Huawei E230 User Manual
Copyright © 2008 Huawei Technologies Co., Ltd.
All Rights Reserved
No part of this document may be reproduced or transmitted in any form or by any means
without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their
respective holders.
Notice
The information in this document is subject to change without notice. Every effort has been
made in the preparation of this document to ensure accuracy of the contents, but all
statements, information, and recommendations in this document do not constitute the
warranty of any kind, express or implied.
Table of Contents
Getting to Know the E230 .......................................................................................1
Requirements for the PC..........................................................................................3
Preparing the E230 ..................................................................................................3
Installation Guide.....................................................................................................6
Safety Information ...................................................................................................9
i
Thank you for purchasing Huawei E230 HSPA USB Modem.
Note:
This manual briefly the preparation, the process for installing/uninstalling, and safety
precautions for using Huawei E230 HSPA USB Modem (hereinafter referred to as the
E230).
You are recommended to read the manual before using the E230.
The signal strength and the transmission rate are affected by the actual environment.
The electromagnetic wave emitted from the PC may interfere with wireless signals.
When the signal is weak or the transmission rate is low, you are recommended to use
the long USB cable provided with the E230 and change the position of the E230 for
receiving strong signals.
Getting to Know the E230
The following figures show the appearance of the E230. The actual product may differ.
1
2
3
1
4
Indicator
Indicates the status of the E230.
Green, blinking twice every 3s: The E230 is powered on.
Green, blinking once every 3s: The E230 is registered to the GSM/GPRS/EDGE network.
Blue, blinking once every 3s: The E230 is registered to the WCDMA/HSDPA/HSUPA
network.
Green, always on: The GPRS/EDGE connection is set up.
Blue, always on: The WCDMA connection is set up.
Cyan, always on: The HSDPA/HSUPA connection is set up.
Off: The E230 is removed from the PC.
Micro SD card slot
Holds the micro SD card.
Mini-USB interface
You can connect the mini-USB connector of the data cable to the mini-USB interface.
USIM/SIM card slot
Holds the USIM/SIM card.
2
Requirements for the PC
To use the E230, the PC must meet the following requirements:
Standard USB interface
Windows 2000 SP4, Windows XP SP2, Windows Vista.
The hardware of your PC must meet or exceed the recommended system requirements
for the installed version of OS.
Display resolution: 800 × 600 or above.
Preparing the E230
Installing the USIM/SIM Card
1. Take out of the USIM/SIM card slot from the E230.
3
Loading...