HRS FH3 Service Manual

D6

1.25mm Pitch FPC/FFC Connector

FH3 Series

■Features

1. 1.25mm FPC and FFC DIP Connector

The contact pitch is 1.25mm.

2. Contact Reliability

This connector has high contact reliability for high voltage
contact.

3. Sixteen Types of Contact Numbers

This connector consists of 16 kinds of 6, 8, 9, 10, 12, 13, 14,
15, 15, 17, 18, 19, 20, 21, 22, 24, and 30 contacts.

■Product Specifications

Rating

Rated Current: 1A

Operating Temperature Range:-40~+85ç (Note 1)

Storage Temperature Range:-10~+60ç (Note 2)

Rated Voltage:

200V AC

Operating Humidity Range:Relative humidity, 90% max.

Storage Humidity Range:Relative humidity, 90% max.

(Not dewed) (Not dewed)

Applicable FPC

t=0.2~0.35 Tin plating

Note 1. Temperature rise included when energized
Note 2. This storage indicates a long-term storage state for the unused product before board mounted.

The operating temperature and humidity ranges are applied to the non-energized state after the connector has been installed
in the board.

Note 3. The above standards represent this series. The individual formal agreement should be based on the "Specification".

■Applications

HDD, facsimiles, printers, VTR, etc.

Item Specification Condition

1. Insulation Resistance 500Mø min. Measured at 500V DC

2. Withstand voltage Neither short or breakdown should occur 500V AC for 1 minute

3. Contact Resistance

20mø max.

Measured at 0.1A

π FPC conductor resistance included

4. Mechanical operation

Contact resistance: 40mø max.

30 cycles

No part should be broken, cracked or loosened

5. Vibration No part should be broken, cracked or loosened

Frequency: 10~55Hz and full amplitude 1.50mm in 3 directions for 2 hours, respectively

6. Shock No part should be broken, cracked or loosened

Acceleration: 490m/S2, duration: 11ms, sine half-wave: in 3 directions for 3 times, respectively

7.

Moisture Resistance in Steady State

Insulation resistance: 50Mø min.

Exposed to temperature 40ç and humidity 90~95% for 96 hours

5 cycles under conditions as follows;

8. Temperature Cycle No part should be broken, cracked or loosened Temperature: -55ç→+15~+35→+85→+5~+35ç

Time: 30→5 max.→30→5 max. for 5 minutes

查询FH3-04S-1.25DS供应商查询FH3-04S-1.25DS供应商

D7

■Ordering Information

■Material

Part Material Finish Remarks

Please determine the specific product. If needed, please select and order the product from the product No. as listed on
catalog page D8 and D9.

FH 3 - 17 S 1.25 DS (01)

qewrtyu

qSeries Name : FH
wSeries No. : 3
e

Number of Contacts :

4, 6, 8, 10, 12, 13, 14, 15, 16,
17, 18, 19, 20, 22, 24, 30

r

Contact alignment : Single

tContacts Pitch : 1.25mm
yContact Style : DS : Right angle type

DSA : Straight type

u

(

01): Tube

Insulator PBT Black UL94V-0

Contact Phosphor bronze Tin plating –––––––

Number of Contacts

Size

Unit: mm

A
B

3.75 6.25 8.75 11.25 13.75 15 16.25 17.5 18.75 20 21.25 23.75 26.25 28.75 36.25

6.25 8.75 11.25 13.75 16.25 17.5 18.75 20 21.25 22.5 23.75 26.25 28.75 31.25 38.75

4 6 8 10 12 13 14 15 16 17 18 20 22 24 30

Number of Contacts

Size

Unit: mm

A 2.5 5 7.5 10 12.5 15 15 17.5 17.5 20 20 22.5 25 27.5 35

4 6 8 10 12 13 14 15 16 17 18 20 22 24 30

■FPC ·FFC Dimensions

BPCB Footprints