![](/html/31/3154/315494aa905ce84c5afaae62fb61e8afc48017e307b966436f074ad59d594494/bg1.png)
FA 400.2
OPERATING MANUAL
SHREDDER
Powerline FA 400.2
english
1.513.999.112 B – 08/2013
![](/html/31/3154/315494aa905ce84c5afaae62fb61e8afc48017e307b966436f074ad59d594494/bg2.png)
FA 400.2
Contents
1 Proper use, warranty .................................................................................................................3
2 Safety instructions .....................................................................................................................3
3 Overview ...................................................................................................................................4
4 Dimensions ...............................................................................................................................5
5 Transportation, installation ........................................................................................................6
6 Operating and display elements ...............................................................................................7
7 Start-up .....................................................................................................................................7
8 Malfunctions ..............................................................................................................................9
9 Maintenance and care ............................................................................................................10
10 Disposal / Recycling ................................................................................................................ 11
11 Scope of supply, accessories .................................................................................................. 11
12 Technical data .........................................................................................................................12
HSM (UK) Ltd.
14 Attwood Road / Zone 1
Burntwood Business Park
Burntwood
Staffordshire
WS7 3GJ
Tel. +44(0) 1543.272.480
Fax +44(0) 1543.272.080
info@hsmuk.co.uk
www.hsmuk.co.uk
HSM of America LLC
419 Boot Road
HSM GmbH + Co. KG
Austraße 1-9
88699 Frickingen / Germany
Tel. +49 7554 2100-0
Fax. +49 7554 2100 160
info@hsm.eu
www.hsm.eu
2 Powerline FA 400.2 08/2013
Downingtown, PA 19335
Tel. (484) 237-2308
(800) 613-2110
Fax (484) 237--2309
customerservice@hsmofamerica.com
info@hsmofamerica.com
www.hsmofamerica.com
![](/html/31/3154/315494aa905ce84c5afaae62fb61e8afc48017e307b966436f074ad59d594494/bg3.png)
FA 400.2
1 Proper use, warranty
The shredder is exclusively designed for destroying
paper and cardboard, as well as store cards, credit cards,
CD-ROMs and fl oppy disks. Its sturdy drive mechanism is
not damaged by paper clips and staples.
Our general business conditions are applicable. We provide a one year warranty for the document shredder. The
warranty period is 6 months when used in multiple shifts.
This warranty excludes wear, damage due to improper
handling, natural depreciation, and actions taken by third
parties.
Translation of the original operating instructions
2 Safety instructions
Danger:
It is prohibited to operate one only machine
of a combination-version machine.
The safety clearances are only guaranteed
with the combined document shredder and
HSM press.
Before using the machine for the fi rst time,
read the operating manual, and keep it for
later use and to pass on to any subsequent
users. Observe all safety instructions on to
the machine.
• Ensure that no unauthorised persons can access the
document shredder. When the machine is not in use,
it must be shut down and secured against unauthorised use. To do so, you can secure the mains switch
with a padlock when it is in the off position.
• Do not remove or modify safety devices which guarantee the safe operation of the machine. No platforms
or other raised surfaces may be placed near the
shredder if they encroach on the specifi ed safety
clearances.
• Make sure that the power plug is easily accessible.
• Carry out inspection and maintenance regularly.
• Switch off the shredder, disconnect the power plug
and call customer service in the following circumstances:
- Power cables or plugs are damaged
- Liquid has entered the shredder
- The shredder has been exposed to rain
- The machine does not work properly despite the
operating manual having been observed
- The shredder has been damaged
Danger of injury
Do not reach into the paper feed opening.
Splinters can cause injury
Before destroying credit cards and store
cards, CD-ROMs or fl oppy disks, you must
fi t a splinter guard (strip curtain, order no.
1.513.050.445).
Danger of injury during intake
Do not go near the paper feed opening with
long hair, loose clothing, ties, scarves, necklaces, bracelets etc.
Do not destroy any material which might
become tangled, such as tapes, binder ties
or foil.
The shredder may not be operated by anyone under 16 years of age. Do not leave the
document shredder switched on when it is
unattended.
Switch off the shredder and pull out the
power plug before moving or cleaning the
shredder, or any other task outside its normal scope of use.
Maintenance and service tasks may only be
performed by HSM customer service and
service engineers of our dealers.
Operating controls for your safety
Emergency stop button
In the event of danger, press the
emergency stop button immediately.
This switches off the shredder, and
stops the cutting block and feed belt.
Main switch (only Solo-version)
In the event of danger, turn the main
switch to “0”.
You can secure the main switch in
this position with a padlock to prevent
restarting.
08/2013 Powerline FA 400.2 3
![](/html/31/3154/315494aa905ce84c5afaae62fb61e8afc48017e307b966436f074ad59d594494/bg4.png)
3 Overview
FA 400.2
2
6
1
3
4
78 11
12
5
9
10
1 Main switch (only solo-version)
2 Keypad
3 Emergency stop button
4 Loading tray
5 Option: extra-wide work table
6 Left cover panel
7 Right cover panel
8 Intake conveyor,
paper feed opening
9 Front door
10 Braking swivel castors
11 Oiler on particle cut machines
12 Nameplate
4 Powerline FA 400.2 08/2013