Huawei E1330S-6 User Manual

Thank you for purchasing HUAWEI E1330s-6 UltraStick.





With your UltraStick, you can access a wireless network
at high speed. (hereinafter referred to as the E1330s-6)

Note:

 You are recommended to read the manual before using the E1330s-6.

 This manual describes the appearance of the E1330s-6, as well as the procedures for

preparation.

Getting to Know Your E1330s-6

The E1330s-6 ‘s dimension is 65 mm×35 mm×3.3 mm. The following figure shows the
appearance of the E1330s-6. It is provided only for your reference. The actual product may
be different.

 UltraStick plug port

It connects the E1330s-6 to a Tab le t.

 SIM Card Slot

It holds a subscriber Identity Module (SIM) card.

Getting Your E1330s-6 Ready

Insert the SIM card into the corresponding card slots, as shown in the following figure.

Note:

 Ensure that the beveled edge of the SIM card is properly aligned with that of the SIM

card slot.

 Do not remove the SIM card when the card is in use. Otherwise, the card as well as your

E1330s-6 may get damaged and the data stored on the card may be corrupted.

Connecting the E1330s-6 to a Tablet

Plug the E1330s-6 into the UltraStick plug port of your Tablet as shown in the following
figure.