HRS DF14 Service Manual

B177

1.25mm Pitch Super Low profile Crimping Connector

DF14 Series

■Features

1. Super Low Profile

This is a connector special for right angle which has pursued a low
profile on the board.
Board mounting height:

2.5mm

A signal can be fetched from the area where there is no board to
board space.

2. Correspond to Automatic Mounting

The header has the vacuum mount face which enables the vacuum
absorption and the automatic mounting by the embossed tape
packaging.

In addition, the tube packaging can be selected.

3. Four Wall Type Without Friction to Board by Socket

The header has the box structure to prevent from being twisted and
has the perfect mis-insertion prevention method. Moreover the
header has the wall on the board side and doesn't have any trouble
resulted from the friction to board by socket.
In addition, the metal fitting is attached to prevent the solder peel.

■Applications

LCD, Note PC, Mobile Terminal Small business equipment, Video camera

Board Mounting Figure

1

查询DF14-10P-1.25C供应商

B178

●Contact

Series Name: DF14
Number of Contacts: 2 to 10, 15, 20, 25, 30
Connector Type
S: Single row socket
P: Single row pin header

Contact Pitch: 1.25mm
Contact Type
C: Crimping socket
H: Right angle SMT

Applicable cable size
2628: AWG26 to 28
3032: AWG30 to 32

Packaging Type
SCF: Socket contact/reel
Plating Type
Blank: Tin plated
A: Gold plated

DF14 - 2628 SCF A

1 2 3

1 4

52

3

2

3

■Product Specifications

Current rating 1A
Voltage rating 150V AC

Operating Temperature Range-25 to +85ç (Note 1)
Operating Moisture Range 40 to 80%

Storage Temperature Range -10 to +60ç (Note 2)
Storage Moisture Range 40 to 70%

Item Specification Condition

1. Insulation Resistance 500M ohms Min 100V DC

2. Withstanding voltage No flashover or insulation breakdown. 500V AC/1 minute

3. Contact Resistance 30m ohms Max 100mA

4.

Insertion/Extraction Force

MIN0.15N (15gf), MAX3N (300gf) Measure at the square steel pin of 0.3±0.002mm

5. Vibration No electrical discontinuity of 1µs or more

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.

6.

Humidity (Steady state)

Contact resistance: 30m ohms Max Insulation resistance:500M ohms Min

96 hours at temperature of 40ç and humidity of 90% to 95%

7. Temperature Cycle

Contact resistance: 30m ohms Max Insulation resistance: 500M ohms Min

(-25ç: 30 minutes➝5 to 35ç: 10 minutes➝85ç: 30 minutes➝
5 to 35

ç

: 10 minutes) 5 cycles

8.

Durability (Mating/un-mating)

Contact resistance: 30m

ohms

Max Tin plating: 30 cycles Gold plating: 50 cycles

9.

Resistance to Soldering heat

No deformation of components affecting performance.

Reflow: At the recommended temperature profile

Manual soldering: 300ç for 3 seconds

Rating

Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and

Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

Note . Hirose’s tin plating product takes measures against whisker.

■Material

Product Part Material Finish Remarks

Crimping Socket Insulator Polyamide Beige UL-94V-0

Crimping Contact for Socket

Contact Phosphor Copper

Tin-lead plated or gold plated

–––––––

Insulator Polyamide Beige UL-94V-0

Pin Header Contact Brass

Tin-lead plated or gold plated

–––––––

Fitting Phosphor copper Tin-lead plated –––––––

■Ordering Information

●Connector

1

DF14 - * S - 1.25 C

1 2 3 4 5