Huawei CM70 L User Manual
Quick Start Guide
CM70-L
Ghiddepornirerapidă
Appearance
English
Powering on/off
Press and hold the Power button for approximately 1 second to power on/off (when
powering on for the first time, your earbuds will automatically enter Pairing mode by
default).
Pairing and automatic connections
Bluetooth pairing
1. Press and hold the Power button for approximately 4 seconds to enter Pairing mode
(at this time, the indicator will flash white).
2. Enable the Bluetooth on your phone, then search for the device name "HUAWEI
FreeLace" and connect.
Automatic reconnection
Once your earbuds power on, they will automatically connect to the most recently paired
device.
Please ensure that the Bluetooth on your phone is enabled, and that your earbuds
are within the Bluetooth range of your phone.
Hall magnetic switch
When the switch is closed, the earbuds are disconnected.
When the switch is apart, the earbuds automatically reconnect.
How to use the earbuds
Call mode
Upon receiving an incoming call, press the Function button to answer the call, or press and
hold the Function button for approximately 2 seconds to reject the call.
During an ongoing call, press the Function button to end the call.
1
English
Music mode
Press the Function button to play/pause music playback.
Double-press the Function button to skip to the next song.
Triple-press the Function button to return to the previous song.
Press the Volume up button to increase the volume.
Press the Volume down button to decrease the volume.
Smart mode
In Music or Standby mode, press and hold the Function button for approximately 2
seconds to activate voice assistant on your phone.
HUAWEI HiPair Technology
After plugging your earbuds' built-in USB Type-C connector into your phone:
1. If your earbuds are not already paired with your phone, your phone will prompt the
pairing via a pop-up window. In this case, following the onscreen instructions on your
phone to complete the pairing process (only available on EMUI 9.1 or later).
2. You can quickly charge your earbuds using your phone (Reverse charging required).
Factory reset
Press and hold the Power button for approximately 10 seconds to restore to factory
settings. When the indicator flashes red, your earbuds will be restored to its factory
settings, clearing all Bluetooth pairing information, and then will restart.
Charging your earbuds
1. Charge via connecting the charger.
The charger can be connected via the USB Type-A to USB Type-C female adapter
cable.
2. Charge via connecting your earbuds to your phone.
Connect your earbuds to the USB Type-C port of your phone (Reverse charging
required).
2
Loading...