Huawei E3619U 828 Users Guide

Quick Start Guide

华为信息资产

仅供TUV SUD使用

严禁扩散

华为信息资产

仅供TUV SUD使用

严禁扩散

9672XXXX_01

Installing the SIM Card

Firmly close the nano-SIM card cover when not

in use to prevent water from entering the device.

To remove the nano-SIM card, gently press the

nano-SIM card in until it clicks. The card will

automatically pop out.

华为信息资产

仅供TUV SUD使用

严禁扩散

Open the nano-SIM card cover and insert the card into the

card slot in the direction shown in the following figure (with

the chip side facing up and the notch facing inward).

1

Powering on

To power off your locator, press and hold the

Power button until you hear a beep.

华为信息资产

仅供TUV SUD使用

严禁扩散

Press and hold the Power button for 3 seconds to power on

your locator. When the indicator turns steady blue, your

locator is connected to the network.

Downloading the HUAWEI Locator App

Scan the following QR code with your phone, or go to

Google Play/App Store to download and install the

HUAWEI Locator app.

2

Pairing



Multifunction button



Buzzer



Charging port



SIM card slot



Indicator



Power button

⑦

Strap hole

华为信息资产

仅供TUV SUD使用

严禁扩散

1. Open the HUAWEI Locator app and log in as prompted.

2. Touch at the bottom of the home page and complete

pairing as prompted.

Appearance

3

Charging

The indicator turns steady green when charging

is complete.

华为信息资产

仅供TUV SUD使用

严禁扩散

Use a charger with a 5V/1A output to charge your locator.

Help

For more details, scan the QR code below or refer to user

guide in the HUAWEI Locator app.

4