HRS DF12 Service Manual
A297
0.5mm Pitch SMT Board to Board Connector
DF12 Series
■Features
1. Broad Variations of Stacking Height
In addition to 0.5mm pitch ultra-miniature size connector, the stacking height of 3mm, 3.5mm, 4mm, and 5mm are provided.
Note 1 :
(**)
of the product name DF12#
(**)
indicates the stacking height.
Note 2 : The stacking height doesn't include the soldering paste thickness.
[
Stacking Height Variation
]
2. Corresponding to Automatic Mounting
The connector has the vacuum pick-up area to enable automatic mounting with the embossed tape packaging.
3. Metal Fitting Available
The product including the metal fitting to prevent solder peeling is provided, considering the mounting on FPC.
■Applications
Mobile phone, LCD(Liquid Crystal Display), MO(Optical Disk), Note PC
Header/Receptacle DF12#(3.0)-*DS-0.5V DF12#-*DS-0.5V
Combination
stacking height
Combination
stacking height
DF12#(3.0)-*DP-0.5V 3.0 –––––––
DF12#(3.5)-VDP-0.5V ––––––– 3.5
DF12#(4.0)-*DP-0.5V ––––––– 4.0
DF12#(5.0)-*DP-0.5V ––––––– 5.0
Stacking Height 3.0mm 3.5mm 4.0mm 5.0mm
20 contacts KKKK
30 contacts KKKK
32 contacts K
––––––– ––––––– –––––––
Number of Contacts
38 contacts KKKK
40 contacts KKKK
50 contacts KKKK
60 contacts KKKK
Correspond to automatic mounting
The vacuum pick-up area secures the automatic mounting
machine for pick and place.
A298
■Product Specifications
Rating
Rated Current 0.3A
Operating Temperature Range
-45~+125ç Note 1.
Storage Temperature Range
-10~+60ç Note 2.
Rated Voltage 50V AC
Operating Humidity Range
-40~80% Storage Humidity Range -40~70%
Note 1: Temperature rise included when energized
Note 2:
This storage indicates a long-term storage state for the unused product before the board mounted.
The operating temperature and humidity ranges are applied to the non-energized state after the connector has been installed to the board.
Note 3: The above standards represent this series. Individual formal agreement should be based on the "Specification".
■Ordering Information
■Material
Product Part Material Finish Remarks
Please determine the specific product. If needed, please select and order products from the product No. as listed on catalog
page A299~A305.
DF 12 #
(
ππ
)
- * DS - 0.5 V
(
**
)
qw ret i oyu
DF 12 #
(
ππ
)
- * DP - 0.5 V
(
**
)
q Series Name : DF
w Series No. : 12
e Type Symbol
r Stacking height
3.0 : 3.0mm
None : 3.5~5.0mm
t
Number of Contacts : 20, 30, 32, 36, 40, 50, 60
(The 32 contacts connector includes the
stacking height 3mm only.)
y Connector Type
DS : Double-row receptacle
u Contact Pitch : 0.5mm
i Contact Style
V: Straight SMT
o Packaging Type
(81) : Embossed tape packaging
Item Specification Condition
1. Insulation Resistance 500ø min. Measured at 100V DC
2. Withstand voltage Neither short or insulation breakdown 150V AC for 1 minute
3. Contact Resistance 50mø max. Measured at 100mA
4. Vibration Electrical discontinuity, 1µS max. 1
0~55Hz and single amplitude 0.75mm in 3 directions for 2 hours, respectively.
5. Moisture Resistance
Contact resistance: 50mø max. Insulation resistance:500Mø min Exposed to temperature 40±2ç and humidity 90~95% for 96 hours
6. Temperature Cycle
Contact resistance: 50mø max. Insulation resistance:500Mø min
(-55ç: 30 minutes 5~35ç: 10 minutes 85ç: 30 minutes 5~35ç: 10 minutes) 5 cycles
7. Operating Life Contact resistance: 50mø max. 50 cycles
8.
Resistance to Soldering heat
No resion area fusion to degrade performance
Receptacle/Header
Insulator Polyamide Beige UL94-V0
Contact Phosphor copper Gold plating
–––––––
Fitting Brass Solder plating
–––––––
●Receptacle
SMT Type
Reflow : According to the
recommended temperature profile
Manual soldering : Soldering iron
temperature: 300çfor 3 seconds
Symbol Fitting Boss
None KK
A ∞ K
B K ∞
C∞∞
e Type Symbol r Stacking height y Connector Type
DP: Double-row pin header
●Header
Symbol Fitting Boss
None KK
B K ∞
D ∞ K
E∞∞
Indication Stacking Height
3.0 3.0mm
3.5 3.5mm
4.0 4.0mm
5.0 5.0mm
qw ret i oyu
Loading...