Congratulations on the purchase of your new Windows Mobile® Smartphone!
Please Read Before Proceeding.
THIS PHONE IS NOT FULLY CHARGED WHEN YOU TAKE IT OUT OF THE BOX.
DO NOT REMOVE THE BATTERY PACK WHEN THE PHONE IS CHARGING.
YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE
PHONE'S OUTER CASING.
PRIVACY RESTRICTIONS
Some countries require full disclosure of recorded telephone conversations, and
stipulate that you must inform the person with whom you are speaking that the
conversation is being recorded. Always obey the relevant laws and regulations of
your country when using the recording feature of your phone.
, , , ExtUSB are trademarks and/or service marks of High
Tech Computer Corp.
Microsoft, MS-DOS, Windows, Windows NT, Windows Server, Windows Mobile,
ActiveSync, Excel, Internet Explorer, MSN, Hotmail, Outlook, PowerPoint, Word,
and Windows Media are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Bluetooth and the Bluetooth logo are trademarks owned by Bluetooth SIG, Inc.
Wi-Fi is a registered trademark of the Wireless Fidelity Alliance, Inc.
microSD is a trademark of SD Card Association.
Java, J2ME and all other Java-based marks are trademarks or registered
trademarks of Sun Microsystems, Inc. in the United States and other countries.
Macromedia, Flash, Macromedia Flash, Macromedia Flash Lite and Reader are
trademarks and/or registered trademarks of Macromedia Netherlands, B.V. or
Adobe Systems Incorporated.
All other company, product and service names mentioned herein are trademarks,
registered trademarks or service marks of their respective owners.
HTC shall not be liable for technical or editorial errors or omissions contained
herein, nor for incidental or consequential damages resulting from furnishing this
material. The information is provided “as is” without warranty of any kind and is
subject to change without notice. HTC also reserves the right to revise the content
of this document at any time without prior notice.
No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, recording or storing
in a retrieval system, or translated into any language in any form without prior
written permission of HTC.
3
4
Important Health Information and Safety
Precautions
When using this product, the safety precautions below must be taken to
avoid possible legal liabilities and damages. Retain and follow all product
safety and operating instructions. Observe all warnings in the operating
instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage to the
equipment, observe the following precautions.
ELECTRICAL SAFETY
This product is intended for use when supplied with power from the
designated battery or power supply unit. Other usage may be dangerous
and will invalidate any approval given to this product.
SAFETY PRECAUTIONS FOR PROPER GROUNDING INSTALLATION
CAUTION: Connecting to an improperly grounded equipment can result in
an electric shock to your device.
This product equipped with a USB Cable for connecting with desk-top or
notebook computer. Be sure your computer is properly grounded (earthed)
before connecting this product to the computer. The power supply cord of
a desktop or notebook computer has an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate outlet
which is properly installed and grounded in accordance with all local codes
and ordinances.
SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT
• Use the correct external power source
A product should be operated only from the type of power source
indicated on the electrical ratings label. If you are not sure of the type
of power source required, consult your authorised service provider or
local power company. For a product that operates from battery power
or other sources, refer to the operating instructions that are included
with the product.
This product should be operated only with the following designated
power supply unit(s):
1. Delta, Model ADP-5FH X
2. Phihong, Models PSAA05X-050
Car Adapter
1. Phihong, Model CLM10D-050
• Handle battery packs carefully
This product contains a Li-ion battery. There is a risk of fire and burns
if the battery pack is handled improperly. Do not attempt to open or
service the battery pack. Do not disassemble, crush, puncture, short
external contacts or circuits, dispose of in fire or water, or expose a
battery pack to temperatures higher than 60˚C (140˚F).
WARNING: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. TO REDUCE RISK OF FIRE OR BURNS, DO NOT
DISASSEMBLE, CRUSH, PUNCTURE, SHORT EXTERNAL CONTACTS,
EXPOSE TO TEMPERATURE ABOVE 60˚C (140˚F), OR DISPOSE OF IN
FIRE OR WATER. REPLACE ONLY WITH SPECIFIED BATTERIES. RECYCLE
OR DISPOSE OF USED BATTERIES ACCORDING TO THE LOCAL
REGULATIONS OR REFERENCE GUIDE SUPPLIED WITH YOUR PRODUCT.
NoteThis product should be operated only with the following designated Battery
Pack(s).
• HTC, Model LIBR160
• Simplo, Model LIBR160
5
6
SAFETY PRECAUTIONS FOR DIRECT SUNLIGHT
Keep this product away from excessive moisture and extreme temperatures.
Do not leave the product or its battery inside a vehicle or in places where
the temperature may exceed 60°C (140°F), such as on a car dashboard,
window sill, or behind a glass that is exposed to direct sunlight or strong
ultraviolet light for extended periods of time. This may damage the product,
overheat the battery, or pose a risk to the vehicle.
PREVENTION OF HEARING LOSS
CAUTION: Permanent hearing loss may occur if
earphones or headphones are used at high volume for
prolonged periods of time.
NoteFor France, mobile headphones, earphones, and wired remote controllers
(listed below) for this device have been tested to comply with the Sound
Pressure Level requirement laid down in NF EN 50332-1:2000 and/or NF EN
50332-2:2003 standards as required by French Article
L. 5232-1.
1. Earphone, manufactured by Merry, Model EMC220.
SAFETY IN AIRCRAFTS
Due to the possible interference caused by this product to an aircraft’s
navigation system and its communications network, using this device’s
phone function on board an airplane is against the law in most countries. If
you want to use this device when on board an aircraft, remember to turn off
the phone by switching to Flight Mode.
ENVIRONMENT RESTRICTIONS
Do not use this product in gas stations, fuel depots, chemical plants or
where blasting operations are in progress, or in potentially explosive
atmospheres such as fuelling areas, fuel storehouses, below deck on
boats, fuel or chemical transfer or storage facilities, and areas where the
air contains chemicals or particles, such as grain, dust, or metal powders.
Please be aware that sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
EXPLOSIVE ATMOSPHERES
When in any area with a potentially explosive atmosphere or where
flammable materials exist, the product should be turned off and the user
should obey all signs and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death. Users are advised
not to use the equipment at refueling points such as service or gas stations,
and are reminded of the need to observe restrictions on the use of radio
equipment in fuel depots, chemical plants, or where blasting operations
are in progress. Areas with a potentially explosive atmosphere are often,
but not always, clearly marked. These include fueling areas, below deck on
boats, fuel or chemical transfer or storage facilities, and areas where the air
contains chemicals or particles, such as grain, dust, or metal powders.
ROAD SAFETY
Vehicle drivers in motion are not permitted to use telephony services with
handheld devices, except in the case of emergency. In some countries,
using hands-free devices as an alternative is allowed.
SAFETY PRECAUTIONS FOR RF EXPOSURE
• Avoid using your device near metal structures (for example, the steel
frame of a building).
• Avoid using your device near strong electromagnetic sources, such as
microwave ovens, sound speakers, TV and radio.
• Use only original manufacturer-approved accessories, or accessories
that do not contain any metal.
• Use of non-original manufacturer-approved accessories may violate
your local RF exposure guidelines and should be avoided.
INTERFERENCE WITH MEDICAL EQUIPMENT FUNCTIONS
This product may cause medical equipment to malfunction. The use of this
device is forbidden in most hospitals and medical clinics.
If you use any other personal medical device, consult the manufacturer
of your device to determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you in obtaining this
information.
Turn the phone OFF in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
7
8
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your service provider,
or call the customer service line to discuss alternatives.
NONIONIZING RADIATION
This product should be operated in the suggested normal condition only
to ensure the radiative performance and safety of the interference. As
with other mobile radio transmitting equipment, users are advised that for
satisfactory operation of the equipment and for the safety of personnel, it
is recommended that no part of the human body be allowed to come too
close to the antenna during operation of the equipment.
General Precautions
• Heed service markings
Except as explained elsewhere in the Operating or Service
documentation, do not service any product yourself. Service needed
on components inside these compartments should be done by an
authorized service technician or provider.
• Damage requiring service
Unplug the product from the electrical outlet and refer servicing to
an authorized service technician or provider under the following
conditions:
• Liquid has been spilled or an object has fallen into the product.
• The product has been exposed to rain or water.
• The product has been dropped or damaged.
• There are noticeable signs of overheating.
• The product does not operate normally when you follow the
operating instructions.
• Avoid hot areas
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including, but
limited to, amplifiers) that produce heat.
• Avoid wet areas
Never use the product in a wet location.
• Avoid using your device after a dramatic change in temperature
When you move your device between environments with very
different temperature and/or humidity ranges, condensation may
form on or within the device. To avoid damaging the device, allow
sufficient time for the moisture to evaporate before using the device.
NOTE:When taking the device from low-temperature conditions into a
warmer environment or from high-temperature conditions into
a cooler environment, allow the device to acclimate to room
temperature before turning on the power.
• Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other openings
in the product. Slots and openings are provided for ventilation. These
openings must not be blocked or covered.
• Mounting Accessories
Do not use the product on an unstable table, cart, stand, tripod,
or bracket. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting accessory
recommended by the manufacturer.
• Avoid unstable mounting
Do not place the product with an unstable base.
• Use product with approved equipment
This product should be used only with personal computers and
options identified as suitable for use with your equipment.
• Adjust the volume
Turn down the volume before using headphones or other audio
devices.
• Cleaning
Unplug the product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, but
NEVER use water to clean the LCD screen.
9
10
Contents
Chapter 1 Getting Started 15
1.1 Getting to Know Your Phone and Its Accessories ...............16
1.2 Inserting the SIM Card ..........................................................22
1.3 Inserting the Battery ............................................................23
1.4 Installing a microSD Card .....................................................23
1.5 Turning On and Off the Phone .............................................24
1.6 Home Screen .........................................................................24
1.7 Programs On Your Phone .....................................................25
1.8 Start Menu .............................................................................28
1.9 Quick List ...............................................................................28
1.10 Entering Information ..........................................................29
1.11 Battery Information ............................................................33
1.12 Status Indicators .................................................................35
Chapter 2 Using Phone Features 37
2.1 Using the Phone ....................................................................38
2.2 Making a Call .........................................................................39
2.3 Receiving a Call ......................................................................41
1.1 Getting to Know Your Phone and Its Accessories
1
2
3
4
5
6
7
8
9
14
10
11
12
13
15
Getting Started 17
ItemFunction
1. LED IndicatorsThe left LED indicators (blue/green) notify you of Bluetooth and
2. Ear pieceListen to a phone call.
3. Display Screen
4. BACKPress to go to the previous screen, or backspace over characters.
5.
Right
SOFT KEYPress to perform the command shown in the label above the
6. NAVIGATION
CONTROL/
CENTER OK
7. Left SOFT KEYPress to perform the command shown in the label above the
8. HOMEPress to go to the Home Screen.
9. TALK
10. *T9
11. Light SensorDark conditions sensed here will activate a backlight under the
12. #SpacePress to add a space or press and hold to display a list of
13. ENDPress to end a call, or press and hold to lock the phone.
14. QWERTY Keyboard Slide out to use the QWERTY keyboard. This is similar to a
15. POWERPress to turn on (more than 1 second) and off the phone. Or
Wi-Fi connectivity status, while the right indicators (green/red/
orange) notify you of the battery and network status of your
phone respectively . For more information about LED Indicators,
see thetable at the end of this section.
button.
Use to scroll left, right, up, or down. Press the center to use as
the CENTER OK button.
button.
Press to dial a phone number, answer a call, switch to another
call, or put a call on hold. Press and hold to activate/deactivate
speakerphone mode
Press to switch to different input modes or press and hold to
choose an input mode from a list.
keypad and keyboard.
symbols.
standard keyboard on a PC. For more information about the
QWERTY keyboard, see "Using the QWERTY Keyboard" in this
chapter.
press and quickly release the POWER button to display the
Quick List. See "Quick List" later in this chapter for more details.
.
18 Getting Started
1920 21 22 23
16
18
17
27
24
25
2628
Getting Started 19
ItemFunction
16. SIM card doorSlide open the QWERTY keyboard to open the SIM card door.
17. VOICE
COMMAND/VOICE
NOTES
18. Volume buttonsPress to turn the volume up or down.
19. Car Antenna
connector
20. Camera Lens
21. Self-portrait
mirror
22.
Speaker
23. Battery Cover
24. CAMERA
25 microSD slot
26 HTC ExtUSB™ port
27 Microphone
28 Strap Holder
To learn how to insert the SIM card, see "Inserting the SIM
Card" in this chapter.
Press to open the voice recognition program; Press and hold
to open the Voice Notes program where you can record your
voice.
Lets you attach your phone to the car antenna for better
network reception. Remove the back cover, then peel off the
rubber cap and connect the antenna jack.
Turn the back side of your phone to face yourself so that your
image reflects on the mirror when taking self-portrait shots.
Listen to audio media or a phone call when using
speakerphone mode.
Remove to insert battery.
Press to open the Camera program. If the Camera program is
already opened, press to take the photo or to start shooting
video.
Pry open the rubber cover to insert the microSD card.
Pry open the rubber cover to connect the USB cable to
synchronize data or recharge the battery. You can also
connect the earphone to listen to audio media or use the
phone’s hands-free kit.
Speak into the microphone when in a call or recording voice.
Lets you attach a strap to carry your phone. Loop the end of a
strap through this opening.
20 Getting Started
LED indicator lights
Various colors that might display in the two LED Indicators are summarized
here.
Left LEDStatus
Flashing blueBluetooth mode set to “On” or “Visible” mode.
Flashing greenConnected to Wi-Fi network.
Right LEDStatus
Solid greenBattery is fully charged.
BlankBattery case is empty, no SIM card inserted or phone is off.
Solid orangeBattery is charging or the phone is using ActiveSync to
Solid redBattery is not installed or battery is over-discharged.
Flashing greenConnected to the network.
Flashing redBattery very low (less than 10%).
Flashing orangeBattery temperature is hotter or colder than the functional
Orange/Green LED
off
synchronize with a PC.
limits of 0 to 48 degrees Celsius (32 to 118 degrees
Fahrenheit), and has stopped charging.
Battery fault. The “Battery Fault” indicator
( ) is displayed. In this case, the flashing green LED can
be recovered by unplugging the AC adapter.
Accessories
The following accessories are provided with the phone:
Getting Started 21
1
2
3
AccessoryFunction
1. AC adapterRecharge the phone battery.
2. USB cableConnect your phone to a PC to synchronize data and/or to
3.
Stereo headset
charge the phone.
Provide a volume control slider and a Send/End button. You
can press the button to pick up a call or put a call on hold or
press and hold the button to end the call. Plug into Earphone
Jack to listen to audio files.
22 Getting Started
1.2 Inserting the SIM Card
Your SIM (Subscriber Identity Module) card is given to you by your wireless service
provider and contains your basic subscriber information, such as your phone number
and your address book.
Before you begin, make sure the phone is turned off.
To insert the SIM card
1. Slide out the QWERTY keyboard.
2. Open the SIM card door by pulling it out and then flipping it open.
3. Insert the SIM card into the slot.
4. Close and lock the SIM card door. The SIM card door is locked when
you hear a “click” sound.
1
2
Notes
• The phone will not turn on if the SIM card door is not locked.
• Opening the SIM card door while the phone is turned on will turn off the
phone.
• DO NOT open the SIM card door while the phone is turned on.
3
4
1.3 Inserting the Battery
1. Slide the battery cover down
to remove it.
2. Align the exposed metal
contacts on the edge of the
battery with the prongs in the
body of the phone.
3. Push the bottom of the
battery into place and then
replace the battery cover.
1.4 Installing a microSD Card
1. Pry open the rubber cover of the
microSD slot on the right side of the
phone.
2. Insert the microSD card into the slot
with the gold contacts facing up and
then close the cover.
To remove the microSD card, press it to
pop it out of the slot.
NotemicroSD card is not included in the box.
Getting Started 23
2
3
2
1
24 Getting Started
1.5 Turning On and Off the Phone
Press and hold the POWER button for about
3 seconds to turn on or off the phone.
1.6 Home Screen
The Home screen displays important information, such as upcoming
appointments, status indicators, the current date, time, and profile, and
icons of programs that you have recently used.
• To access the Home screen from anywhere, press HOME.
8109
1
2
3
4
5
6
11
7
Displays the name of your wireless service provider, date, and the time.
1.
Click to open Comm Manager.
Select a recently-used program, and open it directly from the Home screen.
2.
Home Screen
12
Getting Started 25
Displays the current profile. Click to change the profile.
3.
Click to view the details of a missed call.
4.
Click to open the Messages folder.
5.
Displays the time of your next appointment. Click to open the Calendar
6.
program.
Click to display the available programs in your phone.
7.
Displays notifications, such as missed calls or new messages.
8.
Displays the network or connectivity status.
9.
Displays the power status.
10.
Displays the network signal strength.
11.
Click to open Contacts, Call History, or Messages.
12.
Use the NAVIGATION CONTROL to scroll down the Home screen to see more
information.
To learn about the different icons/notifications that you may see on the Title
bar of the screen, please see “Status Indicators” at the end of this chapter.
1.7 Programs On Your Phone
The following table lists icons of the programs that are already installed on
your phone or are available on the discs that came with your phone.
IconProgramDescription
ActiveSyncSynchronizes information between your phone and PC.
Adobe
Reader LE
Audio
Manager
Bluetooth
Explorer
View PDF files.
Browse for music files by organizing music files into
categories.
Searches for other Bluetooth devices that have file sharing
enabled and allows you to access their Bluetooth shared
folder.
26 Getting Started
IconProgramDescription
CalculatorDo basic arithmetic and calculations.
Calendar Keeps track of your appointments, and creates meeting
Call HistoryKeeps track of all phone calls made, received, and missed.
CameraCaptures photos in various modes.
Clear Storage Clears the memory and restores the phone back to factory
Comm
Manager
ContactsKeeps track of contact information.
File Explorer Organize and manage files and folders.
GamesPlay two games: Bubble Breaker and Solitaire come with
Internet
Explorer
Internet
Sharing
MessagingSend and receive e-mails, MMS and text messages.
MessengerConnect to the Windows Live Messenger service.
MIDlet
Manager
Office Mobile Lets you view Excel worksheets, PowerPoint files and Word
requests.
default settings.
A central switch where you can manage phone and
connection settings.
your phone.
Browse Web and WAP sites, and to download new
programs and files from the Internet.
Lets your phone act as an external modem for your
computer.
Download and install Java-based applications, such as
games and tools, on your phone.
documents with your phone
IconProgramDescription
Pictures &
Videos
Quick NotesType and save often used text messages.
Collects, organizes, and sorts media files.
Getting Started 27
SAPSettings Enables Bluetooth Remote SIM access on your phone. See
SettingsPersonalize your phone to suit the way you use it.
SIM Manager Manage the contacts that are stored on your SIM card. .
STK (SIM Tool
Kit) Service
Speed Dial
Task
Manager
TasksKeeps track of your tasks.
Video
Recorder
Voice NotesCreate short voice recordings.
Windows
Live
Windows
Media
chapter 2 for more details.
Access information and other services offered by your
wireless service provider.
Create speed dial entries for dialing frequently-called phone
numbers or for opening frequently-accessed programs
Keeps track of all running programs on your phone.
Captures video clips in various modes and duration.
Connect and use the Windows Live services.
Play back video and audio files.
.
28 Getting Started
1.8 Start Menu
Your phone comes with several bundled programs that you can start using
immediately. You can also install additional programs from the included
Windows Mobile® Getting Started Disc or from other sources and install
them on your phone.
To see the available programs on your phone
On the Home screen, click Start.
To see more programs, click More or
use the NAVIGATION CONTROL to scroll
down.
1.9 Quick List
The Quick List offers convenient access to a list of functions, such as locking
your phone and keypad, opening Comm Manager, and choosing a different
profile.
To access the Quick List
1. Briefly press (press and quickly release) the POWER button.
2. Select the desired option and click Select.
3. To exit the Quick List at any time, click Cancel.
1.10 Entering Information
You can enter text, numbers, and symbols using the keypad or QWERTY
keyboard. The status indicator on the top-right side of the display screen
displays the input mode that you are currently using.
Lowercase text input
Uppercase text input, caps lock
Uppercase text input
Numeric or symbol (labeled in blue color) input, locked (Keyboard only)
Numeric or symbol (labeled in blue color) input
XT9 text input mode, lowercase
XT9 text input mode, uppercase
XT9 text input mode, caps lock
Using the Keypad
Use the keypad to dial phone numbers or type short text messages.
To change the input mode
1. Press and hold the *T9 key.
2. On the menu, click the input mode you want.
Using Multipress mode
In Multipress mode, you enter a character by pressing the numeric key on
which the character appears.
To enter text in Multipress mode
• To enter the first character on the numeric key, press once. To enter
the second character on the numeric key, press twice, and so on.
• To enter character that are on the same numeric key, pause after you
enter the first character.
• To enter punctuation, press 1 repeatedly until you see the
punctuation you want.
Getting Started 29
30 Getting Started
To change the Multipress time out
You can change the length of time to pause between keypresses on the
same numeric key.
1. On the Home screen, click Start > Settings > Accessibility.
2. In Multipress time out, select the length of the pause between
keypresses.
Using XT9 mode
To form a word in XT9 mode, press the numeric keys that contain the letters
you want. As you enter letters, XT9 analyzes your keypresses and attempts
to complete the word. For example, to enter the word “shoe,” press 7, 4, 6, 3.
To enter text in T9 mode
1. Press and hold the *T9 key.
2. On the menu, click XT9 English.
3. Do any of the following to start entering text in XT9 mode:
• Enter letters by pressing the keys on which the letters appear.
• Press the _# key to enter a space after the word.
• To enter punctuation, press 1, and then select from the list at the
Using Numeric mode
If a text box permits a numeric entry only, such as a phone number, the
input mode automatically defaults to Numeric mode. However, if you need
to enter numbers within a line of text, change to Numeric mode, and then
change back to Multipress or XT9 mode to finish entering the text.
To enter numbers in text boxes
1. Press and hold the *T9 key to change to Numeric mode (12#).
2. On the keypad, enter the number or numbers you want.
3. Change back to Multipress or XT9 input mode by pressing and
holding the *T9 key, and then finish entering your text.
Press a key only once for each letter. If there is more than one
choice in the XT9 dictionary for your entry, a list of available words
is displayed at the bottom of the screen.
bottom of the screen.
Loading...
+ 70 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.