Htc TOUCH DUAL 16-KEY READ ME FIRST, TOUCH DUAL READ ME FIRST User Manual

90H00xxx-xxM Rev.A

Personalize Your Device

User Ma

ual

Read Me First

Screen

Protector

A. Change the Today screen background

Tap Start > Settings > Personal tab > Today.

B. Set the date and time

Tap Start > Settings > System tab > Clock & Alarms > Time tab.

C. Manage power settings

Tap Start > Settings > System tab > Power > Advanced tab.

Make a Voice or Video Call

Press the TALK button or while on the Today screen, open the 16-key hardware keypad.

Touch the keys on the Phone screen or use the keypad to enter the first few digits of a

phone number or the beginning letters of a contact name.

The Smart Dialing panel will display the matching phone numbers in Call History as

well as the matching contacts found on your device and SIM card. Select the number

or contact you want to call then press TALK. To make a video call, touch instead of pressing TALK.

For hands-free phone conversation, connect the USB stereo headset or a Bluetooth® headset (not included) to

Smart Dialing Panel

TALK Button

your device.

To learn how to connect a Bluetooth headset, refer to the User Manual.

Get E-mail On Your Device

Get e-mail messages on your device. Set up your device so you can send and receive e-mail messages using your favorite e-mail service.

Select this check box.

Tap Start > Messaging >

New E-mail Account.

Auto Setup downloads e-mail server settings automatically to

your device. Tap Next.

Note If Auto Setup is unsuccessful, you need to manually enter

Enter your E-mail

address and tap Next.

the settings in the succeeding screens.

Read Me First

This Read Me First will help you get started with using your Windows Mobile® 6 powered device. We recommend that you have this guide handy when you start using your device.

For a more complete reference, consult the User Manual that came with the device.

Secure Your Device

A. To enable the SIM PIN

Enabling the SIM PIN requires you to enter a PIN code first before you can use the phone features of your device.

You can enable the SIM PIN by tapping Start > Settings > Personal tab > Phone and selecting Require PIN when phone is used.

B. To enable the device password

Enabling the device password requires you to enter a password to unlock the device after it has been left idle for a set period of time.

1. Tap Start > Settings > Personal tab > Lock.

2. Select the Prompt if device unused for check box and enter the time you want.

3. Select the Password type.

4. Enter and confirm the password, then tap OK.

C. To enable the key lock

Enabling the key lock helps prevent accidental key presses when the device is in your pocket or bag.

Lock the keys by tapping the Launcher tab ( ) on HTC Home and then tapping .

To unlock, tap Unlock.

Take a Photo

Use the Camera of your device to capture those precious moments.

Press the CAMERA button.

The screen orientation automatically switches to landscape mode when you use the camera.

Press ENTER to

take the shot.

Tap to choose the resolution and other settings.

The photo will be saved to the My Pictures folder, unless you choose to delete it by tapping

after taking the photo. Tap if you want to send the photo via MMS or e-mail. Refer to the User Manual for more information about using the Camera.

Enter Your Name and

Account display name.

Tap Next.

You can also synchronize your device with your company’s Exchange Server so you can access your company e-mails.

Refer to the User Manual to learn how to get your company e-mails on your device.

Enter your User name

and Password for the e-mail account. Tap Next.

Choose how frequent

you want your device to automatically send and receive e-mail. Tap Finish.

What’s in the Box

These are the items that you should find inside the box.

www.htc.com

4 7

1. Touch Phone

2. Battery

3. Screen Protector

4. AC Adapter

5. USB Sync Cable

6. USB Stereo Headset

7. Read Me First and User Manual

8. Pouch

9. Getting Started and Applications Discs

10. Extra Stylus

Before Using Your Device

A. Remove the back cover

Hold the device in place with one hand and with your other hand’s thumb or finger, lift up the bottom of the back cover.

Lift from here.

B. Install the SIM Card

Insert the SIM card with the

Cut corner of SIM card

Pull back the red rubber cover.

gold contacts facing down and the cut corner on the outside

Close the red rubber door.

C. Install the battery

Install the battery by inserting it with its exposed copper part aligned with the protruding copper conductor on the lower-right side of the battery compartment.

Insert the bottom side of the battery first, then gently push the battery into place.

D. Replace the back cover

Copper conductor

Secure the top part of the back cover by “locking” it into 3 openings on the device.

Press the middle portion of the back cover

Press the bottom part of the back cover to lock it into place. You should hear a click.

E. Charge the battery

The battery is not fully charged out of the box. To charge the battery inside your device, connect the AC adapter plug to an electrical outlet and connect the USB end to the Sync connector on the left side of your device. The battery is fully charged after about 3 hours of charging.

F. Power on/o the device

Press and hold the POWER button for about 3 seconds to power on your device.

When powering off, a confirmation message will be displayed. Tap Yes to power off the device.

Quick Setup Wizard

When you power on your device for the first time, a Quick Start Wizard will guide you through touch screen calibration, provide a quick tutorial on stylus operation and pop-up menus, and allow you to set the date, time, and a device password.

Follow the on-screen instructions to complete the wizard.

Synchronize Your Device and Computer

Synchronize your device with your computer to keep information such as Outlook e-mails, contacts, tasks, and appointments up-to-date on your device.

Set up synchronization software on your computer

Depending on the Operating System of your Computer, you will need either Microsoft ActiveSync® 4.5 (or later) or Windows Mobile® Device Center to synchronize your device with your computer.

Set up ActiveSync on Windows XP

Install ActiveSync 4.5 on your computer

from the Getting Started Disc.

Connect your device to your computer.

The Synchronization Setup Wizard automatically starts and guides you to create a synchronization partnership. Click

Next to proceed.

Set up Windows Mobile Device

Center on Windows Vista®

Connect your device to your

computer. In Windows Mobile Device Center, click Set up your device.

The Touch Phone

Earpiece

Touch Screen

Talk

microSD™ card slot

16-key Keypad*

* Slide up the front panel to

reveal the keypad.

Second Camera

Navigation Control / ENTER

End

Camera button

HTC Home

HTC Home™ is a Today screen plug-in that gives you up-to-date local information at a glance, such as time, date and weather information, and shows new messages and missed calls. It also has a customizable launcher where you can add your favorite applications for one-touch access and a Profile selector where you can quickly change the profile or ring tone of your device.

TouchFLO™

TouchFLO™ gives you better touch panel experience on your

device. Using TouchFLO, you can easily scroll and pan the screen by sliding your finger on the touch panel. TouchFLO also has the Touch Cube where you can add your favorite contacts, access media, launch programs, and more.

Finger scrolling

While on a Web page, document, or list (such as contacts list, file list, etc.), slide your finger upward to scroll down; slide your finger downward to scroll up.

To scroll to the right, slide your finger to the left. To scroll to the left, slide your finger to the right.

Finger panning

Touch and hold on the touch screen and then drag your finger around the screen.

Touch Cube

To open the Touch Cube, slide your finger upward, starting from the bottom of the touch screen where it shows a logo image.

To close the Touch Cube, slide your finger downward.

Touch Cube is a three-dimensional, cubic user interface. To flip the interface from one side to another, slide your finger left or right on the touch screen.

Opening the Touch Cube

Configure Data Connections

When you start up your device with a SIM card installed, you see a notification message from the Connection Setup on the Today screen. Connection Setup can help you automatically set data connection settings such as GPRS/3G, MMS, and WAP. Setting up your GPRS/3G connection lets you surf the Web while on the go.

When you see the notification message from the Connection Setup, tap Yes.

Note If your SIM card supports multiple network operator profiles, a message will appear with network

profile choices. Select the profile you want to use and tap OK.

Connection Setup then starts to configure your device’s data connection settings.

After the Connection Setup completes the configuration, tap Restart.

Use Internet Explorer® Mobile (tap Start > Internet Explorer) to surf the Web.

To synchronize your device with your

computer, clear the Synchronize directly with a server running Microsoft Exchange check box and click Next.

Select the information types that you want

to synchronize, then click Next.

Choose whether to allow wireless

connections while your device is connected to the computer.

Click Finish.

Select the information you want to

synchronize and click Next.

Type a name for your device and click

Set Up.