HRS DF16 Service Manual
A308
0.5mm Pitch SMT Board to Board Connector
DF16 Series
■Features
1. Miniaturizing and Slimming
In addition to 0.5mm pitch miniaturization, board to stacking height of 2mm and 2.5mm are prrovided.
2. High Contact Reliability
The bellows female contact has a sufficient spring characteristic despite the low profile, and achieves high contact reliability.
3. Click Sensitivity In Mating
The click feeling is considered to facilitate insertion check when the connector is mated.
4. Metal Fitting Available
The metal fitting to prevent the solder peel is provided, considering the mounting on FPC.
5. Corresponding to Automatic Mounting
The connector has the vacuum pick-up area, and enables the automatic mounting with the embossed tape packaging.
Connector specification with no boss and no fitting is also.
Note1: The stacking height doesn't include the solder paste thickness.
Receptacle commonly uses DF16#-*DS-0.5V.
■Applications
Mobile phone, LCD(Liquid Crystal Display), and so on
Correspond to Automatic Mounting
The vacuum pick-up area is prepared for automatic
mounting machine.
Header Product Name Stacking Height
DF16
#
(
2.0
)
-*
DP-0.5V 2.0mm
DF16
#
(
2.5
)
-*
DP-0.5V 2.5mm
A309
Note1: For the 80 contacts connector, the stacking height 2.0mm product only is available.
For the 14 and 34 contacts connectors, the stacking height of 2.5mm product only is available.
■Product Specifications
Note 1: Temperature rise included when energized
Note 2: This storage indicates a long-term storage state for the unused product before the board mounted.
The operating temperature and humidity ranges are applied to the non-energized state after the connector has been installed
to the board.
Note 3: The above standards represent this series. Individual formal agreement should be based on the "Specification".
Rating
Rated Current : 0.3A
Operating Temperature Range
:
–35~+85ç(Note 1.)Storage Temperature Range : –10~+60ç(Note 2.
)
Rated Voltage : 50V AC Operating Humidity Range : 40~80% Storage Humidity Range : 40~70% (Note 2.
)
■Material
Item Specification Condition
1. Insulation Resistance 500Mø min Measured at 100V DC
2. Withstand voltage Neither short or insulation breakdown 150V AC for 1 minute
3. Contact Resistance 50mø max Measured at 100mA
4. Vibration Electrical discontinuity, 1µ S max.
10~55Hz and single amplitude 0.75mm in 3 directions for 2 hours, respectively.
5. Moisture Resistance
Contact resistance: 50mø max.Insulation resistance:250Mø min.
Exposed to temperature 40±2ç and humidity 90~95% for 96 hours
6. Temperature Cycle
Contact resistance: 50mø max.:
Insulation
resistance: 500Mø min.
(-55ç: 30 minutes 5~35ç: 10 minutes
(-85ç: 30 minutes 5~35ç: 10 minutes) 5 cycles
7. Operating Life Contact resistance: 50mø 50cycle
8.
Resistance to Soldering heat
No resion area fusion to degrade performance
SMT Type
Reflow
According to the recommended temperature profile
Manual soldering
Soldering iron temperature: 300ç for 3 seconds
Product Part Material Treatment UL Standard
Insulator Polyamide resin White Beige (Natural)
UL94V-0
Receptacle Contact Phosphor copper Gold plating –––––––
Metal fitting Brass Solder plating –––––––
Insulator Polyamide resin White Beige (Natural)
UL94V-0
Header Contact Phosphor copper Gold plating –––––––
Metal fitting Brass Solder plating –––––––
DF 16
##(ππππ
)
-
**
DS - 0.5 V
(
**,**
)
qrewtyuio
■Ordering Information
Please determine the specific product. If needed, please select and order products from the product No. as listed on catalog page
A310~A315.
●Receptacle/Header
q Series Name : DF
w Series No. : 16
e Type Symbol
r Product height
Receptacle : None
Header : 2.0, 2.5
t Number of Contacts
14, 20, 30, 34, 40, 50, 60, (80)
(
Note1
)
y Connector Type
DS : Double-row receptacle
DP : Double-row header
u Contact Pitch
: 0.5mm
i Contact Type
V : Straight SMT
o Pakaging Type
(50)
: Gold plating, embossed tape packaging
(51)
: Gold plating, tube packaging
Symbol Fitting
Boss
None
KK
A
∞
K
B
K
∞
C
∞∞
Loading...