![](/html/a1/a187/a1871677be992c760086e912212a5075a2b51ce90873c6f6e575dde0449adfce/bg1.png)
User’s Manual
HDMI Extender over HDBaseT
With
Ultra-HD AV, IR, RS232 Control, and Ethernet
over a single Cat6 Cable
HDMI + RS-232 + IR + Ethernet Extender Kit
* Includes Sender and Receiver
HDMI + RS-232 + IR + Ethernet Sender
HDMI + RS-232 + IR + Ethernet Receiver
Order toll-free in the U.S. 800-959-6439
FREE technical support: 714-641-6607 or support@hallresearch.com
, 1163 Warner Ave. Tustin, CA 92780
www.hallresearch.com
![](/html/a1/a187/a1871677be992c760086e912212a5075a2b51ce90873c6f6e575dde0449adfce/bg2.png)
© Copyright 2018 Hall Research, Inc.
Table of Contents
1.0 Introduction ................................................................................. 3
Features ................................................................................................. 3
2.0 Package Contents ........................................................................ 4
3.0 Installation ................................................................................... 4
4.0 Connector and Indicator Functions ......................................... 5
HBX-S ................................................................................................... 5
HBX-R ................................................................................................... 6
5.0 Troubleshooting .......................................................................... 6
Contacting Hall Research ...................................................................... 6
6.0 Specifications ............................................................................... 7
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference even if it causes undesired operation.
This equipment has been desinged to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy, and if it is not installed and used in accordance with the instruction
manual, it may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
![](/html/a1/a187/a1871677be992c760086e912212a5075a2b51ce90873c6f6e575dde0449adfce/bg3.png)
© Copyright 2018 Hall Research, Inc.
1.0 Introduction
The HBX HDMI extender kit is comprised of a compact Sender (HBX-S) and
corresponding Receiver (HBX-R).
The kit is used to extend HDMI, RS-232, IR, and Ethernet (100BaseT) up to 100
meters (328 feet) using a single Cat6 cable.
The extender supports all PC and HDTV Resolutions to 4K @ 30 Hz 4:4:4 or 4K
@ 60 Hz 4:2:0.
The IR extension preserves the modulation (carrier) frequency and provides
compatibility to most standards. It supports modulation range from 30 KHz to
60 KHz.
The Sender and the Receiver each include a universal 5v power supply. IR
emitter and IR detector cables are included.
Typical Connection Diagram
Features
• Fully Compliant with HDBaseT standard
• Supports virtually all HDMI and DVI resolutions including 4K UHD
• Extends, Video, Audio, RS-232, IR, and Ethernet
• Supports extension to 100 m (330 ft)
• Fully isolates grounds between TX and RX sides
• Compact, Rugged, Reliable, and Economical
• Plug and play, no configuration needed
• Receiver can be powered via PoC from senders that provide PoC such
as HSM-44-BX Matrix Switch with HDBaseT outputs