QuickSpecs
Storage
Overview
Page 1
HPE MSA
HPE MSA 2052 Storage
Looking for seriously simple and affordable flash storage?
ProLiant Branding
not let the low cost fool you. The HPE MSA 2052 Storage system gives you the combination of simplicity, flexibility to grow now and
into the future, and advanced features you may not expect to find in an entry
included and scale as needed with any combination of solid state disks (SSD), high
SAS
HPE MSA Storage has been the industry
systems sold worldwide. Delivering performance in excess of 200,000 IOPS, the hybr
you up to 40% with an all
storage to help you get the most performance for the lowest cost.
HPE MSA 2052
2052 Storage
The hybrid flash HPE MSA 2052 Storage system with the new Gen10
is designed for affordable application acceleration that is ideal for small and remote office deployments. But do
-priced array. Start with 1.6 TB of flash capacity
-performance enterprise, or lower-cost midline
-based drives.
-leading entry storage SAN platform for the past eight years, with nearly 500,000 storage
id flash MSA 2052 Storage system can save
• HPE MSA 2052 performs in excess of 200,000 IOPS for affordable application acceleration
- Delivers 2x IOPS performance than the previous generation MSA 2042
- Save 40% on the hybrid flash MSA 2052 with all-inclusive software and 1.6 TB of SSD capacity included
• Advanced data services with no experience required
- Easy to install, easy to use, easy to maintain—no storage expertise necessary
- Automated tiering dynamically responds to workload changes, so you don’t have to
• Keep your business running with expanded data protection features
- New virtualized snapshot technology makes data protection and instant recovery a snap
- Remote replication with FC and iSCSI supports affordable disaster recovery
• Grow flexibly now and into the future
- Data-in-place upgrades protect drive investments and eliminate data migrations
- Start small and scale as needed with any combination of SSD, Enterprise or Midline SAS drives
-inclusive software suite and 1.6 TB of flash capacity included. It’s seriously simple and affordable flash
.
QuickSpecs
HPE MSA 2052 Storage
Standard Features
Page 2
HPE MSA 2052 Storage
Array
Access Type
Block
Form Factor
2U, SFF or LFF
Number of controllers per array
2
Minimum/Maximum host ports
1/8
FC host connectivity
8/16Gb
iSCSI host connectivity
1Gb or 10GbI
Cache, per array
Max Read cache per array
8TB
Data (read/write) cache + system memory per array
16GB
Pool Capacity (with Large Pool Support)
562 TB (512 TiB)
RAID Levels supported: Virtual mode
RAID 1, 5, 6, 10
Enclosures
Expansion Drive Enclosures
0-7 enclosures
LFF/SFF array/enclosure mixing
Supported
Maximum number of drives per array enclosure
24 SFF/12 LFF
Maximum number of drives per drive enclosure
24 SFF/12 LFF
Drive enclosure interface type
6Gb SAS
Drives
Maximum total HDDs per array
192 SFF / 96 LFF
Maximum total SSDs per array
192 SFF / 96 LFF
Max raw capacity per array enclosure
76.8 TB SFF / 120TB LFF
Max raw capacity per drive enclosure
76.8 TB SFF / 120TB LFF
Max raw capacity per array
614.4TB SFF / 960TB LFF
Bundled/Integrated SSDs
2x800GB Mixed Use SSDs
Drive Capacities
SFF SSDs (Mixed Use)
400GB, 800GB, 1.6TB, 3.2TB
LFF SSDs (Mixed Use)
400GB, 800GB
SFF HDDs
15K: 300GB, 600GB, 900GB
7.2K: 1.0TB, 2.0TB
LFF HDDs
7.2K: 2TB, 4TB, 6TB, 8TB, 10TB
SEDs
Encryption not supported
Software Features
Thin Technologies
Thin Provisioning, Space Reclamation, Thin Rebuild
Tiering
Performance Tier, Standard Tier, Archive Tier
Replication
Snapshots (512), Volume Copy, Remote Snaps
Quality of Service
Virtual Tier Affinity
Bundled/Integrated Licenses
Advanced Data Services LTU standard
Additional Features
Maximum number of volumes
512
Maximum number of snapshots
512
Maximum number of hosts
512
Maximum number of initiators
1024
Customer self-installable
Yes
Customer self-repairable
Yes
Customer self-upgradeable
Yes
10K: 300GB, 600GB, 900GB, 1.2TB, 1.8TB
QuickSpecs
HPE MSA 2052 Storage
Standard Features
Page 3
HPE MSA 2052 Storage
1.
AC Power supplies
4.
Management Ethernet port
2.
Host connection ports
FC or iSCSI,
5. Expansion port
3.
CLI port (mini-USB)
MSA 2052
Descriptions
Part Number
Storage Models
HPE MSA 2052 SAN Dual Controller LFF Storage1,2
Q1J02A
HPE MSA 2052 SAN Dual Controller SFF Storage1,2
Q1J03A
SFPs not included
ENERGY STAR
The HPE MSA 2052 Storage systems are ENERGY STAR certified. ENERGY STAR certified products are
energy efficient which result in cost savings via reduced energy consumption and regulatory rebates. Please
refer to the US EPA website for details on ENERGY STAR certification criteria and process
ENERGY STAR Certification is listed on the EPA website.
(NEBS)
The HPE MSA 2052 Storage system does not offer a NEBS certified carrier-grade bundled
solution. Refer to the MSA 2050 Quick
components.
NOTES:
1
Includes an LFF or SFF Array Chassis depending on model, two AC power supplies,
two MSA 2052 SAN controllers, two 800GB Mixed Use SSDs, one Advanced Data
Services LTU
2
Certification
Carrier-Grade
Storage System
. MSA 2052
Specs on how to configure and order carrier-grade
QuickSpecs
HPE MSA 2052 Storage
Standard Features
Page 4
All MSA 2052 models offer a common set of valuable features:
• MSA 2052 SAN storage system architecture maximizes performance
Configuration Table for mixing SFPs
Configuration
Controller
Host Port 1 SFP
1
Host Port 2 SFP
1
Host Port 3 SFP
2
Host Port 4 SFP
2
Dual SAN
Controller A
16Gb FC
16Gb FC
None
None
16Gb FC
16Gb FC
8Gb FC
8Gb FC
10GbE iSCSI
10GbE iSCSI
1GbE iSCSI
1GbE iSCSI
8Gb FC
8Gb FC
None
None
16Gb FC
16Gb FC
8Gb FC
8Gb FC
10GbE iSCSI
10GbE iSCSI
1GbE iSCSI
1GbE iSCSI
10GbE iSCSI
10GbE iSCSI
None
None
10GbE iSCSI
10GbE iSCSI
1GbE iSCSI
1GbE iSCSI
1GbE iSCSI
1GbE iSCSI
None
None
10GbE iSCSI
10GbE iSCSI
1GbE iSCSI
1GbE iSCSI
Controller B
Match Controller A
Match Controller A
Match Controller A
Match Controller A
NOTES: 1 SFP in Host Port 1 must match SFP in Host Port 2
SFP in Host Port 3 must match SFP in Host Port 4
All MSA 2052 models offer a common set of valuable features (cont):
• MSA 2052 comes standard with two 800GB flash drives which allow IT managers to accelerate application performance
Deploy the two embedded SSDs as Read Cache to improve random read performance. A maximum of 2 SSD’s are
automatic tiering, 512 snapshots, and remote snaps for remote replication.
- Includes SFF or LFF array chassis, depending on model
- Two MSA SAN controllers
Four host ports per controller
Each SAN controller supports 8 GB FC, 16 GB FC, 1GbE iSCSI or 10GbE iSCSI. Host connectivity
- 8 GB read/write cache per controller.
- Battery-free cache backup with super capacitors and compact flash
- Two 800GB Mixed Use SSDs
- One Advanced Data Services Software Suite LTU
• MSA 2052 SAN Controller allows customers to create their own Combo Controller by mixing FC and iSCSI SFPs. Below are
the valid configurations for mixing SFPs:
Controller
2
• The two 800GB SSDs can be optionally deployed either as read cache, or as an SSD virtual disk group for tiered storage.
-
supported per pool providing a maximum of 4TB of read cache per controller, max 8TB of read cache per array.
• All MSA 2052 models come standard with the Advanced Data Services (ADS) Software Suite LTU, which includes
- Deploy the two embedded SSDs as tiered storage. The MSA 2052 can manage up to three tiers of storage:
Performance tier, Standard tier and Archive tier.
- The Performance Auto Tiering License necessary to create a SSD virtual disk group for both read and write
capabilities comes standard with all MSA 2052 models. No additional software license purchase is necessary.
QuickSpecs
HPE MSA 2052 Storage
Standard Features
Page 5
• Storage Management Utility V3 (SMU). This new MSA management GUI brings a new modern look and feel to array
.
When capacity is added to a system, the user is
Application
The HPE MSA 2052 Storage is the ideal solution for customers running Oracle, Microsoft, SAP environments and
Learn more
To learn more about specific HPE Storage Solutions that are built with Oracle, Microsoft, SAP and Virtualization
management.
• Thin Provisioning allows storage allocation of physical storage resources only once they are consumed by an application.
Thin Provisioning also allows over-provisioning of physical
without predicting storage capacity upfront.
• All models feature a wide variety of drives: High-performance SSD drives, enterprise-class SAS, and SAS Midline drives.
• The MSA 2052 will support a maximum of 7 disk enclosures (either LFF and/or SFF). Add-on enclosures can either be
HPE MSA 2050 LFF Disk Enclosure or HPE MSA 2050 SFF Disk Enclosure.
• The MSA 2050 can grow incrementally to a maximum of 96 LFF, 192 SFF drives, or a combination of SFF and LFF
enclosures up to the maximum of 8 total enclosures.
• Virtual Storage Disks Groups can be spanned across multiple enclosures.
• Virtual Storage RAID levels supported; 1, 5, 6, 10.
• Maximum hard drive counts vary by RAID levels: 2 drive max for RAID level 1; max of 16 drives for RAID levels 5, 6, and 10
• Multiple Disk Groups can be aggregated into a single Storage Pool.
• The maximum LUN size is 140TB (128TiB)
• Storage Pools allow data on a given LUN to span across all drives in a pool.
also getting a performance benefit of the additional spindles.
• Snapshot enhancements for virtual storage, including performance improvements, hierarchical snapshots, and simplified
resource management. Administrators can monitor and optionally control snapshot space usage.
• Prioritize data by assigning appropriate affinity level (Performance, No Affinity or Archive)
• Customers can configure 512 TiB capacity per virtual pool by enabling large pool support.
• Non-disruptive on-line controller code upgrade. Requires Multi-pathing software.
• Upgradable by design. Owners of an MSA 2040, MSA 2042 and MSA 1040 array are able to do data-in-place upgrades to
the new MSA 2052 array. This unique ability protects the earlier investments in drives, and JBODs.
- Certain limitations are applicable. Please review the Upgrading to the HPE MSA 2050/2052 Technical
Whitepaper before upgrading your MSA 2040, MSA 2042 or MSA 1040 systems
storage pool resources allowing ease of growth for volumes
Solutions
those customers who are deploying virtual server technologies like VMware and Hyper-V. The MSA 2052
delivers enterprise functionality that enhances virtual environments, simplifies management, and reduces costs.
Easy to deploy, scale and maintain, HPE MSA 2052 Arrays ensure that crucial business data remains available.
Hewlett Packard Enterprise has developed best-in-class expertise in Oracle, Microsoft, SAP, and Virtualization
Hypervisor technology through extensive testing with the HPE MSA 2052, HPE servers, and management
software; high availability and disaster recovery solutions; and backup and recovery on the Oracle, Microsoft, and
SAP application platforms.
environments in mind, visit the solution sites supporting each of these applications.
HPE MSA Storage hyperlink to: http://www.hpe.com/storage/MSA
QuickSpecs
HPE MSA 2052 Storage
Standard Features
Page 6
Product Technology
SAN controller
MSA
Modular
2U rack height. 12 LFF or 24 SFF drive bays. All MSA 2052 SAN Storage Systems come standard with 2 SAN
controllers
NOTE: The MSA 2052 does not support single controller configurations.
Drives
The MSA 2052 SAN Storage systems support both the MSA 3.5-inch LFF drives, and the MSA 2.5-inch SFF
drives.
•
•
•
Optional Disk
Just as the user has a choice of chassis for the array enclosure (LFF or SFF drive bays), they also have a choice of
expansion disk enclosures accommodating either drive size. Both the
2050
Enclosures can be mixed without
MSA
accepts MSA dual
Enclosure has two I/O modul
•
•
•
HPE
SFF
2050
•
•
•
Scalability
The MSA 2052 array configurations are designed to allow an installation to begin with smaller capacity and be
able to grow gradually as needed. The flexibility of SSD, SAS or SAS MDL drives technology, form factors, sizes,
speeds, and costs per GB allows a
2052 SAN controller supports 8Gb FC, 16Gb FC, 1GbE iSCSI or 10GbE iSCSI host connectivity. .
Chassis
available
Enclosures
Solid State Drives (SSDs) deliver exceptional performance for applications requiring high random read
IOPs performance.
Serial Attached SCSI (SAS) enterprise-class drives are designed for high demand, 24x7 usage.
SAS Midline drives are usually reserved for archival of data as they are relatively inexpensive and are
available in very large capacities.
MSA 2050 LFF Disk Enclosure and MSA
SFF Disk Enclosure can be hot-added to an operating array. SFF and LFF Array enclosures and Disk
limitations.
2050 LFF Disk Enclosure. This 2U enclosure is designed to support twelve HPE Storage LFF drives and
-ported 12Gb SSD, SAS, and SAS MDL hard drives. The pre-configured MSA 2050 LFF Disk
es and supports the MSA 2052 dual controller arrays.
The MSA 2050 LFF Disk Enclosure can be attached to the MSA 2052 LFF or SFF storage models.
Each MSA 2050 LFF Disk Enclosure ships standard with two .5m mini-SAS to mini-SAS cables for connection
to the MSA 2052 array expansion port or existing disk enclosure cascade port.
LFF and/or SFF Disk Enclosures can be mixed up to the maximum of 7 total Disk Enclosures
MSA 2050 SFF Disk Enclosure This 2U enclosure is designed to support twenty four HPE Storage 2.5-inch
drives and accepts MSA dual ported 12Gb SSD, SAS, or SAS MDL hard drives. The pre-configured MSA
SFF Disk Enclosure has two I/O modules and supports the MSA 2052 dual controller arrays.
The MSA 2050 SFF Disk Enclosure can be attached to the MSA 2052 LFF or SFF storage models
Each MSA 2050 SFF Disk Enclosure ships standard with a two .5m mini-SAS to mini-SAS cables for
connection to the MSA 2052 array expansion port or existing disk enclosure cascade port.
LFF and/or SFF Disk Enclosures can be mixed up to the maximum of 7 total Disk Enclosures.
• Large Form Factor configurations can scale up to 120TB SAS MDL per array enclosure, expandable to
960TB SAS MDL with the addition of a maximum of seven MSA 2050 LFF Disk Enclosure.
• Small Form Factor configurations can scale up to 76.8 TB SAS SSDs per array enclosure, expandable to
614.4 TB SAS with the addition of a maximum of seven MSA 2050 SFF Disk Enclosure.
• Users may configure an MSA 2052 SFF array enclosure with MSA 2050 LFF Disk Enclosure. This is an
excellent option for a configuration that supports high-speed SFF SSDs or fast SFF enterprise-class SAS
drives in the array enclosure, combined with economical LFF drives staged for archival purposes, all in
the same array.
system to easily fit in almost any budget.
QuickSpecs
HPE MSA 2052 Storage
Standard Features
Page 7
Disk Group
A Disk Group is a collection of disks in a given redundancy mode (RAID 1, 5, 6, 10). Disk Group RAID level and
size can be created based on performance and/or capacity requirements
into a Storage Pool for use with the Virtual Storage features.
LUNs
The MSA 2052 arrays support 512 volumes and up to 512 snapshots in a system. All of these volumes can be
mapped to LUNs. Maximum LUN sizes up t
LUNs independent of the physical storage.
Storage Pools
Storage Pools are comprised of one or more Disk Groups. A volume’s data on a given LUN can now span all disk
drives in a pool.
to a system, users will benefit from the performance of all spindles in that
pool.
T
expansion. As volumes are expanded data automatically reflows to balance capacity utilization on all drives.
RAID 1, 5, 6,
The MSA 2052 features several important additional levels. RAID 6 offers the highest level of RAID protection. It
allocates two sets of parity data across drives and allows simultaneous write operations. It can withstand two
simultaneous drive failures without downtim
allows large Disk Groups to be created with high performance and mirroring for fault tolerance. RAID 5 combines
th
bottleneck. Striping also allows users to reconstruct data in case of a disk failure
Performance
The performance figures provided here are for reference as many variables exist between array configurations,
workloads,
Hewlett Packard Enterprise has
traditionally published a set of end
d into HPE Sizer tools which
are based on conservative real
documented in both Benchmark and End
will be provided for the MSA 2050 in a subsequent publication
notice.
MSA 2050 End
HPE MSA 2050
HPE MSA 2050
5,280
4,650
End
1)
type and number of drives, operating system used, and the number of hosts will affect overall performance.
This table is provided strictly as a test
2) Dual Controller configuration, (8) 400GB Mixed Use SSDs, RAID: 1, two drives per Disk Group; two Disk
Groups per Pool, 2 volumes per Pool, block size: 8k, average latency under 5ms, Windows Server 2012 host,
16Gb FC direct connect to array
. Multiple Disk Groups can be allocated
o 140TB (128 TiB). Thin Provisioning allows the user to create the
When capacity is added
he MSA 2052 supports large, flexible Volumes with sizes up to 128TiB and facilitates seamless capacity
10
e or data loss. RAID 10 is mirroring and striping without parity and
e block striping and parity. Because data and parity are striped across all of the disks, no single disk is a
hard drive types, disk group setup parameters and host system setup.
-to-end MSA performance specifications that are fe
-to-End Performance Results:
MSA 2050 Array Performance 1
-world configurations. For consistency, the MSA performance numbers have been
-to-End Performance tables. Complete End-to-End Performance results
. These numbers are subject to change without
Converged SAN Controller
Converged SAN Controller
with HDDs
with Mixed Use SSDs
Protocol (host connect) 16 Gb Fibre Channel 16 Gb Fibre Channel
MSA 2050 RAID 1 SSD Performance Results
2
Random Reads (IOPs) 220,600
Random Writes (IOPs) 102,800
MSA 2050 RAID 5 Performance Results
3,4
Segmented Sequential Reads (MB/s)
Segmented Sequential Writes (MB/s)
-to-End performance notes
Performance results were generated using internal HPE test tools. Number and type of applications, drive
-lab comparison
QuickSpecs
HPE MSA 2052 Storage
Standard Features
Page 8
3Dual Controller configuration, (72) 15k HDD, RAID: 5, nine drives per Disk Group, 4 Disk Groups per Pool, 32
volumes per Pool, block size: 256k, average latency under 30ms, Windows Server 2012 host, 16Gb FC direct
connect to array
4). Sequential perform
sequential workloads with a queue depth greater than 1, each sequential stream is targeted to operate on a
separate LBA range. Other types of sequential workloads that target s
results.
Tools
Internet Explorer, Mozilla Firefox, and Google Chrome.
Hot Plug
All MSA 2052 models support hot plug expansion and replacement of redundant controllers, enclosures, fans,
HPE Server
Compatibility
The MSA
• NOTE: depends on protocol
3
server
support
Party Server Vendor is an active member of TSANet.
OS Support
Refer to the Hewlett Packard Enterprise support statements for complete current OS version
support
ance numbers were generated using segmented sequential workloads. For segmented
pecific LBA ranges may achieve higher
Configuration
and
Management
Web Browser
support
Expansion and
Replacement
Support
rd
Party
Management access, out-of-band, Storage Management Utility (SMU), CLI.
Interface Types: USB 100/1000 Ethernet.
Protocols Supported SNMP, SMI-S, SSH, SMTP, FTP, SFTP, HTTP, HTTPS, Telnet
The MSA 2052 arrays come integrated with web browser and CLI based software for storage and RAID
management, setup, configuration, and troubleshooting. The MSA 2052 management supports Microsoft
power supplies, and I/O modules for simple, fast installation and maintenance. Hot add expansion of disk
enclosures is also supported.
2052 supports most HPE ProLiant, BladeSystems and Integrity servers including
• HPE ProLiant DL, ML Servers
• HPE c-Class Blade Servers
• Integrity servers, IA64
• Compatibility must be confirmed at: http://www.hpe.com/storage/spock
The MSA 2052 supports most multi-vendor industry standard Intel and AMD based (x86) servers. Hewlett
Packard Enterprise requires the Third-Party Server to be logged and listed on the Microsoft Windows Server
Catalog.
• Hewlett Packard Enterprise recommends that the Third-
Refer to the TSANet website for details: http://www.tsanet.com
• Non-HPE servers will generally be supported if the HPE storage stack is used. This includes supported HPE
branded HBAs and drivers, and supported FC switches.
: http://www.hpe.com/storage/spock
• Microsoft Windows Server 2016
• Microsoft Windows Server 2012
• VMware
• HP-UX
• Red Hat Linux
• SuSE SLES Linux
NOTE: depends on protocol
•
QuickSpecs
HPE MSA 2052 Storage
Software
Page 9
Advanced Data
The HPE MSA Advanced Data Service Suite is included as a standard feature on the MSA 2052 at
• Remote Snap Software
Performance Tiering
Disk tiers are comprised of aggregating 1 or more Disk Groups of similar physical disks. The MSA
require additional licenses until additional tiers are added.
Snapshot and
Remote Snaps
• HPE MSA Remote Snap Software is array based software that provides remote replication on
volume by copying the data represented by the snapshot via a transport medium such as
Services Software
Suite
and Archive Tiering
no extra charge. The standard MSA Advanced Data Services Software Suite includes the following
functionality:
• Performance Tiering and Archive Tiering Software
• 512 Snapshots and Volume Copy Software
2052 supports 3 distinct tiers:
1. A Performance tier with SSDs
2. A Standard SAS tier with Enterprise SAS HDDs
3. An Archive tier utilizing Midline SAS HDDs.
The MSA 2052 supports sub-LUN tiering and automated data movement between tiers. The MSA
2052 automated tiering engine moves data between available tiers based on the access
characteristics of that data. Frequently accessed “pages” will migrate to the highest available tier
delivering maximum I/O´s to the application.
To enable the tiering (data movement) between the Performance tier with SSDs and either of the
other tiers, the Advanced Data Services Suite is required. Systems containing only SSDs will not
Volume Copy
• 512 Snapshots and Volume Copy are standard features on the MSA 2052
• Snapshots create up to 512 point-in-time copies of data
• Volume Copies create up to 128 point-in-time copies of data
• Volume copies become standard volumes when they are complete
• Recovery is instant - revert data from any previous Snapshot or Volume Copy
• Backup 'snapped' data to disk, virtual tape, or physical tape without a backup window
the HPE MSA 2050 array products. MSA Remote Snap is a form of asynchronous replication
which consists of replication of block-level data from a volume on a local system to a volume on
a second independent system. This second system may be co-located with the first system or
may be located at a remote site.
• HPE Remote Snap functionality is based on existing Snapshot technology offered by HPE MSA
SAN array products. Snapshots are used to track the data to be replicated as well as to
determine the differences in data updated on the master volume, minimizing the amount of
data to be transferred.
• HPE Remote Snap replication technology provides the ability to accomplish key data
management and protection capabilities. First, because Remote Snap uses snapshots as the
underlying technology it creates multiple local recovery points which can be used for such
tasks as to complement daily backups; second, replication provides the ability to access data in
a remote site which could be used for dispersed operations; and third but definitely not least
important replication allows for business continuance in the event of a failure on the primary
site.
• In order to perform a replication, a snapshot of the volume to be replicated is taken, creating a
point-in-time image of the data. This point-in-time image is then replicated to the destination
QuickSpecs
HPE MSA 2052 Storage
Software
Page 10
TCP/IP (iSCSI) or Fibre Channel. The amount of data transferred is minimized though the use
HPE OneView for
HPE OneView for VMware vCenter is a component within the HPE OneView plug-in for vCenter. It
of snapshots whenever possible.
NOTE: One Advanced Data Services Suite License per array is required for replication. For
example, if you have two MSA arrays performing replication (from Primary system to
Remote System), you will need a total of 2 licenses.
Product Features
• Storage based asynchronous snapshot replication
• Support of both Ethernet and Fibre Channel interconnects provides flexible options to the
application environments.
• Snapshot based replication technology means only changed data will be replicated to alternate
site
• Many to 1 replication (up to 4 nodes) - primary use case is to replicate from "many" branch
offices to the home office for the purpose of backing up data from the branches
• Advanced scheduler provides several options to IT administrators for business continuance
• Flexible architecture allows remote replication between MSA 2052 and MSA 2040 or MSA
1040 arrays using the virtual storage architecture and licensed for Remote Snap. Protects
existing investments and enhances business continuity planning objectives.
• Snapshot based replication enables both local and remote recovery depending on the need.
Snapshot replication isolates problems to a specific point in time which can be selected by the
administrator. Additionally snapshot replication supports longer distance replication.
• Multiple relationships provide greater storage flexibility and utilization.
• 512 Snapshots and Volume Copy integration provides better efficiencies by combining the
management and array technologies to create local copies.
• Fast application recovery with minimal or no transaction loss
• Creation of disaster tolerant copies of your critical business data
• No-single-point-of-failure solution to increase the availability of your data
VMware vCenter
provides VMware administrators that are using VMware's vSphere management console (vCenter)
with the ability to see how virtual machines are mapped to datastores and individual MSA 2052
volumes. By providing these clear relationships between VM's, datastores and storage, the VMware
administrator's productivity increases, as does the ability to ensure quality of service. Roles for
administrators can be defined on an individual basis, providing the ability to apply specific
permissions for both view and control functions.
HPE OneView for VMware vCenter supports mixed array environments including MSA 2050/2052,
MSA 2040/2042, MSA 1040, P2000, EVA, P4000, and the XP array series including the P9500.
When deployed with the MSA 2052 array, HPE OneView provides the following:
• Active Management functionality for the MSA 2052 array:
- Create/Expand/Delete a Datastore
- Create a Virtual Machine from a template
• Monitors the health and status of the MSA 2052
• Displays LUN / volume connections from VMs and ESX servers to the arrays and provides
the location and attributes of the MSA 2052 within the SAN
• Identifies what storage features are available to allow administrators to match the features
available on the MSA 2052 to their requirements
• Provide a cluster-level view of the storage
QuickSpecs
HPE MSA 2052 Storage
Software
Page 11
HPE OneView for VMware vCenter is downloadable from Software
em_Center
storage array. With hardware offload, ESX/ESXi hosts perform certain operations faster and consume
UNMAP reclaims space that is no longer on a thinly provisioned VMFS volume
Depot: https://h20392.www2.hpe.com/portal/swdepot/displayProductInfo.do?productNumbe
r=HPVPR
For more information on HPE OneView for VMware vCenter
visit: http://h22168.www2.hpe.com/us/en/partners/vmware/
HPE StoreFront
Manager for Microsoft
vStorage API for Array
Integration (VAAI)
HPE StoreFront Manager for Microsoft enables management and monitoring of HPE MSA Storage
running in Microsoft Hyper-V environment with a single pane-of-glass view to events/alerts, capacity
and health dashboards and detailed virtual infrastructure information. It integrates seamlessly with
Microsoft System Center Operations Manager (SCOM) and provides Microsoft administrators the
following:
It supports heterogeneous HPE Storage environment including HPE MSA, HPE StoreVirtual, HPE
3PAR StoreServ, HPE StoreOnce, HPE StoreEasy, HPE XP, HPE EVA and HPE StoreEver Storage.
When deployed with the MSA 2052 array, HPE StoreFront Manager provides the following:
• Monitors the health, events and alerts for the MSA 2052 – virtual Pools, and volumes
• Provides detailed information on the VMs provisioned through MSA Storage
• Effortless installation and configuration using Powershell
HPE StoreFront Manager for Microsoft for MSA Storage is downloadable from Software Depot:
https://h20392.www2.hpe.com/portal/swdepot/displayProductInfo.do?productNumber=Syst
The vStorage API for Array Integration (VAAI) is one of the storage application programming
interface (API) sets in vSphere. VAAI is an API storage partners can leverage to enhance
performance of virtual machine (VM) management operations by delegating these operations to the
less server CPU and memory resources, and also storage port and storage fabric bandwidth. VAAI
includes high performance and scalable VM data path primitives.
Storage Hardware Primitives for VAAI
• Full Copy or Hardware Assisted Move
• Block Zeroing or Hardware Assisted Zeroing
• Hardware Assisted Locking or Atomic Test and Set (ATS)
QuickSpecs
HPE MSA 2052 Storage
Warranty, Service
and Support Information
Page 12
Warranty
Three-year limited warranty, parts exchange Next Business day delivery.
year warranty.
Solid State Drives
3/0/0 warranty; Customer Self Repair (CSR) subject to maximum usage and or maximum supported lifetime
device before reaching the device's write endurance limit.
Service and
Protect your business beyond warranty with HPE Support Services
together all the pieces of the puzzle for you, with an eye on the future, and make the complex
simple.
Connect your
Unlock all of the benefits of your technology investment by connecting your products to Hewlett Packard
Service customers will also benefit from proactive activities to help prevent issues and increase optimization.
Learn more about getting connected at http://www.hpe.com/services/getconnected
3 Years 9x5 telephone support, with Rights to New Versions bundled with the MSA 2052.
(SSD)
Warranty
Support
Enclosures, Hard drives, and Options for the MSA 2052 carry their own warranty. Refer to
Hewlett Packard
Enterprise Limited Warranty Statement for more information.
The MSA 2052 has been designed with customer self-repairable parts to minimize repair time and provide
greater flexibility in performing defective parts replacement. Please refer to Hewlett Packard Enterprise
limited warranty Statement and parts replacement instructions for further details.
NOTE: The warranty of the hard drive options purchased with the MSA 2052 models is different for SAS
hard drives versus SAS MDL. SAS hard drive options have a three year warranty and SAS MDL have a one
limitations, whichever occurs first. Maximum Supported Lifetime is the period in years set to equal the
warranty for the device. Maximum usage limit is the maximum amount of data that can be written to the
HPE Pointnext provides a comprehensive portfolio including Advisory and Transformational, Professional,
and Operational Services to help accelerate your digital transformation. From the onset of your
transformation journey, Advisory and Transformational Services focus on designing the transformation and
creating a solution roadmap. Professional Services specializes in creative configurations with flawless and
on-time implementation, and on-budget execution. Finally, operational services provides innovative new
approaches like Flexible Capacity and Datacenter Care, to keep your business at peak performance. HPE is
ready to bring
devices
Enterprise. Achieve up to 77%1 reduction in down time, near 100%2 diagnostic accuracy and a single
consolidated view of your environment. By connecting, you will receive 24x7monitoring, pre-failure alerts,
automatic call logging, and automatic parts dispatch. HPE Proactive Care Service and HPE Datacenter Care
All of these benefits are already available to you with your server storage and networking products, securely
connected to HPE support
1
IDC
2
HP CSC reports 2014-2015
QuickSpecs
HPE MSA 2052 Storage
Warranty, Service and Support Information
Page 13
Optimized Care
HPE Proactive Care with 6 hour call-to-repair commitment, three year Support Service
th recommendations and advice. This Service combines three years’ proactive reporting and advice
e available as a standard service offering for your most
Standard Care
HPE Proactive Care with 24x7 coverage, three year Support Service
Basic Care
HPE Foundation Care 24x7, three-year Support Service
resolving issues. This service includes need based Hardware onsite response within four hours. Simplify your
Foundation Care
HPE Foundation Care 24x7, three-year Support Service
collaborative software support is included in this service that provides troubleshooting assistance on industry
leading software running on your HPE server. Simplify your support experience and make HPE your first call
Parts and
HPE will provide HPE-supported replacement parts and materials necessary to maintain the covered
Related Services
HPE Hardware Installation
modules (Ethernet and Fibre Channel), Ethernet network interconnects, and InfiniBand, as well as the
HPE Proactive Care gives customers an enhanced call experience. When your products are connected to
HPE, Proactive Care helps prevent problems and maintains IT stability by utilizing personalized proactive
reports wi
with our highest level of hardware support; HPE’s 24x7, six hour hardware call-to-repair. HPE is the only
leading manufacturer who makes this level of coverag
valuable servers and storage, including the HPE MSA 2050/2052 Storage.
https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf
HPE Proactive Care gives customers an enhanced call experience. When your products are connected to
HPE, Proactive Care helps prevent problems and maintains IT stability by utilizing personalized proactive
reports with recommendations and advice This Service combines three years proactive reporting and advice
with our 24x7 coverage, four hour hardware response time when there is a problem.
https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf
HPE Foundation Care 24x7 gives you access to HPE 24 hours a day, seven days a week for assistance on
support experience and make HPE your first call to help resolve hardware or software problems.
https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en
HPE Foundation Care 24x7 gives you access to HPE 24 hours a day, seven days a week for assistance on
resolving issues. This service includes need based Hardware onsite response within four hours. In addition,
to help resolve hardware or software
problems.
https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-
8876ENW&cc=us&lc=en
Materials
hardware product in operating condition, including parts and materials for available and recommended
engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical product
data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HPE due to malfunction
Provides for the basic hardware installation of HPE branded servers, HPE storage including the MSA
2050/2052. devices and networking options to assist you in bringing your new hardware into operation in a
timely and professional manner.
https://www.hpe.com/h20195/V2/GetPDF.aspx/5981-9356EN.pdf
HPE Installation and Startup Service
Provides for the installation and startup of HPE technology including BladeSystems, C-Class enclosure, HPE
ProLiant c-Class and Integrity server blades, storage blades, SAN switch blades, HPE Virtual Connect
QuickSpecs
HPE MSA 2052 Storage
Warranty, Service and Support Information
Page 14
installation of one supported operating system type (Windows® or Linux). Included the HPE MSA
scalability, and economics of the public cloud in the privacy of your
the advantages that IT provides the business (i.e., control, security). Deliver the right user experience, choose
Keep your IT staff trained making sure they have the right skills to deliver on your business outcomes. Book
The HPE Support Center is a personalized online support portal with access to information, tools and experts
For more information: http://www.hpe.com/services
2050/2052.
HPE Datacenter Care service
Helps improve IT stability and security, increase the value of IT, and enable agility and innovation. It is a
structured framework of repeatable, tested, and globally available services “building blocks.” You can deploy,
operate, and evolve your datacenter wherever you are on your IT journey. With HPE Datacenter Care, you
benefit from a personalized relationship with HPE via a single point of accountability for HPE and others’
products.
For more information, visit
HPE Flexibly Capacity,
With Flexible Capacity, you get the speed,
data center. Gain the advantages of the public cloud—consumption-based payment, rapid scalability without
worrying about capacity constraints. Reduce the “heavy lifting” needed to operate a data center. And retain
the right technology for the business, manage privacy and compliance, and manage the cost of IT. And, you
have the option to use the public cloud when needed.
HPE Factory Express for Servers and Storage
HPE Factory Express offers configuration, customization, integration and deployment services for HPE
servers and storage products. Customers can choose how their factory solutions are built, tested, integrated,
shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex configuration
and design services as well as individual factory services, such as image loading, asset tagging, and custom
packaging. HPE products supported through Factory Express include a wide array of servers and storage:
HPE Integrity, HPE ProLiant, HPE Apollo, HPE ProLiant Server Blades, HPE BladeSystem, HPE 9000 servers
as well as the HPE MSA Storage, HPE 3PAR Storage, HPE XP, rackable tape libraries and configurable
network switches.
HPE Education Services
on a class today and learn how to get the most from your technology investment. www.hpe.com/ww/learn
HPE Support Center
to support HPE business products. Submit support cases online, chat with HPE experts, access support
resources or collaborate with peers.
Learn more www.hpe.com/support/hpesc
HPE Insight Remote Support and HPE Support Center are available at no additional cost with a HPE
warranty, HPE Support Service or HPE contractual support agreement.
QuickSpecs
HPE MSA 2052 Storage
Configuration Information
Page 15
Step 1 - MSA 2052 - Base Configurations
Pre-Configured
MSA 2052 Base System (AC Powered)
HPE MSA 2052 SAN Dual Controller LFF Storage
1,2,3
Q1J00A
HPE MSA 2052 SAN Dual Controller SFF Storage
1,2,3
Q1J01A
.
Step 2 – Choose Your SFP+ Module
SFP+
HPE MSA 8Gb Short Wave Fibre Channel SFP+ 4-pack Transceiver
(Includes four x 8Gb SW FC SFPs)
C8R23B
HPE MSA 16Gb Short Wave Fibre Channel SFP+ 4-pack Transceiver
C8R24B
HPE MSA 10Gb Short Range iSCSI SFP+ 4-pack Transceiver
(Includes four x 10Gb SW iSCSI SFPs)
C8R25B
HPE MSA 1Gb RJ-45 iSCSI SFP+ 4-pack Transceiver
(Includes four x 1Gb RJ-45 iSCSI SFPs)
C8S75B
NOTE:
Step 3 – Select Your Drives.
MSA HDDs and SSDs drives are for use with MSA Storage Systems only.
Customers can mix SSD, SAS, and SAS MDL drives in the same array enclosure and disk enclosure
12G SFF SAS SSDs (Mixed Use)
HPE MSA 400GB 12G SAS Mixed Use SFF (2.5in) 3yr Warranty Solid State Drive
N9X95A
HPE MSA 800GB 12G SAS Mixed Use SFF (2.5in) 3yr Warranty Solid State Drive
N9X96A
HPE MSA 1.6TB 12G SAS Mixed Use SFF (2.5in) 3yr Warranty Solid State Drive
N9X91A
HPE MSA 3.2TB 12G SAS Mixed Use SFF (2.5in) 3yr Warranty Solid State Drive
N9X92A
SFF HDDs
12G SFF 15K SAS HDDs
HPE MSA 300GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty Hard Drive
J9F40A
HPE MSA 600GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty Hard Drive
J9F42A
HPE MSA 900GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty Hard Drive
Q1H47A
12G SFF 10K SAS HDDs
HPE MSA 300GB 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr Warranty
Hard Drive
J9F44A
Systems
Modules
NOTE:
1) Includes an LFF or SFF Array Chassis depending on model, two AC power
supplies, two MSA 2052 SAN controllers, two 800GB Mixed Use SSDs, one
Advanced Data Services LTU
2) SFPs not included
3) Single controller options are not supported
(Includes four x 16Gb SW FC SFPs)
MSA SFPs are for use only with MSA 2052 SAN Controllers
MSA 2052 SAN Controllers do not ship with any SFPs
Customer must select at least one of the above SFP options
Each MSA 2052 SAN controller can be configured with 2 or 4 SFPs
For MSA 2052 10Gb iSCSI configuration user can use DAC cables instead of
SFPs
SFF SSDs
QuickSpecs
HPE MSA 2052 Storage
Configuration Information
Page 16
HPE MSA 600GB 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr Warranty
Hard Drive
J9F46A
HPE MSA 900GB 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr Warranty
Hard Drive
J9F47A
HPE MSA 1.2TB 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr Warranty
Hard Drive
J9F48A
HPE MSA 1.8TB 12G SAS 10K SFF (2.5in) 512e Enterprise 3yr Warranty Hard
Drive
J9F49A
12G SFF 7.2K SAS MDL HDDs
HPE MSA 1TB 12G SAS 7.2K SFF (2.5in) 512e Midline 1yr Warranty Hard Drive
J9F50A
HPE MSA 2TB 12G SAS 7.2K SFF (2.5in) 512e Midline 1yr Warranty Hard Drive
J9F51A
NOTE:
•
class SSD or SAS drive
LFF SSDs
12G LFF SAS SSDs (Mixed Use)
HPE MSA 400GB 12G SAS Mixed Use LFF (3.5in) Converter Carrier 3yr Wty Solid
P9M79A
HPE MSA 800GB 12G SAS Mixed Use LFF (3.5in) Converter Carrier 3yr Wty Solid
State Drive
P9M80A
LFF HDDs
12G LFF 7.2K SAS Midline Drives
HPE MSA 2TB 12G SAS 7.2K LFF (3.5in) 512n Midline 1 yr Warranty Hard Drive
N9X93A
HPE MSA 4TB 12G SAS 7.2K LFF (3.5in) 512e Midline 1yr Warranty Hard Drive
K2Q82A
HPE MSA 6TB 12G SAS 7.2K LFF (3.5in) 512e Midline 1yr Warranty Hard Drive
J9F43A
HPE MSA 8TB 12G SAS 7.2K LFF (3.5in) 512e Midline 1yr Warranty Hard Drive
M0S90A
HPE MSA 10TB 12G SAS 7.2K LFF (3.5in) Midline 512e 1 yr Wty Hard Drive
P9M82A
Step 4 – Options
Drive
HPE MSA 2050 LFF Disk Enclosure
Q1J06A
HPE MSA 2050 SFF Disk Enclosure
Q1J07A
NOTE:
SFF
2052
HP External Mini SAS 1m Cable
407337-B21
HP External Mini SAS 2m Cable
407339-B21
NOTE:
HP ProLiant 12 ft Power Cord
227099-001
Power Cord, (Australia/China/New Zealand)
227098-001
Power Cord, (Central Europe)
157215-001
Power Cord, (United Kingdom/Hong Kong)
157216-001
Power Cord, (Switzerland)
157219-001
Power Cord, (Italy)
157217-001
Power Cord, (Denmark)
157218-001
Power Cord, (Japan)
139867-001
• SAS MDL drives are designed for archival or reference data
• SAS MDL drives should not be used in a heavy or intense I/O environment
Intense I/O environments require the use of enterprise-
State Drive
Enclosures
SAS Cables
AC Power Cords
• Each drive enclosure includes two 0.5m MiniSAS to MiniSAS cables
• Add up to 7 expansion drive enclosures
•
MSA 2052 LFF Disk Enclosure can be connected to either the MSA 2052
or LFF dual controller systems.
• HPE MSA 2052 SFF Disk Enclosure can be connected to either the MSA
SFF or LFF dual controller systems
• Connecting MSA 2052 Controller to a JBOD if a longer cable is desired
QuickSpecs
HPE MSA 2052 Storage
Configuration Information
Page 17
Power Cord, (South East Asia/India)
157220-001
NOTE:
Step 5a - Choose Supported Options For Fibre Channel Infrastructure
PremierFlexOM4
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QK734A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
QK735A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
QK736A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK737A
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
AJ833A
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
AJ834A
HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
AJ835A
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
AJ836A
M3 FC LC-LC cables
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
AJ837A
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
AJ838A
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
AJ839A
Step 5b - Choose Supported Options For 10GbE Infrastructure
Copper Cable
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 0.5m Direct Attach Copper Cable
487649-B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 1m Direct Attach Copper Cable
487652-B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 3m Direct Attach Copper Cable
487655-B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 5m Direct Attach Copper Cable
537963-B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 7m Direct Attach Copper Cable
487658-B21
DAC Cable
HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
J9281B
HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
J9283B
HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable
J9285B
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
Step 6 – Software
The MSA Advanced Data Services Software Suite comes standard on the MSA
2052. No optional software titles are available on the MSA 2052.
type cables
• Two PDU cables: one 142263-008 (Black) and one 1422633-013 (Grey),
ship standard with all AC-powered enclosures
QuickSpecs
HPE MSA 2052 Storage
Technical Specifications
Page 18
MSA 2052
POWER REQUIREMENTS
Input Power
• 110VAC 3.32A, 344-390 W; 220VAC 1.61A,374-432W
Max Input Power
100-240 VAC, 50/60 Hz., 4.5-1.9A; 48-60 VDC 10.4A/8.3A
Heat Dissipation
1622 BTU/hr
TEMPERATURE AND HUMIDITY RANGES
Operating Temperature
41°F to 104°F (5°C to 40°C)
Shipping Temperature
-40°F to 158°F (-40°C to 70°C)
Operating Humidity
10% to 90% RH @ 104°F (40°C) non-condensing
Non-Operating Humidity
Up to 93% RH @ 104°F (40°C)
DECLARED ACOUSTIC NOISE LEVELS
Sound Power
A weighted sound power LWAd=6,75 B
Sound Pressure
A weighted sound pressure LpAm - 55dB
SHOCK AND VIBRATION
Shock, Operational
3G's for 11 milliseconds
Shock, Non-Operational
15G 11ms half sine
Vibration, Operational
5-500Hz, 0.14 Grms shaped
Vibration, NonOperational
3-365-3Hz, 1.22 Grms,z-axis,0.85 Grms, X&Y axis shaped spectrum
PHYSICAL
Height
3.5 in/ 8.9 cm
Depth (excluding cables)
controller handle)
SFF 24-bay array: 19.5 in / 49.5 cm
LFF 12
Width (body only)
17.6 in / 44.7 cm (w/ ears 19 in / 48.26 cm)
Weight
controllers. No drives)
LFF chassis: 40.6 lbs.
SFF chassis:
MSA 2052
Regulatory Info
Safety
UL 60950-1 (USA)
CAN/CSA-C22.2 No.60950-1-03 (Canada)
EN 60950-1 (European Union)
GS mark (Germany)
IEC 60950-1 (International)
CCC Mark (power supply only, China PRC)
Electromagnetic
VCCI:2008-04 Class A (Japan)
FCC 15:109(g) Class A (USA)
ICES-003:2004 Class A (Canada)
EN55022 : (European Union Class A); CISPR 22 (International Class A)
EN61000-3-2 : (Harmonics) (European Union)
EN61000-3-3 : (Flicker) (European Union)
Requirements
(typical-running I/O)
SFF/LFF arrays
(back of ear to back of
(Includes chassis and 2
Compatibility
-bay array: 22.5in. / 57.2 cm
38.7 lbs
QuickSpecs
HPE MSA 2052 Storage
Technical Specifications
Page 19
EN 55024 (European Union, Immunity, Class A);CISPR 24 (International
Immunity, Class A)
AS/NZS CISPR 22, Class A (Australia, New Zealand)
CNS 13438 Taiwan, Class A (Taiwan)
KN22 Class A (Emissions Class A); KN24 (Immunity) (S Korea)
RoHS and WEEE
RoHS-6/6 Compliance, China RoHS, WEEE
Country Approvals
United States ,Australia/New Zealand, Canada, China (PRC), European
Union, Germany (GS Mark), Japan, South Korea, Taiwan
QuickSpecs
HPE MSA 2052 Storage
Summary of Changes
Page 20
Date
Version History
Action
Description of Change
05-Jun-2017
Version 1
Created
Document Created
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for
services are set forth in the express warranty statements accompanying such pr
Nothing herein should be construed as constituting an additional warranty.
shall not be liable for technical or editorial errors or omissions contained herein.
Microsoft and Windows NT are US registered trad
trademark of Intel Corporation. Unix is a registered trademark of The Open Group.
a00008277enw
Hewlett Packard Enterprise products and
emarks of Microsoft Corporation. Intel is a US registered
- 15936 - Worldwide - V1 - 05-June-2017
oducts and services.
Hewlett Packard Enterprise
Loading...