HRS FH1 Service Manual

D2

2.54mm Pitch Miniature Connector for Flexible Board

FH1 Series

■Features

1. 2.54mm FPC and FFC Connector

The contact pitch is 2.54mm.

2. Contact Reliability

This connector assures high contact reliability for high voltage
contact.

3. Eighteen Types of Contact Numbers

This connector consists of 18 kinds of 8, 9, 10, 11, 12, 13, 14,
15, 15, 17, 18, 19, 20, 21, 22, 27, and 29 contacts.

■Product Specifications

Rating

Rated Current: 1A

Operating Temperature Range:_40~+85ç (Note 1)

Storage Temperature Range:_10~+60ç (Note 2)

Rated Voltage:

200V AC

Operating Humidity Range:Relative humidity, 90% max.

Storage Humidity Range: Relative humidity, 90% max.

(Not dewed) (Not dewed)

Applicable FPC

t=0.13~0.3 Tin plating

Note 1. Temperature rise included when energized
Note 2. This storage indicates a long-term storage state for the unused product before board mounted.

The operating temperature and humidity ranges are applied to the non-energized state after the connector has been installed
in the board.

Note 3. The above standards represent this series. The individual formal agreement should be based on the "Specification".

■Applications

HDD, facsimiles, printers, VTR, etc.

Item Specification Condition

1. Insulation Resistance 5000Mø min. Measured at 500V DC

2. Withstand voltage Neither short or breakdown should occur. 500V AC for 1 minute

3. Contact Resistance

20mømax.

Measured at DC 1A

π FPC conductor resistance included

4. Mechanical operation

Contact resistance : 40mø max.

30 cycles

No part should be broken, cracked or loosened

5. Vibration No part should be broken, cracked or loosened

Frequency: 10~55Hz and full amplitude 1.50mm in 3 directions for 2 hours, respectively

6. Shock No part should be broken, cracked or loosened

Acceleration: 490m/S2, duration: 11ms, sine half-wave: in 3 directions for 3 times, respectively

7.

Moisture Resistance in Steady State

Insulation resistance: 500Mø min.

Exposed to temperature 40ç and humidity 90~95% for 96 hours

5 cycles under conditions as follows;

8. Temperature Cycle No part should be broken, cracked or loosened Temperature: _55ç→+5~+35→85→+5~+35ç

Time: 30→10~15→30~10~15 minutes

9.

Resistance to Soldering heat

Neither appearance should be deformed nor contact remarkably loosened.

Automatic soldering: 260çœ for 10 seconds

D3

■Ordering Information

■Material

Part Material Finish Remarks

Please determine the specific product. If needed, please select and order the product from the product No. as listed on
catalog page D4 and D5.

FH 1 - 17 S -2.54 DS

qewrty

qSeries Name : FH
wSeries No. : 1
e

Number of Contacts

: 6, 8, 9, 10, 11, 12, 13, 14, 15,

16, 17, 18, 19, 20, 21, 22, 27, 29

r

Contact alignment

: Single

tContacts Pitch : 2.54mm
yContact Type : DS: Right angle type

DSA : Straight type

Insulator PBT Black UL94V-0

Contact Phosphor bronze Tin plating –––––––

■FPC ·FFC Dimensions

Number of Contacts

Size

Unit: mm

A
B

10.16 17.78 20.32 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 50.80 53.34 66.04 71.12

15.29 22.91 25.45 27.99 30.53 33.07 35.61 38.15 40.69 43.23 45.77 48.31 50.85 53.39 55.93 58.47 69.90 76.25

5 8 9 101112131415161718192021222729