THIS DEVICE IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE
BOX.
DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS
CHARGING.
YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER
WITH THE DEVICE’S OUTER CASING.
PRIVACY RESTRICTIONS
Some countries require full disclosure of recorded telephone
conversations, and stipulate that you must inform the person with
whom you are speaking that the conversation is being recorded.
Always obey the relevant laws and regulations of your country when
using the recording feature of your Pocket PC Phone.
COPYRIGHT INFORMATION
Microsoft, MS-DOS, Windows, Windows NT, Windows Server,
Windows Mobile, ActiveSync, Excel, Internet Explorer, MSN, Outlook,
PowerPoint, and Word are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
Important Health Information and Safety
Precautions
When using this product, the safety precautions below must be taken
to avoid possible legal liabilities and damages.
Retain and follow all product safety and operating instructions. Observe
all warnings in the operating instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage to
the equipment, observe the following precautions.
ELECTRICAL SAFETY
This product is intended for use when supplied with power from
the designated battery or power supply unit. Other usage may be
dangerous and will invalidate any approval given to this product.
SAFETY PRECAUTIONS FOR PROPER GROUNDING AND
CONNECTION
CAUTION: Improper grounding when connecting the product to an
associated equipment can result in a risk of electric shock.
This product is equipped with a USB cable for connecting the product
to a desktop or notebook computer. Be sure your computer is properly
grounded (earthed) before connecting the product to the computer.
The power supply cord of a desktop or notebook computer has an
equipment-grounding conductor and a grounding plug. The plug must
be plugged into an appropriate outlet which is properly installed and
grounded in accordance with all local codes and ordinances.
SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT
• Use the correct external power source
A product should be operated only from the type of power source
indicated on the electrical ratings label. If you are not sure of the
type of power source required, consult your authorized service
provider or local power company. For a product that operates
from battery power or other sources, refer to the operating
instructions that are included with the product.
• Handle battery packs carefully
This product contains a Li-ion Polymer battery. There is a risk of
fire and burns if the battery pack is handled improperly. Do not
attempt to open or service the battery pack. Do not disassemble,
crush, puncture, short external contacts or circuits, dispose of
in fire or water, or expose a battery pack to temperatures higher
than 60˚C (140˚F).
WARNING: DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED. TO REDUCE RISK OF FIRE
OR BURNS, DO NOT DISASSEMBLE, CRUSH, PUNCTURE,
SHORT EXTERNAL CONTACTS, EXPOSE TO TEMPERATURE
ABOVE 60˚C (140˚F), OR DISPOSE OF IN FIRE OR WATER.
3
4
REPLACE ONLY WITH SPECIFIED BATTERIES. RECYCLE OR
DISPOSE OF USED BATTERIES ACCORDING TO THE LOCAL
REGULATIONS OR REFERENCE GUIDE SUPPLIED WITH
YOUR PRODUCT.
SAFETY PRECAUTIONS FOR DIRECT SUNLIGHT
Keep this product away from excessive moisture and extreme
temperatures. Do not leave the product or its battery inside a vehicle
or in places where the temperature may exceed 60°C (140°F), such
as on a car dashboard, window sill, or behind a glass that is exposed
to direct sunlight or strong ultraviolet light for extended periods of time.
This may damage the product, overheat the battery, or pose a risk to
the vehicle.
SAFETY PRECAUTIONS FOR ACOUSTIC PRESSURE
CAUTION: Using earphones or headphones and
prolonged listening at high volume levels may cause
permanent hearing loss.
NOTE: For France, mobile headphones or earphones (manufactured
by Merry, model number EMC220-001) for this device have been
tested to comply with the Sound Pressure Level requirement laid down
in NF EN 50332-1:2000 standard as required by French Article L.
5232-1.
SAFETY IN AIRCRAFTS
Due to the possible interference caused by this product to an aircraft’s
navigation system and its communications network, using this device’s
phone function on board an airplane is against the law in most
countries. If you want to use this device when on board an aircraft,
remember to turn off your phone by switching to Flight Mode.
ENVIRONMENT RESTRICTIONS
Do not use this product in gas stations, fuel depots, chemical plants or
where blasting operations are in progress, or in potentially explosive
atmospheres such as fuelling areas, fuel storehouses, below deck on
boats, fuel or chemical transfer or storage facilities, and areas where
the air contains chemicals or particles, such as grain, dust, or metal
powders. Please be aware that sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
EXPLOSIVE ATMOSPHERES
When in any area with a potentially explosive atmosphere or where
flammable materials exist, the product should be turned off and the
user should obey all signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in bodily injury or even death.
Users are advised not to use the equipment at refueling points such
as service or gas stations, and are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots, chemical
plants, or where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often, but not always, clearly
marked. These include fueling areas, below deck on boats, fuel or
chemical transfer or storage facilities, and areas where the air contains
chemicals or particles, such as grain, dust, or metal powders.
ROAD SAFETY
Vehicle drivers in motion are not permitted to use telephony services
with handheld devices, except in the case of emergency. In some
countries, using hands-free devices as an alternative is allowed.
INTERFERENCE WITH MEDICAL EQUIPMENT FUNCTIONS
This product may cause medical equipment to malfunction. The use of
this device is forbidden in most hospitals and medical clinics.
GENERAL PRECAUTIONS
• Heed service markings
Except as explained elsewhere in the Operating or Service
documentation, do not service any product yourself. Service
needed on components inside these compartments should be
done by an authorized service technician or provider.
5
6
• Damage requiring service
Unplug the product from the electrical outlet and refer servicing to
an authorized service technician or provider under the following
conditions:
• Liquid has been spilled or an object has fallen into the
product.
• The product has been exposed to rain or water.
• The product has been dropped or damaged.
• There are noticeable signs of overheating.
• The product does not operate normally when you follow the
operating instructions.
• Avoid hot areas
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
• Avoid wet areas
Never use the product in a wet location.
• Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other
openings in the product. Slots and openings are provided for
ventilation. These openings must not be blocked or covered.
• Mounting Accessories
Do not use the product on an unstable table, cart, stand,
tripod, or bracket. Any mounting of the product should follow
the manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
• Avoid unstable mounting
Do not place the product with an unstable base.
• Use product with approved equipment
This product should be used only with personal computers and
options identified as suitable for use with your equipment.
• Adjust the volume
Turn down the volume before using headphones or other audio
devices.
• Cleaning
Unplug the product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning, but NEVER use water to clean the LCD screen.
7
8
Contents
Chapter 1 Getting Started 13
1.1 Getting to Know Your Device and Its Accessories ..... 14
1.2 About the USIM/SIM Card
1.3 Starting Up .....................................................................
1.4 The Today Screen ..........................................................
1.5 Using the Programs ....................................................... 26
1.1 Getting to Know Your Device and Its
Accessories
10
1
7
8
9
25346
16171815
11
12
13
14
19
Getting Started 15
No. ItemFunction
1Hardware Keyboard See Chapter 2 for details.
2Messaging ButtonPress to quick start your Messaging.
3Notification LED 1This LED shows a blinking Blue light for
4Notification LED 2This bi-color LED shows Green and Amber lights
5INTERNET
EXPLORER Button
6Second CameraUse this video camera for video call
7Jog WheelWhen in the Today screen or using applications,
8OK ButtonPress to confirm your data entries, or to exit the
9VOICE COMMANDPress to start Voice Speed Dial; press and hold to
10 Micro SD Card SlotIn this card slot, insert a Micro SD memory card
11 Touch ScreenTap the screen with the stylus to write, draw, or
12 VIDEO CALL Button After entering a phone number in the Phone
13 Left SOFT KEYPress to execute the command shown in the label
Bluetooth system notification of powered-up and
ready to transmit radio frequency signal, and a
blinking Green light for Wi-Fi status. When both
Bluetooth and Wi-Fi are enabled, their lights blink
alternately.
for UMTS/GSM standby, UMTS/GSM message,
UMTS/GSM network status, notification, and
battery charging status.
Press to launch Internet Explorer.
conversations.
scroll up or down to navigate through menus,
program instructions; press the wheel to carry out
selection. During a call or playing music, scroll
up or down to adjust the sound volume. When
receiving an incoming call, scroll down to silence
the audio notification.
program in use.
record a voice note.
for storing data, or insert a Micro SD input/output
card such as a network card.
make a selection.
program, press this button to start a video call.
above the button.
16 Getting Started
No. ItemFunction
14 Right SOFT KEYPress to execute the command shown in the label
15 START ButtonPress to open the Start menu.
16 TALK ButtonPress to answer an incoming call or dial a
17 Navigation Control/
ENTER
18 END ButtonPress to end a call or to return to the Today
19 OK ButtonPress to confirm your data entries, or to exit the
above the button.
number.
Press this multi-directional control up, down, left,
or right to move through menus and program
instructions; carry out the selection by pressing
the center button.
screen.
program in use.
20
Getting Started 17
2122 23
24
25
26
27
28
333230342931
18 Getting Started
No. ItemFunction
20 Car Antenna
Connector
21 Self-Portrait MirrorTurn the back side of your device to face yourself
22 Main CameraThis camera takes still photos and records video
23 Shooting Mode
Switch
24 Flash LightWhen turned on, it illuminates your subject and
25 POWER ButtonPress to turn off your device temporarily. This
26 COMM MANAGER
button
27 CAMERA ButtonPress to launch the camera; press again to take
28 StylusUse the stylus to write, draw, or select items on
29 Strap HolderIt lets you attach a strap for carrying your device.
30 Infrared PortIt lets you exchange file(s) or data with other
31 Battery Cover Latch Slide this latch to release the battery cover.
Connect your phone to the car antenna while in a
car to have better reception quality.
so that your image reflects on the mirror when
taking self-portrait shots.
clips. It provides two shooting modes: Normal
mode and Macro (close-up) mode.
Push the switch up for Normal mode or down for
Macro mode.
allows you to capture clear photos or video even
in a dark environment. It also flashes when a
photo is taken.
switches your device to sleep mode. To turn it off
completely, press and hold (for about 5 seconds).
You can still receive calls and messages even
when your device is in sleep mode. When you
turn off the device completely, all functions
including the phone will be unavailable for use.
Press to launch Comm Manager.
a photo or video clip, depending on the specified
capture mode.
the touch screen.
devices wirelessly.
Getting Started 19
No. ItemFunction
32 Sync Connector/
Earphone Jack
33 RESET ButtonWith the stylus, press the RESET button to soft-
34 MicrophoneSpeak into the microphone when receiving or
Use this connector to synchronize data by
connecting the provided USB Sync cable or to
recharge the battery via the provided AC adapter.
You can also connect the provided USB stereo
headset for hands-free conversation or for
listening to audio media.
reset your device.
making a phone call or voice recording.
Accessories
1
2
No. AccessoryFunction
1AC adapterConverts AC to DC for recharging the battery.
2USB Sync cableConnects your device to a PC and synchronize
data.
3Stereo headsetProvides a volume control slider and a Send/End
button. Press the Send/End button to pick up a call
or put a call on hold; press and hold the button to
end the call.
3
20 Getting Started
1.2 About the USIM/SIM Card and Battery
Always turn off your device before installing/replacing the battery
and USIM/SIM card. Follow the instructions in the Quick Start Guide
to install a 3G USIM (Uinversal IC Card) or a GSM SIM (Subscriber
Identity Module) card provided by your local network service provider
and to install the battery.
The USIM/SIM card contains your phone number, service details, and
phonebook/message memory. Your device supports both 1.8V and 3V
USIM/SIM cards. Some legacy SIM cards will not function within your
device. You should consult with your service provider for a replacement
SIM card. There may be fees for this service.
Your device contains a rechargeable Li-ion polymer battery. This
device is designed to use only manufacturer-specified original batteries
and accessories. Battery performance depends on many factors,
including your wireless service provider’s network configuration, signal
strength, the temperature of the environment in which you operate your
device, the features and/or settings you select and use, items attached
to connecting ports, and your voice, data, and other program usage
patterns.
Battery life estimates (approximations):
• Standby time: up to 200 hours for GSM; 180 ~ 250 hours for
UMTS.
• Talk time (Screen off): 4 ~ 5 hours for GSM; 2 ~ 4 hours for
UMTS.
Warning! To reduce risk of fire or burns:
• Do not attempt to open, disassemble, or service the battery
pack.
• Do not crush, puncture, short external contacts, or dispose of in
fire or water.
• Do not expose to temperatures above 60oC (140oF).
• Replace only with the battery pack designated for this product.
• Recycle or dispose of used battery as stipulated by local
regulation.
Getting Started 21
To check the battery power
Do one of the following:
• Tap the battery level icon ( ) on the Today screen.
• Alternatively, tap Start > Settings > Systems tab > Power.
PowerInformation
Charge the battery
New batteries are shipped partially charged. Before you start using
your device, it is recommended that you install and charge the battery.
Some batteries perform best after several full charge/discharge cycles.
You can charge the battery in two ways:
•
Connecting your device directly to an external power source.
• Connecting your device to a PC via the provided USB Sync
cable.
Low battery
When the low-battery warning appears, do the following:
• Immediately save your current data.
• Synchronize with your PC or connect the power adapter to
charge the battery.
• Turn off your device.
22 Getting Started
1.3 Starting Up
Turn your device on and off
To turn on your device, press the POWER button. When you turn on
your device for the first time, you are asked to complete a calibration
process. For more information, see “Calibrate the device”.
To turn off your device, press and hold the POWER button for a few
seconds. A message will then be displayed, prompting you whether or
not to turn off the device completely.
NoteQuickly pressing the POWER button turns off your device temporarily
and switches it to sleep mode. You will still be able to receive messages
and calls while your device is in sleep mode.
Calibrate the device
Calibrating the device screen involves tapping the center of a cross
with the stylus as the cross moves around the screen. This process
ensures that when you tap the screen with your stylus, the tapped item
is activated.
If your device does not accurately respond to screen taps, follow these
steps to re-calibrate it:
1. Tap Start > Settings > System tab > Screen.
2. On the General tab, tap Align Screen, then follow the on-screen
instructions to complete the calibration.
Calibrating the device
Getting Started 23
Manage screen settings
The device’s display has three orientation modes: Portrait, Landscape
(right-handed), and Landscape (left-handed). Portrait mode allows
you to get a better view or a better operation of certain programs, while
Landscape mode may be optimal for viewing lengthy files.
Portrait mode
• To change the orientation, tap Start > Settings > System tab >
Screen, and select the orientation you want.
• To smooth the edges of screen fonts for many programs, on the
ClearType tab, select the Enable ClearType check box.
• To increase the readability or to see more content on the screen,
on the Text Size tab, adjust the text size by moving the slider.
Landscape mode
24 Getting Started
1.4 The Today Screen
The Today screen displays important information, such as upcoming
appointments and status indicators. You can tap a section on the
screen to open the associated program.
• To access the Today screen, tap Start > Today.
• To customize the Today screen display, including the background
image, tap Start > Settings > Personal tab > Today.
1
6
7
8
9
10
11
12
13
2 3 4 5
14
1Tap to open the Start menu.
2Tap to view connectivity status.
3Indicates the radio signal strength. Tap
to configure the phone settings.
4Tap to adjust device/ringer volume.
5Displays the current time. Tap to
check the current date and upcoming
appointments.
6Displays the current date and time. Tap
to set up date, time, alarm, and more.
7Tap to set owner information.
8Your day at a glance with reminders.
Tap to open the related program: tasks,
messages, and appointments.
9Tap to lock or unlock device.
: locked; : unlocked.
10 Tap to open the MSN Sign-in screen
11 Tap to open Comm Manager.
12 Indicates the battery status. Tap to
open the Power Settings screen.
13 Tap to open Calendar.
14 Tap to open Contacts.
Getting Started 25
Indicators
The following are some of the status icons that you may see on the device.
IconDescriptionIconDescription
New e-mail or text messages;
SMS notification of voice mail
There are more notifications.
Tap the icon to view all.
Wi-Fi function enabled, but
device not connected to a
wireless network yet
Connecting to wireless
network (arrows moving);
Connected to wireless
network
Battery power is very low
Device is locked Device
is unlocked
26 Getting Started
The Start menu
The Start menu, located at the top left corner of the Today screen,
displays a list of programs. You can start a program by scrolling
through the programs list and then pressing ENTER, or by tapping a
program with the stylus.
1
2
3
4
5
6
1 Tap to switch to the Today screen.
2 Tap to start a program. The items
displayed in the Start menu can
be customized by tapping Start
> Settings > Personal tab >
Menus.
3 Tap to start a recently-used
program.
4 Tap to view and select more
programs that are installed on
your device.
5 Tap to change device settings.
6 Tap to see a Help topic for the
current screen.
1.5 Using the Programs
The following are some of the programs that are already installed on
your device.
IconDescription
ActiveSync Synchronizes information between your device and a
PC or the Exchange Server.
Calculator Lets you perform basic arithmetic and calculations, such
as addition, subtraction, multiplication, and division.
Calendar Allows you to keep track of your appointments and create
meeting requests.
Camera Snaps photos or shoots video clips with accompanying
audio.
ClearVue PDF Enables you to view PDF files on your device.
IconDescription
Comm Manager Allows you to manage the device’s connection
(including Wi-Fi, Bluetooth, and ActiveSync), disconnect data
services (such as GPRS), turn the phone on or off, switch to ringer/
vibration mode, and enable or disable the Direct Push function.
Contacts Allows you to keep track of your friends and colleagues.
Download Agent Provides information about the download status
and the downloaded content from the Internet.
Excel Mobile Creates new workbooks or lets you view and edit
Excel workbooks.
File Explorer Enables you to organize and manage files on your
device.
Games Lets you play two pre-installed games: Bubble Breaker
and Solitaire.
Help Enables you to see Help topics for a program on your device.
Internet Explorer Allows you to browse Web and WAP sites as well
as download new programs and files from the Internet.
Messaging Allows you to send and receive e-mail, MMS, and text
messages.
MIDlet Manager Enables you to download and install Java
applications, such as games and tools, on your device.
Notes Allows you to create handwritten or typed notes, drawings,
and recordings.
Phone Lets you make and receive calls, switch between calls, and
set up conference calling.
Pictures & Videos Lets you view, organize, and sort picture and
video files on your device or a storage card. Captured photos are
stored in the My Pictures folder, and video clips are saved in the My
Videos folder of your device.
Pocket MSN Lets you send and receive instant messages with your
MSN Messenger contacts, as well as access your hotmail account,
if you have one.
PowerPoint Mobile Lets you view PowerPoint slides and
presentations.
Search Enables you to search contacts, data, and other information
on your device.
Getting Started 27
28 Getting Started
IconDescription
SIM Manager Allows you to manage the contacts that are stored on
your SIM card. You can also use this program to copy SIM contents
to Contacts on your device.
STK (SIM Tool Kit) Service Allows you to access information and
other services offered by your wireless service provider.
Streaming Media Allows you to stream live or on-demand video.
Tasks Allows youto keep track of your tasks.
Terminal Services Client Allows you to log on a PC running
Terminal Services or Remote Desktop, and use all of the programs
available on that PC from your mobile device.
Voice Speed Dial Allows you to record voice tags so that you can
dial a phone number or launch programs simply by speaking a word.
Windows Media Player Lets you play back media files.
Wireless Modem Enables your.device as an external modem for a
computer via USB, Bluetooth, or infrared.
Word Mobile Lets you create, view, and edit Word documents.
ZIP Enables you to save memory and free up storage space on
your device by compressing files in the conventional ZIP format.
1.6 Device Settings
You can adjust the device settings to suit the way you work. To see
all available settings, tap Start > Settings, then tap the Personal,
System, and Connections tabs located at the bottom of the screen.
Personal tab
IconDescription
Buttons Assigns a program to a hardware button.
Input Sets options for each of the input methods.
Lock Sets a password for your device.
Menus Sets what programs will appear in the Start menu.
Owner Information Allows you to enter your personal information
on your device.
Phone Allows you to customize phone settings such as ring tone,
set a PIN number for your SIM card, and more.
Sounds and Notifications Enables sounds for events,
notifications, and more, and allows you to set the type of notification
for different events.
Today Allows you to customize the appearance and the information
to be displayed on the Today screen.
Voice Speed Dial Allows you to create voice tags for voice dialing
contacts and SIM contacts as well as for launching programs.
Getting Started 29
30 Getting Started
System tab
IconDescription
About Allows you to specify a name for your device. Also shows the
Windows Mobile version and copyright information.
Backlight Sets the backlight timeout and brightness.
Certificates Shows information about certificates that are installed
on your device.
Clear Storage Removes all your data and files from the memory
and resets your device to factory default settings.
Clock & Alarms Switches the device clock to the date and time of
your locale or to a visiting time zone when you're traveling. Alarms
can also be set at specified days and times of a week.
Device Information Shows information about the firmware version,
hardware, identity, and the duration of calls made on your device.
Error Reporting Enables or disables the device's error reporting
function. When this function is enabled and a program error occurs,
technical data about the state of the program and your computer will
be logged in a text file and delivered to Microsoft's technical support
if you choose to send it.
Key Lock Locks the buttons on your device except for the POWER
button when the device is in sleep mode. This ensures you will not
switch the device on by accident and consume unnecessary power.
Memory Shows the device memory allocation status and memory
card information. Also allows you to stop currently running programs.
Microphone AGC Adjusts the volume of your voice automatically
when you are recording.
Power Shows the current battery level. Also allows you to set the
timeout for turning off the display (switching device to sleep mode)
to conserve battery power.
Regional Settings Sets the regional language to use and the
format for displaying numbers, currency, date, and time on your
device.
Remove Programs Lets you remove programs that you installed
on your device.
Screen Allows you to change the screen orientation, re-calibrate
the screen, and change the screen text size.
Loading...
+ 176 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.