HRS DF19 Service Manual
1
DF19 Series
NEW
2000.5
Drawing of mated connectors
on a DF19G -
*
P-1H board
For connection
of cables
On-board type Offset type Reverse offset type
For connection
of FPC
For connection of
fine coaxial cables
■Features
1. Ultra Low Profile
FPC type: Max. 1.7 mm thick
Discrete Wire & Coaxial 1.5 mm thick
2. SMT HEADERS Suit all Sockets
Each header can connect to three different sockets (cable, FPC,
and fine coaxial cable type.
(Note: Fine coaxial cable type is under development.)
3. Standardised Outer Dimensions
The three sockets have the same outside dimensions to allow
complete Flexibility.
4. Many Variations
There are headers of the on-board, offset, and reverse offset types
to accommodate all designs.
5. Connection to a Metal GROUND Plate
Ground lines can be connected to a metal shell for shielding.
■Application
LCDs, notebook personal computers, small OA machines, and small consumer products
1 mm-Pitch Low Profile Connector System for Wire to PCB Applications
Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable.
Drawing of mated connectors
on a DF19K-
*
P-1H board
Drawing of mated connectors
on a DF19L-
*
P-1H board
Drawing of mated connectors
on a DF19KR-
*
P-1H board
查询DF19-2830SCFA供应商
2
■Product Specifications
■
Material
Rating
Rated current
Rated voltage
AWG#28 : 1A
AWG#30 : 0.5A
AWG#32 : 0.3A
FPC : 0.5A
Fine coaxial cable AWG# 40: 0.3A
AC100V
Operating temperature range
Operating humidity range
Storage temperature range
Storage humidity range
-35~85ç Note 1
-35~85ç Note 2
-20~80%
-10~60ç Note 2
-40~70%
Measure at DC100V.
300 V AC, applied for one minute.
Measure at 100 mA.
Measure with a steel pin with thickness of 0.2±0.005.
Frequency: 10 Hz to 55 Hz, amplitude of 0.75 mm in 3 directions, 2h
Temperature of 40±2–C, humidity of 90% to 95%, duration 96h
(-55-C: 30 min -> 5
-
C to 35-C: 10 min -> 85
-
C: 30 min -> 5
-
C to 35-C: 10 min ) 5 cycles
50 mechanical-operation cycles
Reflow: At the recommended temperature profile, manual soldering: iron temperature 300
-
C for 3s
500MW or more
No flashover or breakdown
30mW or less (50mW or less for FPC)
M
IN
0.2N(20gf
)
,
MAX 3N(300gf
)
No electrical discontinuity for 1µs or more
Contact resistance: specified value or less, insulation resistance: 500MW or more
Contact resistance: specified value or less, insulation resistance: 500MW or more
Contact resistance: specified value or less
No melting of resin portion, which affects performance
1.
Insulation resistance
2.Voltage proof
3.
Contact resistance
4.
Insertion-Extraction Force
(per Contact)
5.Vibration
6.Damp heat
7.
Temperature Cycling
8.
Mechanical operation
9.
Resistance to soldering heat
Item Specification Conditions
Note1: Tinning is Whisker free
UL standard
UL94V-0
----------
----------
UL94V-0
----------
----------
UL94V-0
----------
----------
UL94V-0
----------
----------
----------
Product Part Material Color / Finish
Pin header
Socket
Crimp-Contact
FPC socket
Ground plate for FPC
Socket for fine coaxial cables
Ground plate for fine coaxial cables
Insulation
Terminal
Ground Plate
Insulation
Ground Plate
Terminal
Insulation
Terminal
Ground Plate
Insulation
Terminal
Ground Plate
Ground Plate
Polyamide resin
Phosphor bronze
Phosphor bronze
Polyamide resin
Stainless steel
Phosphor bronze
Polyamide resin
Phosphor bronze
Stainless steel
LCP resin
Phosphor bronze
Phosphor bronze
Phosphor bronze
Grey
Selective Gold Plating
Tin Plated
Grey
Tin Plated
Gold Plated
Grey
Selective Gold Plating
Tin Plated
Grey
Selective Gold Plating
Tin Plated
Tin Plated
Note1: Includes the temperature rise due to current flow.
Note2: The term storage refers to unused products prior to PCB mounting that is being stored for long periods.
The operating temperature and humidity range are applicable to connectors not carrying current. After PCB assembly or
temporary storage during transportation.
Note3:
The aforementioned specifications are representative of this series. For information on specific parts, confirm with Sales Office.
3
■Part Number Construction
DF 19 # -
**
P - 1 H
1 4 5 62 3 7
DF 19 # -
**
S - 1 F - GND
1 4 5 62 3 7 8
Series Name : DF
Profile :
■Pin header
G :
On-board type (1.65 mm from the board)
K :
Offset type
(1.0 mm from the board)
L :
Offset type (1.1 mm from the board)
KR : Reverse offset type of DF19K
(1.0 mm from the board)
■Crimp socket
None : Without grounding shell
G :
With grounding shell (protected for EMI)
■FPC socket
G :
Specification for connection with ground
shell
■Ground plate for FPC
G :
Specification for connection with ground
shell
■Socket for coaxial fine cables
G :
Specification for connection with ground shell
■Ground plate for fine coaxial cables
G :
Specification for connection with ground shell
1
Number of contacts: 8,14,20,30... (Note 1)
2
3
4
Series No. : 19
5
Connector type
S : Single row socket
P : Single row pin header
Contact pitch : 1mm
Wiring type / terminal profile
H : Right angle SMT
C : Crimp socket
F : FPC socket
SD : Socket for fine coaxial cables
Part for installation
GND : Ground plate (Note 2)
(Note 1) Be careful, as the number of contacts differ depending on the profile.
(Note 2) The FPC and coaxial fine cable types always use a ground plate.
Symbol
2830 : AWG#28~30
3032 : AWG#30~32
Type
SCF :
Socket contact reel Packaging
Plating
A : Gold plating
Specification
None : 10 000 pieces per reel
41 : 20 000 pieces per reel
The type name DF19 represents a specific product specification.
To order a product, specify the type from pages 4 to 9.
●Connector
DF19 - 2830 SCF A
(
** **
)
3
3
1
1
2
2
4
●Terminal
6
7
8
4
4
■Right Angle Pin Header (SMT)
(On-board Type)
B
Recommended PCB Layout
,
,
Note1: Masked area (hatched). Pattern in this area must be protected by resist.
Specification No.
* *
,
(
* *
)
(59)
: Gold plating, Tape and reel packaging
HRS No.Product No. Number of poles A B C
Width of emboss
Remarks
CL685-0021-0-* *
CL685-0004-0-* *
CL685-0006-6-* *
CL685-0015-7-* *
DF19G-18P-1H
(
* *
)
DF19G-14P-1H
(
* *
)
DF19G-20P-1H
(
* *
)
DF19G-30P-1H
(
* *
)
8
14
20
30
11.55
17.55
23.55
33.55
7
13
19
29
11.95
17.95
23.95
33.95
24
44
44
44
1.65 mm from the
board
Unit: mm
Assembled Header
Note1: Specify the number of reels to order tape and reel packaging (1 000 pieces per reel).
,,,,,,,,,,
,,,,,,,,,,
Loading...