HRS DIN41612 Service Manual
A27
Product Compliant to DIN41612/IEC603-2 Standard
PCN Series
Pin Header Side
●Straight through hole type
Receptacle Side
●Straight through hole
PCN10EA-* *S-2.54DSA
PCN10CA-* *S-2.54DSA
PCN10EA-* *S-2.54DSA
PCN10DA-* *S-2.54DSA
PCN12EA-* *S-2.54DSA
PCN12EA-* *S-2.54DSA
PCN13EA-* *S-2.54DSA
●Stacking through hole type
●
Right angle through hole type (mounted on the board edge)
●Right angle through hole type (mounted on the board)
●Press fit type
●Wrapping type
PCN10EA-* *S-2.54W*
●
Right angle through hole type (mounted on the board edge)
PCN10BA-* *S-2.54DS
●Right angle through hole type (mounted on the board)
PCN10AE-* *S-2.54DS
PCN10CA-* *S-2.54DS
PCN13EA-* *S-2.54DS
●Press fit short pin type
PCN11-* *S-2.54PFB-2
●Press fit long pin type
PCN11-* *S-2.54WB-2
●Cable type
PCN10-* *S-2.54C+PCN10-* * * *SC*
PCN10-* *S-2.54R
PCN10EA- * *P-2.54DSA
PCN10H* - * *P-2.54DSA
PCN10EA-* *P-2.54DS
PCN12EA-* *P-2.54DS
PCN12EA-* *P-2.54DS
PCN10AE-* *P-2.54DS
PCN10EA-* *P-2.54DS
PCN12AE-* *P-2.54DS
PCN12EA-* *P-2.54DS
PCN11-* *P-2.54W* -2+PCN11-* *P-2.54H-2
查询PCN12-010S-2.54DSA供应商
A70
BApplication Pattern
■Circuit Protection Function Type
●2-row type ●3-row type
' :Mounting hole center
C.L. :Center line
■Stacking Connector
*G : 35, 30, 25, 45, 40
' :Mounting hole center
C.L. :Center line
64 contacts :
The sequential contacts
are indicated at 22
points to contact No.1 to
4 and 26 to 32 in both
rows a and b.
100 contacts :
The sequential contact
is indicated at 22 points
to contact No.1 to 4 and
44 to 50 in both rows a
and b.
The sequential contacts are
located at 22 points to a1
and a32.
A28
Pin Header Side
●Right angle through hole type (mounted on the board edge)
Receptacle Side
●Straight through hole type
PCN10FA-* *S-2.54DSA
■Coaxial Connector and High Current Contact Composite Type
●Right angle through hole type (mounted on the board)
●Wrapping type
PCN10FA-* *S-2.54W*
●Right angle through hole type (mounted on the board edge)
PCN10FB-* *S-2.54DS
●Right angle through hole type (mounted on the board)
PCN10FA-* *S-2.54DS
●Press fit short pin type
PCN11F-* *S-2.54PFB-2
●Press fit long pin type
PCN11F-* *S-2.54WB-2
Circuit Protection Function Type
Pin Header Side
●Right angle through hole type
Receptacle Side
PCN10MC*-* *P-2.54DS
●Straight through hole type
PCN10MC*-* *S-2.54DSA
●Wrapping type
PCN10MC*-* *S-2.54W*
PCN10F-* *P-2.54DS
PCN10FA-* *P-2.54DS
A29
■Features
1. Compliant with DIN Standard
Comply with IEC603-2/DIN41612 standard.
2. Variation in number of contacts
10, 16, 20, 24, 28, 30, 32, 44, 48, 50, 64, 90, 96, 100, 128, and
144 contacts are available.
3. Two point contact construction
PCN10 and 12 series are constructed with high reliable doublesided two point contacts.
PCN13 series pursues after cost performance, and constructed
with single sided two point contacts.
4. Broad applications
DIN standard types of B, C, R, and Q are available. The flux tight
product is available. The easy lock pin type to prefix the board is
available.
5. Stacking height variation
PCN10H series contains 25, 30, 35, 40 and 45mm stacking
height.
6. Circuit protection function available
PCN10MC series utilizes a sequence structure for circuit
protection function.
7. Cable connector
ID connector for ribbon cable is available.
The connector is prepared for crimping connection for AWC#26
to 30 cables.
■Application
Control equipment, exchange, measuring instruments etc.
Single-sided two point Contact System
Stacking Connector
Double-sided two point Contact System
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,Wrapping Type)
PCN Series
A30
■Product Specifications
■Ordering Information
PCN10 A – * P – 2.54 DS
■Material
1 2 43 5 6
100V DC
1000V AC (insulation displacement, crimping type: 650V AC) /1 minute.
0.1A
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
500 cycles
Manual soldering: 300ç for 3 seconds
106M ohms
No flashover or insulation breakdown.
20m ohms max.
No electrical discontinuity of 10µs or more
Insulation resistance : 10
6
M ohms min.
Contact resistance : 20m ohms max.
No deformation of components affecting performance.
No damage, cracks, or parts looseness.
(-65ç : 30 minutes→15 to 35ç: 5 minutes max.→
125ç : 30 minutes→15 to 35ç: 5 minutes max.) 5 cycles
1.Insulation Resistance
2.Withstanding Voltage
3.Contact Resistance
4.
Vibration
5.
Humidity(Steady state)
6.Temperature Cycle
7.
Durability (Mating/un-mating)
8.
Resistance to Soldering heat
Item Specification Condition
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Parts Material Finish Remarks
Contact
Insulator
Pin header
Receptacle
PBT
Brass
Copper alloy
Gray
Contact area: Gold plated
Remainer: Tin-lead plated
UL94V-0
---------------
---------------
Rating
Current rating: 2A
Voltage rating:
300V AC
Operating Temperature Range: -55 to +85ç (Note 1)
Operating Humidity Range: 85% max
Storage Temperature Range: -10 to +60ç (Note 2)
Storage Humidity Range: 40 to 70%
(Note 2)
●PCN 10 Series
Series Name : PCN10
Blank
A mold type (as listed below)
B
C : Flux prevention type (DSA only)
D : Rack installation type
EA : With Board prefixed lock pin
H : Stacking height 35mm type
HA : Stacking height 30mm type
HB : Stacking height 25mm type
HC : Stacking height 45mm type
HD : Stacking height 40mm type
MC : Circuit Protection function type
Connector type : P : Pin header
: S
: Receptacle
Contact pitch : 2.54mm
Contact type
DS : Right angle through hole type
DSA : Straight through hole type
WA : Wrapping type (0.5tx0.7W)
WB : Wrapping type (0.5tx0.5W)
R : Insulation displacement type
C : Crimping type
Number of contacts: 2-row : 16, 20, 24, 32, 44, 50, 64, 90, 100
3-row : 48, 96, 144
4-row : 128
1
2
3
4
5
6
}
*
*
A31
PCN12 A - * P - 2.54 DS
1 2 43 5 6
PCN12 E - * S - 2.54 DSA
1 2 43 5 6
PCN13 E - * S - 2.54 DSA
1 2 43 5 6
*PCN13 series are only socket type.
PCN10 and 12 series are mating connectors.
●PCN 12 Series (Plug)
●PCN 12E-*S-2.54 DSA(Socket)
r S : Socket
t Contact pitch : 2.54mm
y Contact type : DSA: Straight through hole type
q Series name : PCN12
w No symbol : Standard type
E
: With board prefixed lock pin type
e
Number of contacts
: 2-row: 10, 16, 20, 28, 32, 44, 50,
64, 90, 100
3-row: 96
●PCN 13E-*S-2.54 DSA (Socket)
e
Number of contacts
: 2-row: 10, 16, 20, 24, 28, 32, 44,
50, 64, 90, 100
3-row: 96
r P : Plug
t Contact pitch : 2.54mm
y Contact type :
DS:
Right angle through hole type
q Series name : PCN12
w No symbol :
DIN standard type C (96 Contacts)
A : Original type
E-EA : With board prefixed lock pin type
r S : Socket
t Contact pitch : 2.54mm
y Contact style : DS:
Right angle through hole type
: DSA: Straight through hole type
q Series name : PCN13
w No symbol : Standard type
E : With
board prefixed easy pin type
e
Number of contacts
: 2-row: 10, 16, 20, 30, 32, 44, 50,
64, 90, 100
3-row: 48, 96
Loading...