. 46

5.1 Maintenance Preparation ............................................................................................................................................ 46

5.2 Fault Diagnosis ........................................................................................................................................................... 46

Issue 01 (2013-10-30) Huawei Proprietary and Confidential

iii

eLTE2.2 eA660 Series CPE User Guide 1 Overview

1 Overview

1.1 Product Introduction

HUAWEI eA660 is a piece of customer premises equipment (CPE) that functions as the long term evolution (LTE) wireless gateway. It implements the conversion between LTE wireless data and wired Ethernet data and supports data backhaul. The eA660 series can be used independently and deployed outdoors.

The eA660 supports the LTE R8 standards and provides the following services:

Data services

The eA660 series uses LTE broadband technologies to support high-speed broadband network access, data backhaul, and video surveillance.

Small-scale local area network (LAN)

The eA660 series can connect to external concentrators and Ethernet switches or routers to set up a LAN with multiple computers. When terminal devices on the LAN connect to the eA660 using network cables, the terminal devices can provide data services.

Security services

The eA660 series supports the firewall and PIN password, which protects your computers when you access the Internet.

Firewall services

The eA660 series supports the following firewall services:

− Firewall enabling or disabling: enables or disables firewalls.

− Media access control (MAC) address filtering: prevents certain MAC addresses from

accessing the computers on a LAN.

− IP address filtering: blocks certain IP addresses from accessing the local computers.

− URL filtering: prevents computers from accessing certain URLs.

Local and remote management and maintenance

The eA660 series can be locally configured in the local city to implement device management and network configuration, thereby ensuring stable operation of the device.

Warning

Issue 01 (2013-10-30) Huawei Proprietary and Confidential

eLTE2.2 eA660 Series CPE User Guide 1 Overview

z This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

z FCC Caution To assure continued compliance, any changes or modifications not

expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

z FCC Radiation Exposure Statement To comply with FCC RF exposure requirements in

section 1.1307, a minimum separation distance of 20cm is required between the antenna and all public persons.

1.2 Application Scenarios

The eA660 provides wireless broadband and wired Ethernet data services.

The eA660 is deployed outdoors and provides wireless gateway services. The eA660 can be deployed independently or used in conjunction with the eA100, which is deployed indoors and connected to the eA660 using a network cable, enabling the eA660 to provide Wi-Fi and other Internet services.

For details about the eA100, see the eLTE2.1 eA100 Series CPE Product Description.

Figure 1-1 shows an application scenario in which the eA660 is used with the eA100.

Issue 01 (2013-10-30) Huawei Proprietary and Confidential

eLTE2.2 eA660 Series CPE User Guide 1 Overview

Figure 1-1 The eA660 deployed with the eA100

The eA660 provides a variety of data services, such as LTE-TDD wireless routing and converting LTE wireless data into wired Ethernet data, and vice versa. Figure 1-2 shows an application scenario in which the eA660 is used in private industrial networks.

Figure 1-2 The eA660 deployed in industrial private networks

The following example describes how to use the eA660 for video monitoring.

Issue 01 (2013-10-30) Huawei Proprietary and Confidential

eLTE2.2 eA660 Series CPE User Guide 1 Overview

1. Use a power adapter to supply power for the eA660 or video camera, as shown in Figure

1-3.

Figure 1-3 The eA660 connected to a video camera.

2. Use a network cable to connect the eA660 to an external device. If the eA660 connects

to a single device, connect the power adapter directly to the eA660. If the eA660 connects to multiple devices, connect the power adapter to a Hub or switch and then to the eA660, as shown in Figure 1-4.

Issue 01 (2013-10-30) Huawei Proprietary and Confidential

eLTE2.2 eA660 Series CPE User Guide 1 Overview

Figure 1-4 The eA660 connected to multiple devices

110-240V AC

1.3 Hardware Specifications

Table 1-1 describes the technical specifications of eA660.

Table 1-1 Technical specifications of eA660

Category eA660-160 eA660-135

Technical standards

Working band LTE TDD (2300 MHz to 2400

External ports 1 Ethernet interface (RJ45): 10/100Base-TX

Transmit power

WAN: LTE R8

LAN: IEEE 802.3/802.3u

MHz)

LTE TDD (2570 MHz to 2620 MHz)

1 USB interface

2 External antenna interface (N)

1 SIM card slot

LTE

23 dBm (±2)

LTE TDD (3650 MHz to 3675 MHz)

Receiving sensitivity

LTE

Meets the 3GPP 36 101 standard

< -100 dBm/5 MHz

< -97 dBm/10 MHz

Issue 01 (2013-10-30) Huawei Proprietary and Confidential

LTE

Meets the 3GPP 36 101 standard

< -96 dBm/10 MHz

< -94.2dBm/20 MHz

eLTE2.2 eA660 Series CPE User Guide 1 Overview

Category eA660-160 eA660-135

< -94 dBm/20 MHz

Power consumption

Power supply Power over Ethernet (PoE) power supply

Dimensions (H x W x D)

Waterproof and dustproof grade

Weight About 1500 g (without power adapter)

Working temperature

Storage temperature

Relative humidity

Installation method

< 25 W

280 mm x 250 mm x 90 mm

IP67

-40°C to 65°C

-40°C to 70°C

5% RH to 95% RH

Mounted on utility poles or walls

< -93 dBm/20 MHz

1.4 Antenna Specifications

Table 1-2 and lists the eA660antenna's specifications.

Table 1-2 eA660 LTE antenna specifications

Item eA660-160 eA660-135

Band 2300 MHz to 2400 MHz

Input impedance 50 ohm 50 ohm

SWR < 2 < 2

Gain 13 dBi 16 dBi

Polarization Dual polarization Dual polarization

(LTE Band 40)

2570 MHz to 2620 MHz (LTE Band 38)

3650 MHz to 3675 MHz (LTE Band 43)

Radiation pattern Directional antenna Directional antenna

Issue 01 (2013-10-30) Huawei Proprietary and Confidential

eLTE2.2 eA660 Series CPE User Guide 2 Hardware

2 Hardware

2.1 eA660 Hardware

This section describes the appearance, ports, and indicators of the eA660.

Appearance

Figure 2-1 shows the appearance of the eA660.

Figure 2-1 eA660 appearance

Panel

The panel of the eA660 provides the Power over Ethernet (PoE) port, SIM card maintenance window, and indicator.

Figure 2-2 shows the panel of the eA660.

Issue 01 (2013-10-30) Huawei Proprietary and Confidential

eLTE2.2 eA660 Series CPE User Guide 2 Hardware

Figure 2-2 Panel of the eA660

Table 2-1 lists the ports of the eA660.

Table 2-1 Ports on the eA660

Name Description

PoE PoE port

LED Indicators

SIM card maintenance window Consists of the SIM card slot and USB port.

A SIM card is inserted into the SIM card slot.

The USB port is used for internal commissioning.

Grounding end Connects a ground cable

Nameplate Displays the identifier information of a

vendor

Anti-scalding label Anti-scalding sign

External antenna interface

NOTE

Only supports dual-polarized antenna or dual

Issue 01 (2013-10-30) Huawei Proprietary and Confidential

eLTE2.2 eA660 Series CPE User Guide 2 Hardware

Name Description

antenna installation。

Indicators of the eA660 are below the SIM card maintenance window and are used to indicate the running status of the eA660.

The four indicators from top to bottom are POWER, WLINK, RSSI, and HEAT, as shown

in Figure 2-3.

Figure 2-3 Indicators of the eA660

Table 2-2 describes the indicators of the eA660.

Table 2-2 Indicators of the eA660

Identifier Status Description

POWER On The power supply is normal.

Off No power is supplied.

WLINK Steady on The eA660 is successfully registered

to the network.

Blink per 1000 ms The product fails to register to the

network.

RSSI

NOTE

The blink frequency

Steady on The signal strength ranges from –40

dBm to –60 dBm.

Blink per 500 ms The signal strength ranges from –60

Issue 01 (2013-10-30) Huawei Proprietary and Confidential

eLTE2.2 eA660 Series CPE User Guide 2 Hardware

Identifier Status Description

of the RSSI indicator on the panel is determined by the valve of the reference signal received power (RSRP).

Blink per 1000 ms The signal strength ranges from –80

Blink per 2000 ms The signal strength ranges from -105

Off The signal strength is equal to or

dBm to –80 dBm.

dBm to –105 dBm.

dBm to -120 dBm.

smaller than –120 dBm.

HEAT Controlled by the

2.2 eA660 Cables

2.2.1 PoE Network Cable

The power over ethernet (PoE) network cable is a shielded network cable that is used to connect the PoE port of the eA660. The PoE network cable connects to an RJ45 connector at both ends.

Background Information

The PoE network cable transmits data signals to the eA660 and provides DC power for the equipment.

hardware temperature.

When the hardware temperature is lower than 0°C, the hardware is heated and the indicator is on.

When the hardware temperature is higher than 0°C, the indicator is off.

Technical Specifications

Table 2-3 lists the technical specifications of the PoE network cable.

Table 2-3 Technical specifications of the PoE network cable

Name Description

Color Black

Outer diameter 6.8 mm

Working temperature range –40°C to 75°C

2.2.2 Ground Cable

The ground cable ensures the proper grounding of the eA660.

Issue 01 (2013-10-30) Huawei Proprietary and Confidential

eLTE2.2 eA660 Series CPE User Guide 2 Hardware

Appearance

The ground cable provides a 6 mm² cross-section, is yellow-green, and has OT terminals at both ends. Figure 2-4 shows the appearance of the ground cable.

Figure 2-4 Ground cable

Technical Specifications

Table 2-4 lists the technical specifications of the ground cable.

Table 2-4 Technical specifications of the ground cable

Name Description

Color Yellow-green

Cross-section 6 mm²

Outer diameter 5.1 mm

Working temperature range –10°C to 70°C

Issue 01 (2013-10-30) Huawei Proprietary and Confidential

eLTE2.2 eA660 Series CPE User Guide 3 Installation

3 Installation

3.1 Installation Preparation

Before you install the eA660, unpack and inspect the equipment delivered to the site and prepare the related tools.

Prerequisites

Perform the following operations to inspect the goods delivered to the site:

1. Unpack the equipment, count the total number of items based on the packing list

2. Check whether the models and quantities are consistent with those specified on the

3. Record the serial number of the CPE.

Installation Tools

Table 3-1 lists the tools used for installing the eA660.

Table 3-1 Installation tools

Hammer drill

attached to each packing case, and check whether each packing case is intact.

Packing List.

ESD gloves

Vacuum cleaner

Phillips screwdriver (M3–M6)

Heat gun

Issue 01 (2013-10-30) Huawei Proprietary and Confidential

Flat-head screwdriver (M3–M6)

+ 35 hidden pages