HPE 798155-B21 Getting Started Guide

QuickSpecs
HPE ProLiant XL170r Gen9 Server

Overview

Page 1
HPE ProLiant XL170r Gen9 Server
The ProLiant XL170r Gen9 Server is a 1U half
18
The Apollo 2000r series chassis accommodates 4 independently serviceable ProLiant XL170r Ge in a 42U rack with 1 to 4 servers per chassis. Rack scale power efficiency is easy with Advanced Power Management for rack, chassis, server and component level management
Front View
Item
Description
Item
Description
1
Bayonet board slot
10
Dedicated iLO port connector
2
DIMMs for processor 2
11
NMI header
3
DIMMs for processor 1
12
PCIe x16 riser board connector*
4
PCIe x40 riser board connector*
13
microSD slot
5
System maintenance switch
14
System battery
6
Mini-SAS connector 1 (SATA x4)
15
M.2 SSD riser connector
7
Internal USB 3.0 connector
16
TPM connector
8
Mini-SAS connector 2 (SATA x4)
17
Processor 1
9
PCIe x24 riser board connector*
18
Processor 2
Rear View
-width, 2-processor server with configuration options for:
Performance and efficient CPUs -- Intel Xeon E5-2600v3 and E5-2600v4 series processor options with choices from 4-
Cores, 1.6GHz – 3.5GHz CPU speed, and power ratings between 85-145 Watts
16 memory DIMM slots with up to 512GB DDR4 memory at up to 2400 MHz
2 I/O slots for a choice of networking and clustering options including : 1Gb, 10Gb, 40Gb Ethernet, 56 Gb/s FDR
InfiniBand, FibreChannel and options for either 1 PCIe slot plus a FlexibleLOM or 2 PCIe slots
n9 servers with up to 80 servers
QuickSpecs
HPE ProLiant XL170r Gen9 Server
Overview
Page 2
Item
Description
1
Node serial number and iLO label pull tab
2
SUV connector
3
USB 3.0 connector
4
Dedicated iLO port (optional)
5
NIC connector 1
6
NIC connector 2
Single-slot left PCI riser cage assembly
Item
Form factor
Slot number
Slot description
1
Low-profile PCIe card
1
PCIe3 x16 (16, 8, 4, 1) for Processor 1
QuickSpecs
HPE ProLiant XL170r Gen9 Server
Overview
Page 3
Single-slot 1U node right PCI riser cage assembly
Item
Form factor
Slot number
Slot description
1
Low-profile PCIe NIC card
2
PCIe3 x16 (16, 8, 4, 1) for Processor 2
FlexibleLOM 1U node riser cage assembly
Item
Form factor
Slot number
Slot description
1
FlexibleLOM
FlexibleLOM slot
PCIe3 x8 for Processor 1
QuickSpecs
HPE ProLiant XL170r Gen9 Server

Standard Features

Page 4
NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information Factory
Processor
E5-2600 v3 series Processors (Please follow product offering to fill out processor SKU)
Model
CPU
Cores
L3 Cache
Power
QPI
DDR4 Hz
E5-2699v3
2.3GHz
18
45MB
145W
9.6GT/s
2133
E5-2698v3
2.3GHz
16
40MB
135W
9.6GT/s
2133
E5-2697v3
2.6GHz
14
35MB
145W
9.6GT/s
2133
E5-2695v3
2.3GHz
14
35MB
120W
9.6GT/s
2133
E5-2690v3
2.6GHz
12
30MB
135W
9.6GT/s
2133
E5-2683v3
2.0GHz
14
35MB
120W
9.6GT/s
2133
E5-2680v3
2.5GHz
12
30MB
120W
9.6GT/s
2133
E5-2670v3
2.3GHz
12
30MB
120W
9.6GT/s
2133
E5-2667v3
3.2GHz
8
20MB
135W
9.6GT/s
2133
E5-2660v3
2.6GHz
10
25MB
105W
9.6GT/s
2133
E5-2650v3
2.3GHz
10
25MB
105W
9.6GT/s
2133
E5-2650Lv3
1.8GHz
12
25MB
65W
9.6GT/s
2133
E5-2643v3
3.4GHz
6
20MB
135W
9.6GT/s
2133
E5-2640v3
2.6GHz
8
20MB
90W
8.0GT/s
1866
E5-2637v3
3.5GHz
4
15MB
135W
9.6GT/s
2133
E5-2630v3
2.4Ghz
8
20MB
85W
8.0GT/s
1866
E5-2609v3
1.9GHz
6
15MB
85W
8.0GT/s
1600
E5-2620v3
2.4GHz
6
15MB
85W
8.0GT/s
1866
E5-2603v3
1.6GHz
6
15MB
85W
6.4GT/s
1600
Integrated Models" section.
One of the following depending on Model
frequency
QuickSpecs
HPE ProLiant XL170r Gen9 Server
Standard Features
Page 5
Processor
E5-2600 v4 series Processors (Please follow product offering to fill out processor SKU)
Model
CPU
Cores
L3 Cache
Power
QPI
DDR4 Hz
E5-2603v4
1.7GHz
6
15MB
85W
6.4GT/s
1866
E5-2609v4
1.7GHz
8
20MB
85W
6.4GT/s
1866
E5-2620v4
2.1GHz
8
20MB
85W
8.0GT/s
2133
E5-2623v4
2.6GHz
4
10MB
85W
8.0GT/s
2133
E5-2630Lv4
1.8GHz
10
25MB
55W
8.0GT/s
2133
E5-2630V4
2.2GHz
10
20MB
85W
8.0GT/s
2133
E5-2640V4
2.4GHz
10
25MB
90W
8.0GT/s
2133
E5-2643V4
3.4GHz
6
20MB
135W
9.6GT/s
2400
E5-2650LV4
1.7GHz
14
35MB
65W
9.6GT/s
2400
E5-2650V4
2.2GHz
12
30MB
105W
9.6GT/s
2400
E5-2660V4
2.0GHz
14
35MB
105W
9.6GT/s
2400
E5-2667V4
3.2GHz
8
25MB
135W
9.6GT/s
2400
E5-2680V4
2.4GHz
14
35MB
120W
9.6GT/s
2400
E5-2683V4
2.1GHz
16
40MB
120W
9.6GT/s
2400
E5-2690V4
2.6GHz
14
35MB
135W
9.6GT/s
2400
E5-2695V4
2.1GHz
18
45MB
120W
9.6GT/s
2400
E5-2697V4
2.3GHz
18
45MB
145W
9.6GT/s
2400
E5-2698V4
2.2GHz
20
50MB
135W
9.6GT/s
2400
E5-2697AV4
2.6GHz
16
40MB
145W
9.6GT/s
2400
E5-2699V4
2.2GHz
22
55MB
145W
9.6GT/s
2400
Processor
E5-1600 v3 series Processors (Please follow product offering to fill out processor SKU)
Model
CPU frequency
Cores
L3 Cache
Power
DDR4 Hz
E5-1680v3
3.2GHz
8
20MB
140W
2133
E5-1650v3
3.5GHz
6
15MB
140W
2133
E5-1630v3
3.7GHz
4
10MB
140W
2133
NOTE:
Chipset
Intel® C610 Series Chipset
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/.
On System
Processor
HPE iLO (Firmware: HPE iLO 4)
NOTE: For more information, visit: http://www.hp.com/go/ilo
Memory Protection
Advanced ECC (multi-bit error protection)
One of the following depending on Model
frequency
One of the following depending on Model
these processors are supported with the following risers kits.
HPE XL170r FLOM x8 R Riser Kit-798180-B21
HPE XL170r/190r LP PCIex16 L Riser Kit- 798178-B21
HPE XL170r Gen9 LP PCIex16 R Riser Kit-819939-B21
Management
QuickSpecs
HPE ProLiant XL170r Gen9 Server
Standard Features
Page 6
Memory Online Spare Mode (Rank Spare Mode)
Memory
Type
HPE SmartMemory
DDR4 Load Reduced (LRDIMM), or Registered (RDIMM)
DIMM Slots Available
16 DIMM Slots available
Maximum (LRDIMM) (per server tray)
2TB (16 x 128GB)
NOTE: HPE memory from previous generation servers are not fully compatible with the HPE ProLiant
Configuration Tool at: http://h22195.www2.hpe.com/MemoryTool/Home/Legal
Network Controller
Ethernet Options
Riser Options to support FlexibleLOM cards
Xl170r Gen9 Server. NOTE: To realize the performance memory capabilities listed in this document, HPE SmartMemory is required. For additional information, please see the HPE SmartMemory QuickSpecs at:
https://www.hpe.com/h20195/v2/gethtml.aspx?docname=c04111535
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server. NOTE: Depending on the memory configuration and processor model, the memory speed may run at
2133MHz, 1866MHz, or 1600MHz. Please see Memory Population Table or the Online Memory
HPE Ethernet 1Gb 2P 332T Adapter HPE Ethernet 1Gb 4-port 331T Adapter HPE Ethernet 1Gb 2P 361T Adapter HPE Ethernet 10Gb 2P 530SFP+ Adapter HPE Ethernet 10Gb 2P 530T Adapter HPE Ethernet 10Gb 2P 560SFP+ Adapter HPE Ethernet 10Gb 2P 561T Adapter HPE Ethernet 10G 2-port 546SFP+ Adapter HPE XL170r/190r Dedicated NIC IM Board Ki HPE 1Gb Ethernet 4P 331FLR Adapter HPE Ethernet 1Gb 4-port 366FLR Adapter HPE Eth 4x25Gb 1p 620QSFP28 Adptr HPE Ethernet 10Gb 2P 560FLR-SFP+ Adapter HPE FlexFabric 10Gb 2P 534FLR-SFP+ Adapter HPE FlexFabric 10Gb 2P 533FLR-T Adapter HPE FlexFabric 10Gb 2P 556FLR-SFP+ Adapter HPE FlexFabric 10Gb 4-port 536FLR-T Adapter HPE FlexFabric 10Gb 2-port 536FLR-T Adapter HPE Ethernet 10Gb 2P 546FLR-SFP+ Adapter HPE Ethernet 10Gb 2-port 562SFP+ Adptr HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adpt HPE StoreFabric CN1200E-T 10Gb CAN HPE StoreFabric CN1100R-T 10Gb CAN InfiniBand Options HPE IB FDR/EN 40Gb 2P 544+FLR-QSFP Adapter HPE IB QDR/EN 10Gb 2P 544+FLR-QSFP Adapter HPE IB FDR/EN 40Gb 2P 544+QSFP Adapter HPE IB FDR 2P 545FLR-QSFP Adapter HPE IB FDR 2P 545QSFP Adapter QLogic 4X QDR IB PCI-e G2 HCA HPE 100Gb 1p OP101 QSFP28 x16 OPA Adptr HPE IB EDR/EN 100Gb 1P 840QSFP28 Adapter HPE IB EDR/EN 100Gb 2P 840QSFP28 Adapter
NOTE: the ambient operating temperature cannot exceed 20 ° C/68 ° F
QuickSpecs
HPE ProLiant XL170r Gen9 Server
Standard Features
Page 7
HPE XL170r FLOM x8 R Riser Kit
NOTE: The HPE XL170r FLOM x8 R Riser Kit (798180-B21) is required to order the FlexibleLOM options.
Expansion Slots
Expansion
Slot #
Technology
Bus
Width*
Source
Connector Width
Form Factor
1
PCIe 3.0
x16
CPU1
x16
Low profile
Expansion
Slot #
Technology
Bus
Width*
Source
Connector Width
Form Factor
FlexibleLOM
PCIe 3.0
X8
CPU1
x16
FlexibleLOM
Expansion
Slot #
Technology
Bus
Width*
Source
Connector Width
Form Factor
2
PCIe 3.0
X16
CPU2
x16
Low profile
NOTE: Indicates the number of physical electrical lanes running to the connector.
HPE Server ROM
HPE ROM (Read Only Memory) is now digitally signed using the Hewlett Packard Enterprise Corporate
ents before control is passed
http://www.hpe.com/support/rbsu.
HPE Server Unified
The HPE ProLiant System BIOS is an EDK2 UEFI solution, and adheres to the latest revisions of UEFI Class 2
systems, and software collaborate to greatly enhance platform security.
(EE)
NOTE: Expansion slot 1 requires ordering HPE XL170r Gen9 LP PCIex16 L Riser Kit (798178-B21) NOTE: FlexibleLOM require ordering HPE XL170r FLOM x8 R Riser Kit (798180-B21) NOTE: Expansion slot 2 HPE XL170r LP PCIe x16 R Riser Kit (798182-B21)
Signing Service. This signature is verified before the flash process starts, reducing accidental programming and preventing malicious efforts to corrupt system ROM.
HPE ROM provides for essential initialization and validation of hardware compon to the customer-installed operating system. The ROM also provides the capability of booting from various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.
HPE ROM performs very early configuration of the video controller, to allow monitoring of initialization progress via an attached monitor. If configuration or hardware errors are discovered during this early phase of hardware initialization, suitable messages are now displayed on the connected monitor. Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in diagnosis. The HPE ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HPE ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to the HPE RBSU (ROM based setup utility) user guide:
Extensible Firmware Interface (UEFI) or Legacy Mode
specifications which supports both legacy boot and UEFI boot operation. The HPE ProLiant Xl170r Gen9 defaults to UEFI boot operation and can be factory or field configured for Legacy boot operation.
NOTE: For UEFI boot operation, boot environment and OS image installations should be configured properly to support UEFI.
NOTE: For more information on Hewlett Packard Enterprise's ProLiant System BIOS and UEFI, see the
UEFI Information Library: http://www.hpe.com/go/uefi/docs NOTE: HPE Legacy FIO Mode Setting (758959-B22) can be selected to configure the system in UEFI mode in the factory. To modify the server configuration ROM default settings, press F9 in the HPE ProLiant POST screen to enter the UEFI System Utilities screen. By default, the System Utilities menus are in the English language. UEFI enables numerous new capabilities, including both industry standard functionality and features specific to HPE ProLiant servers. Following are some of the features that UEFI enables and that the HPE ProLiant Xl170r Gen9 can support when configured for UEFI boot operation:
Secure Boot - A new feature in which the system firmware, option card firmware, operating
QuickSpecs
HPE ProLiant XL170r Gen9 Server
Standard Features
Page 8
necessary for video operations in Windows.
Storage Controller
Smart Array Controller
AHCI mode is required.
Internal Storage Devices
Internal MicroSD slot
Maximum Internal
Hot Plug LFF SAS 7.2k
18.0TB
3 x 6TB
Hot Plug LFF SATA
18.0TB
3 x 6TB
Hot Plug LFF SATA SSD
1.4TB
3x 480GB
Hot Plug LFF SAS SSD
4.8TB
3x 1.6TB
Hot Plug SFF SAS 7.2k
6TB
6x 1.0TB
Hot Plug SFF SAS 10k
10.8TB
6x1.8TB
Hot Plug SFF SAS 15k
3.6TB
6 x600GB
Hot Plug SFF SATA
6TB
6x1TB
Hot Plug SFF SATA SSD
5.8TB
6x960GB
Hot Plug SFF SAS SSD
9.6TB
6x1.6TB
Interfaces
FlexibleLOM
HPE ProLiant Gen9 servers offer a new networking technology-Flexible
the choice of 1Gigabit, 10Gigabit, InfiniBand or FlexibleLOM solutions
Operating system specific functionality - Microsoft Windows 2012 supports several features only when installed in UEFI mode.
Support for > 2.2 TB (using GPT) boot drives - Such drives could previously only be used for
boot drives when using RAID solutions such as HPE Smart Array.
UEFI Shell - Provides a pre-boot environment for running scripts and tools. The HPE ProLiant
UEFI Shell provides both standard capabilities as well as numerous enhancements.
PXE boot support for IPv6 networks.
• PXE Multicast Boot allowing for faster PXE deployments for large numbers of servers.
• Boot support for option cards that only support a UEFI option ROM.
NOTE: When the server is configured for UEFI Boot Mode, PXE servers must be configured with a UEFI
boot image. When the server boots in UEFI mode, it does not boot media with a legacy OS installation. This includes DOS targets and Windows or Linux systems installed in Legacy mode. The reverse is also true for servers that boot in Legacy mode. If Microsoft Windows 2008 or Windows 2008 R2 is used in UEFI Boot Mode, UEFI Optimized Mode must be disabled (this option is enabled by default). This is required to work around an issue in Windows 2008 / 2008 R2 that requires legacy BIOS components
HPE Dynamic Smart Array B140i Controller HPE Smart Array P440/4G Controller HPE Smart Array P441/4G Controller HPE Smart Array P840/4G Controller HPE Smart Array P841/4G Controller Host Bus Adapter HPE H240 Host Bus Adapter HPE H241 Smart HBA Storage Controller Cable Kits HPE XL170r B140i Cbl FIO Kit HPE XL170r Gen9 Mini-SAS H240 Cbl Kit HPE XL170r Gen9 Mini-SAS P440 Cbl Kit HPE XL1x0r Gen9 Mini-SAS P840/440 Cbl Kit
NOTE: The H240 controller and the embedded B140i will operate in UEFI mode only. For legacy support,
Storage
Network Technology. The HPE ProLiant Gen9 server offers the customer
QuickSpecs
HPE ProLiant XL170r Gen9 Server
Standard Features
Page 9
depending on workload. For further details on the choices, see FlexibleLOM KVM
Serial USB Video Port (SUV)
MicroSD
1 (internal)
USB Ports
2 (external via SUV); 1 USB 3.0 (external); 1 (USB 3.0 internal)
HPE iLO Remote Management Network Port
Aggregated via HPE Apollo 2000 Chassis; Option for dedicated NIC IM Board Kit
Health LED
1
Power
1
UID
1
Do not remove LED
1
Industry Standard
ACPI 2.0b Compliant
PCIe 3.0 Compliant
WOL Support
Microsoft® Logo certifications
PXE Support
USB 1.1,2.0 and 3.0 Compliant
SMBIOS 2.6.1
Power
To review typical system power ratings use the HPE Power Advisor which is available via the online tool
Operating Systems
Microsoft Windows Server
Debian
NOTE: Only 64-bit versions of these operating systems are supported.
matrix.html and our driver download page: https://www.hpe.com/us/en/support.html
Graphics
Integrated Matrox G200 video standard
256 MB DDR 3 with ECC (112 MB after ECC and video)
Form Factor
The ProLiant Xl170r Gen9 Server is a single-slot tray for the HPE Apollo 2000 Chassis.
Compliance
in the Networking Section of this document.
Specifications
and Virtualization Software Support for ProLiant Servers
located at URL: http://www.hp.com/go/proliant-energy-efficient http://www.hp.com/go/hppoweradvisor.
NOTE: Power Specification and Technical Content for supported power supplies can be found at
http://www8.hp.com/h20195/v2/gethtml.aspx?docname=c04111541
Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) Canonical Ubuntu VMware CentOS Fedora OpenSUSE Asianux
NOTE: For more information on the Hewlett Packard Enterprise Certified and Supported ProLiant
Servers for OS and Virtualization Software and latest listing of software drivers available for your server including how to purchase from Hewlett Packard Enterprise , please visit our OS Support Site
http://www8.hp.com/us/en/products/servers/management/operating-environments/os-support-
at:
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HPE iLO 4 On System Management Memory
16 MB Flash
QuickSpecs
HPE ProLiant XL170r Gen9 Server
Standard Features
Page 10
Embedded
HPE Integrated Lights Out
Monitor your servers for ongoing management, service alerting, reporting
http://www.hp.com/go/ilo
UEFI
Configure and boot your servers securely with industry standard Unified
at http://www.hp.com/go/ProLiant/uefi
HPE RESTful API
RESTful API is an application programming interface. RESTful Web Service API served by iLO’s web server http://www.hp.com/go/restfulapi
Intelligent Provisioning
Provision servers by discovering and deploying 1 to few servers with
at http://www.hp.com/go/intelligentprovisioning
Server Utilities
HPE Smart Update
Optimize firmware and driver updates with HPE Smart Update solutions.
http://www.hp.com/go/smartupdate
HPE Systems Insight Manager
HPE SIM allows you to monitor the health of your HPE ProLiant Servers
at http://www.hp.com/go/sim
Scripting Tool Kit and Windows
Provision 1 to many servers using your own scripts to discover and deploy
http://www.hpe.com/go/powershell
HPE RESTful Interface Tool
HPE RESTful API tool is a scripting tool to provision servers using RESTful
HPE iLO Mobile Application
Enables the ability to access, deploy, and manage your server anytime from
HPE Insight Online
HPE Insight Online, available at no additional cost as part of your Hewlett
Learn more at http://www.hp.com/go/insightonline/info.
Embedded
HPE Integrated Lights Out
Monitor your servers for ongoing management, service alerting, reporting
http://www.hp.com/go/ilo.
HPE Insight
HPE Service Pack for ProLiant
HPE Service Pack for ProLiant (SPP) and HPE Smart Update Manager (HPE
maximum uptime. The SPP will be updated at a predictable cadence, typically
SUM and the SPP offer faster
provides 12 months of support for each
Management
(HPE SIM)
PowerShell
and remote management with iLO. Learn more at
Extensible Firmware Interface (UEFI). Learn more
Intelligent Provisioning. Learn more
Learn more at
and HPE Integrity Servers, and also provides you with basic support for non-Hewlett Packard Enterprise servers. HPE SIM also integrates with HPE SUM to provide quick and seamless firmware updates. Learn more
them with HPE Scripting Tool Kit for Windows and Linux or HPE Scripting Tools for Windows PowerShell. Learn more at
http://www.hp.com/go/ProLiantSTK or
API Interface to discover and deploy servers at scale. Learn more at http://www.hp.com/go/restfulapi
anywhere from select smartphones and mobile devices. For additional information please visit: http://www.hp.com/go/ilo/mobileapp
Packard Enterprise warranty, Care Pack or contractual support agreement with Hewlett Packard Enterprise, is a personalized dashboard for simplified
Management
management
(SPP)
software
tracking of IT operations and support information from anywhere, anytime.
and remote management with iLO. Learn more at
SUM) provide a comprehensive approach to firmware and system software maintenance. Together they provide better operating stability and ensure
coinciding with new Hewlett Packard Enterprise server hardware launches. By enabling firmware to be updated online and integrating firmware and system software updates in one operation, HPE updates of individual servers and dramatically faster updates of entire HPE Apollo 2000 Chassis. Further improving system uptime and stability is the fact that Hewlett Packard Enterprise Service Pack for ProLiant release (may vary by region). The user experience around HPE SUM and the SPP has been improved in several ways, starting with the web download. A single web page provides access to a single download containing both the latest version of HPE SUM and the latest SPP. Optional smaller subsets with only specific types of
Loading...
+ 22 hidden pages